+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Lifting Attachments

Lifting attachments are specialized equipment designed for the safe gripping, lifting, handling and precise positioning of loads with different shapes, dimensions and surface characteristics. Under its own MARCA Liftough brand, 2M Makina designs and manufactures custom lifting and spreader beams, mechanical grippers, forklift attachments, load turning and positioning devices, and application-specific lifting and handling equipment. The portfolio is further complemented by TAWI vacuum lifting systems, Crosby IP plate lifting clamps, WALMAG magnetic lifters and ATIS industrial manipulators, providing comprehensive solutions for a wide range of industrial applications.

Handling steel plates, profiles, pipes, coils, drums, concrete elements and sensitive industrial components requires careful consideration of load geometry, center of gravity, surface conditions, gripping method and operating environment. Equipment is designed and selected in accordance with applicable requirements of EN 13155 and other relevant European safety standards, depending on the product type. Beyond standard equipment supply, 2M Makina provides custom engineering, design, manufacturing, testing, certification, periodic inspections and technical services, delivering integrated solutions for safe and efficient lifting operations.

24 products

Subcategories

Products in this category

1–24 of 24 productsPer page102550100
▦ Grid☰ List
BUX - BM and BMP series battery-powered lifting magnets
Lifting Attachments

BUX - BM and BMP series battery-powered lifting magnets

• Built-in 12V battery provides at least 8 hours of continuous operation • Handheld infrared remote control operates the magnet from up to 5 m away • Special sensor prevents power cut-off during lifting • Release is performed by pressing two buttons to prevent accidents • Visual and audible low battery warning • If the battery level is too low, the magnet cannot be switched on • Opening cover allows easy access to the battery and control panel • Additional lift and release buttons located on the magnet • LED indicator showing battery charge level and thermal automatic circuit breaker

Forklift crossbeams with hook and boom
Lifting Attachments

Forklift crossbeams with hook and boom

Crossbeams that can be mounted perpendicularly and parallel to forklift forks provide multi-purpose use for your lift trucks. When using the 2M forklift crossbeam, pay attention to the load capacity of the forklift and the load center of gravity.

IP10 Vertical lifting technique
Lifting Attachments

IP10 Vertical lifting technique

The IP10 vertical lifting clamp with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Horizontal pulling load is possible up to an inclination of 15°. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. for surface hardness up to 27 Rc (900 N/mm²), and 10% of the W.L.L. for surface hardness up to 37 Rc (1170 N/mm²).

IP10/S Vertical lifting and transfer of plates
Lifting Attachments

IP10/S Vertical lifting and transfer of plates

For lifting and turning of stainless steel plates The IP10/S and IPU10/S lifting clamps are suitable for lifting, turning (180°) and vertical transfer of stainless steel plates, profiles and fabrications. These lifting clamps feature a stainless steel jaw and pivot to prevent contact corrosion. 1. IPU10/S: With a universal hinged lifting eye moving in all directions, it allows the user to lift and place the load from any direction. 2. IP10/S: Features a fixed lifting eye. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPBC Horizontal lifting clamps with pretension
Lifting Attachments

IPBC Horizontal lifting clamps with pretension

The IPBC pre-tension safety lifting clamp is suitable for lifting plates and steel beams. It can also be used for turning steel beams (from the H-position to the I-position) and on corrugated plates. This lifting clamp exerts a pre-tension on the material being lifted, such that the clamp remains in an upright position on the plate when the load is lifted or when unloaded. IPBC clamps can be used up to a maximum angle of 60°. They can be used individually or in pairs.

IPBTOZ Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBTOZ Shipbuilding clamp for Holland profiles

The IPBTOZ safety lifting clamp is suitable for use as a temporary tackle eye in spaces reinforced with HP (Holland) profiles, such as engine rooms and ship sections. The IPBTOZ lifting clamp is fitted with a threaded spindle for mounting the clamp. It locks automatically as soon as a load is applied. Clamps with higher WLL and different jaw openings (HP profiles) can be manufactured upon request.

IPBU(U)Z Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBU(U)Z Shipbuilding clamp for Holland profiles

The IPBU(U)Z safety lifting clamp is suitable for vertically lifting, transporting and placing Holland profiles onto ship hull sections. The IPBU(U)Z lifting clamp features a locking device ensuring complete safety in both open and closed positions. Used only for Holland profiles (not to be used for standard plates). Available in two versions: 1. IPBUUZ type: With articulated lifting eye. 2. IPBUZ type: With fixed lifting eye. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. up to a surface hardness of 27 Rc (900 N/mm²), and not less than 10% of the W.L.L. up to a surface hardness of 37 Rc (1170 N/mm²).

