+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Hydraulic Cutters, Spreaders, Punches

Hydraulic cutters, spreaders and punches do cutting, separating and hole-making with high force and no sparks, where mechanical methods would be difficult or dangerous.

Flange spreaders open seized joints without damage, nut splitters cut a frozen nut off without harming the bolt, and hydraulic punches make clean holes in plate. Spark-free operation is a real advantage in explosive atmospheres.

11 products
1–11 of 11 productsPer page102550100
▦ Grid☰ List
CH - Cable crimping tool
Hydraulic Equipment

CH - Cable crimping tool

CH series cable lug crimping tools feature C-jaw and parallel guide type options. Models with a 180° rotating head facilitate working in confined spaces. Pump units include the HP227FPC foot-operated pump set. This set also includes an elbow fitting, pressure gauge and block, and a 3-metre hydraulic hose with male coupler. All models except CH1000 include HP227FC, MB1 metal case, the selected crimping tool and its dies. In addition to the standard die sets supplied with each cable crimping tool as specified, optional die sets are also available as shown in the table below. • CH80 and CH63 models are suitable for crimping connectors up to 630 mm² cross-section • CH30, CH32 and CH40 CH-Cable crimping tools are suitable for crimping uninsulated terminals up to 400 mm² cross-section • CH1000 is suitable for crimping transmission and distribution lines up to 1000mm² cross-section • 7 different model options • Die set included with the product • CH21 model is suitable for crimping uninsulated terminals with 240 mm² cross-section • Working pressure 700 bar • Each includes a quick-connect coupler • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces

CT - Hydraulic cutters with integral pump
Hydraulic Equipment

CT - Hydraulic cutters with integral pump

2 models are available capable of cutting 25mm diameter wire rope and 40mm diameter cable. Used for cutting wire rope, metal bar, wire strands and cable. • Cutting capacity up to 40mm • Capable of cutting a wide range of materials • Self-contained hydraulic design

HFS - Hydraulic flange spreaders
Hydraulic Equipment

HFS - Hydraulic flange spreaders

HFS hydraulic flange spreaders ensure the safe separation of pipe flanges in the marine, oil, and gas industries. 2 models are available from 0 - 4.5 tonnes and 0 - 10 tonnes. Both models enable the user to open/spread flanges up to 92 mm thick. Hi-Force hydraulic flange spreaders can be used individually or in pairs for spreading large flanges. The use of hydraulic equipment prevents problems experienced during alternative methods, such as hammer blows causing sparks, damage to flanges, and similar hazards. • Capacities from 4.5 - 10 tonnes • Working pressure 700 bar • Supplied in a steel carrying case • Complete with manually operated pump and hose • Optional wedges in different sizes • Suitable for stud lengths up to 41 mm

HHP - Hydraulic punch
Hydraulic Equipment

HHP - Hydraulic punch

Hi-Force offers the HHP series hydraulic hole punchers with a choice of two models. Model HHP30 is supplied with a 30-tonne capacity and single-acting cylinder, and model HHP50 with a 50-tonne capacity and double-acting cylinder. Delivered in a dedicated carrying case complete with 4 punches and dies. • Punching capacity up to 50 tonnes • Throat depth 70 mm • Working pressure 700 bar

HKP - Hole puncher
Hydraulic Equipment

HKP - Hole puncher

HKP hole punchers are supplied as a set including punches and dies in all standard sizes. They include a hand pump and quick-connect coupler. They are used for punching electrical panels and metal plates during field operations. • 10 ton capacity • Spring return hydraulic cylinder • Working pressure 700 bar

HSWC - Hydraulic wire rope cutters with built-in pump
Hydraulic Equipment

HSWC - Hydraulic wire rope cutters with built-in pump

Easy to transport due to its compact design. In addition to many sectors such as wire rope manufacturing, elevator manufacturing, and construction works, they are also used underwater. 3 models available. • Cutting capacity for wire ropes between 19 mm and 44 mm in diameter • Steel construction • Low-effort operation

MFS - Mechanical flange spreaders
Hydraulic Equipment

MFS - Mechanical flange spreaders

MFS series mechanical flange spreaders are available in 6 different models. • Suitable for bolt diameters up to 31 mm • Maximum opening 231 mm • Requires no external power source

NS&HMNS - Hydraulic nut splitters
Hydraulic Equipment

NS&HMNS - Hydraulic nut splitters

NS and HMNS series hydraulic nut splitters are available in 8 different models with capacities to split hexagon nuts from 17-75 mm AF (M10 - M48). It is the ideal cold-cutting method for splitting and removing corroded nuts made of materials up to RC44 hardness in environments where removal by heating is not permitted. All NS models feature a 360° rotating connection fitting and are suitable for use in confined spaces. HMNS model nut splitters have an integrated hydraulic pump and a multi-position operating lever. All models provide easy operation on flat surfaces and flanges thanks to their angled body design. The cutting blades are manufactured from high-quality steel and can be resharpened or replaced when required. Note: NS, HMNS, and DNS nut splitters are used for heavy-duty nuts. The height of the nut must be equal to or greater than two-thirds of the blade length used. • Capacities from 10 to 75 mm AF • Working pressure 700 bar • Compact, easy to use

SC - Cable lug crimping tools with integral pump
Hydraulic Equipment

SC - Cable lug crimping tools with integral pump

SC series cable crimping tools feature C-jaw or parallel guide type options. All models are equipped with an automatic pressure relief valve. A standard die set and carrying case are supplied with the product. Models with a 180° rotating head facilitate work in confined spaces. In addition to the standard die sets supplied with each cable crimper as specified, optional die sets are also available as shown in the table below. • Model SC21 is suitable for crimping connectors with a cross-section of 240 mm² • Models SC30, SC32 and SC40 are suitable for crimping connectors with a cross-section of 400 mm² • Model SC60 is suitable for crimping non-insulated terminals with a cross-section of 400 mm² • Model SC18X is suitable for crimping non-insulated terminals with a cross-section of 185 mm² • Each includes a quick coupler connection • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces

SJS - Stepped jaw hydraulic spreaders
Hydraulic Equipment

SJS - Stepped jaw hydraulic spreaders

The Hi-Force SJS10 hydraulic spreader offers the ideal solution for wedging, prising and spreading operations in a wide variety of industrial applications. The compact, lightweight, spring assisted return hydraulic cylinder design of the SJS10 offers the user a powerful 13 tonnes spreading capacity. The low clearance jaw tips, manufactured from high strength steel, can easily fit into an 8 mm gap and can provide a total spreading distance of up to 60 mm in 5 operations using the stepped blocks supplied with the tool. Suitable for use at a maximum working pressure of 700 Bar, it is supplied complete with a female quick connect coupler for easy connection to a manually operated or powered hydraulic pump. Many applications require two spreaders operated simultaneously to ensure an even spread of a flanged joint during gasket replacement. The SJS10-TK kit offers the ideal solution and comprises two SJS10 spreaders, manual aluminium pump, control manifold, two pressure gauges and gauge blocks, and hoses. All connections are fitted with quick connect couplings and the set is supplied in a sturdy metal transport and storage case. The SJS10-M offers all the features of the SJS10 with the addition of an integral manual pump. All SJS10 & SJS10-M hydraulic spreaders are supplied with two stepped blocks (to increase spreading distance) and one stepped safety block. The SJS10-TK is supplied with two sets of stepped and safety blocks. Suitable hand pumps and accessories for use with the SJS10 can be found on previous pages. • Capacity 13 tonnes per spreader unit • Supplied with safety block & stepped block • 60mm maximum spreading distance • Single acting, spring assisted return • Compact lightweight design

XHC - Bolt tensioning hoses and ST couplings
Hydraulic Equipment

XHC - Bolt tensioning hoses and ST couplings

Each hose is fitted with quick-connect couplings (male / female) at both ends. Available in 4 standard lengths and also manufactured in different lengths upon request. Spare couplings, nipples and seals are sold separately. • Safety factor 3:1 • Working pressure up to 1500 bar