IPH10 High lifting capacity - Low weight
Lifting Attachments

IPH10 High lifting capacity - Low weight

IPH10 horizontal safety lifting clamps are suitable for lifting and transporting non-sagging and non-deflecting plates in a horizontal position. Lightweight clamp + spring loaded. IPH10 lifting clamps can also be used suspended vertically under a spreader beam. Lateral loading max. 15°. From 2 tons, equipped with magnet and carrying handle. Clamps with higher capacities and different jaw openings can be produced upon request. Ask us for higher load capacities and different jaw openings!

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock
Lifting Attachments

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock

IPHGUZ horizontal safety lifting clamps are suitable for lifting and transferring steel beams and plates. The IPHGUZ lifting clamp is equipped with a locking device for both open and closed positions that ensures complete safety. These clamps are suitable for use on rolling machines, shears, and press brakes. Available in two versions: 1. IPHGZ: Features a fixed lifting eye. 2. IPHGUZ: Features an articulated lifting eye. Clamps with higher WLL and different jaw openings are available upon request. Please refer to the illustration showing lifting angles for correct usage.

IPHNM10 Horizontal transport of plates
Lifting Attachments

IPHNM10 Horizontal transport of plates

IPHNM10 safety lifting clamps (NM stands for non-marring) can be used in all industries where the material must not be damaged while being lifted and transported. To securely grip delicate plates and transport them horizontally, the jaws of the lifting clamp are made of a synthetic material with a high coefficient of friction. This also applies to smooth-surfaced materials, composite materials, and coated plates, or plates with very hard (impenetrable) surfaces.

IPHOZ Horizontal lifting and transport of plates
Lifting Attachments

IPHOZ Horizontal lifting and transport of plates

IPHOZ horizontal safety lifting clamps are suitable for lifting and transporting sagging or bending plates in the horizontal position. Very lightweight design. The maximum vertical lifting angle with IPHOZ clamps is 60°. IPHOZ lifting clamps can also be used with long chains and two-leg slings.

IPSC Compact system for clamping and pulling
Lifting Attachments

IPSC Compact system for clamping and pulling

The IPSC positioning and pulling clamp is suitable for positioning and turning steel plates and sections. It is specially designed for use as a positioning and pulling clamp. Cannot be used as a lifting clamp! Suitable for steel with a surface hardness up to 30 Rc. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPSTARTEC11 Beam clamp
Lifting Attachments

IPSTARTEC11 Beam clamp

The IP - Startec is a clamp specially designed for lifting, turning, and stacking H and I profiles. Thanks to its special construction, the lifting clamp not only performs load lifting, but also enables the stacking and turning of the load. Depending on the size and weight of the beam, 2 separate IP - Startec clamps are offered with different jaw openings.

IPU10 For gripping in all directions and universal lifting
Lifting Attachments

IPU10 For gripping in all directions and universal lifting

Can be loaded from all directions during lifting, turning and transport The universal vertical lifting clamp IPU10 with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Ask for other jaw types and higher load capacities! • Pulling and lifting load can be applied from all directions up to 90° • Maximum safety ensured by a single safety latch • Type DVA can also be delivered • Test certificate, detailed operating instructions, and CE certificate are supplied with delivery.

IPU10A Automatic clamping universal plate clamp
Lifting Attachments

IPU10A Automatic clamping universal plate clamp

The IPU10A plate clamp engages automatically the moment it is placed onto the material. As long as the safety lock remains in the engaged position, it protects against hazardous situations. It is your greatest asset when manual locking is difficult. Please contact us for different load capacities and jaw openings.

Lifting beams with suspension hooks
Lifting Attachments

Lifting beams with suspension hooks

Combinable, adjustable beam-type and H-frame lifting beams A lifting beam can be used for many years in a wide variety of tasks. A lifting beam that is suitable today may perhaps become too large for a new crane system in the future. The Marca lifting beam is fully equipped for this and is always adaptable to modifications. Unsafe and time-consuming modifications are no longer necessary. lifting attachments Guide notches are cut into the steel profile flange faces. With integrated guidance, displacement of the hook plate is prevented and the lifting beam operates more rigidly. Thanks to this new Marca lifting beam design, the construction becomes sturdier and more stable, allowing the load to be safely lifted in a single operation without lowering and re-lifting. This speeds up the handling process. Marca Beam-Type Lifting Beam (including frame hook suspensions) Adjustable length = 1/2 total length Super-compact design with extremely robust special steel. The hooks of modern crane systems are now manufactured smaller from high-alloy steel, which is why older lifting beams no longer fit. Marca lifting beams are interchangeable and can be adjusted at a later stage.

Magnetic claws used on cranes
Lifting Attachments

Magnetic claws used on cranes

The magnetic claw is suitable for vertical or horizontal lifting. Lifted sheet metals can be turned from a vertical to a horizontal position or vice versa. Only 1 magnet is required for sheet dimensions of 1000x2000 mm, and 2 lifting magnets with a small spreader beam are required for 1500x3000 mm sheets. **With double safety when used on cranes ***3-fold safety when used on cranes. Safely used on ground St37k steel up to a thickness of 25 mm. Please note! Full holding force is only achieved on materials with smooth, flat, clean surfaces, good magnetizability, and sufficient thickness. On rusted and scaled materials, the holding force is 2/3 for magnetic claws and 50% for load lifting magnets.

2M
Lifting Attachments

Marca forklift fork crossbeam

Marca forklift fork crossbeams can be applied to forklifts of all sizes. Standardly manufactured up to 10 tons, crossbeams can also be ordered with higher load capacities upon request. We recommend using a swivel hook on fork crossbeams. • No loss of lifting height thanks to low headroom • Manufactured to your required dimensions • Delivered galvanized upon request • Swivel suspension hook is available as standard. Optional equipment: Ball-bearing swivel hook for rotating under load.

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)
Lifting Attachments

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)

Marca-Drum clamp VFR is highly suitable for stacking upright rimmed drums. The hold-open lever enhances its easy and simple usability.

Marca-Plate lifting clamp: TLH - TLR
Lifting Attachments

Marca-Plate lifting clamp: TLH - TLR

Marca-TLH type plate lifting clamp helps you horizontally transport single or multiple plates up to 150 mm thickness and a capacity of up to 5 tons/pc. TLR type clamps allow you to transport plates or bundles up to 300 mm thickness.

New double hook
Lifting Attachments

New double hook

Lifting accessories such as round slings or webbing slings must not lie on top of each other on the hook, as there is a risk of damage due to crushing of the lower element. By distributing the lifting accessories across both hooks, damage or a reduction in load capacity is prevented.

Round and flat curbstone clamp
Lifting Attachments

Round and flat curbstone clamp

Manually adjustable or fixed curb clamp for curbstones or similar materials and round parts. A clamping force directly proportional to the load is generated through the high-alloy steel construction, and the load must be resistant to the pressure resulting from this clamping force. The load's center of gravity must be centered. Two clamps must be used for long parts. • Extra large gripping arms providing easy grip • Adjustment is made via latch (on adjustable models) • Simple jaw design (provides a minimum friction coefficient of 0.4 μ) • Secutex impact-protection jaws (jaw opening reduced by 20 mm)

TAWI VacuEasylift
Lifting Attachments

TAWI VacuEasylift

Special Atex-certified TAWI vacuum lifting products are available for flammable and explosive environments. VacuEasylift is an original vacuum lifting system that lifts, lowers, rotates, and turns loads under continuous vacuum. Under heavy working conditions, it allows the operator to perform manual lifting and transferring operations effortlessly and without health risks. VacuEasylift is a manual vacuum lifting system suitable for almost any type of load. It is available in 10 different models for boxes and sacks, sheets, panels, crates, bales, drums, and loads weighing up to a maximum of 270 kg. For gripping and lifting loads, vacuum lifting, lowering, and releasing operations are carried out using the same control handle under a highly steady and rapid working pace. Designed according to a unique operating principle, VacuEasylift was introduced to the market after an extensive development process with input from customers and VacuEasylift users to achieve simpler, safer, and more efficient lifting operations. Enabling operations that previously required two operators to be carried out by a single operator thanks to VacuEasylift ensures your investment pays for itself in a short time. In addition, VacuEasylift delivers a comprehensive combination of efficiency, ergonomics, and economy unmatched by any other lifting system. VacuEasylift models can be suspended from Lyftman jib and bridge crane systems made of aluminium and steel. Lift tubes in variable lengths and capacities can be suspended from jib arms and overhead travelling bridge cranes.

2M
Lifting Attachments

We make plate handling and turning easy

Thanks to Walmag plate lifting and turning magnets, you can lift and transport plates in a horizontal position and use them by turning 90°. When lifting plates from a stack, the magnet's feature allows you to lift plates individually or in multiples. Safe handling is ensured thanks to the safety on/off lever, turning bar, and suspension eye. • Telescopic lifting arm suitable for turning plates 90° • Convenient structure providing horizontal lifting and turning for drilling and beveling • Suitable for plates of various sizes • Lifting arm is compatible with all NEO type magnets.