+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Hydraulic Cylinders

Hydraulic cylinders turn pump pressure into linear force. Single-acting, double-acting, low-profile, hollow-plunger and lock-nut types each suit different work.

Stroke, closed height and the return method matter as much as capacity. In heavy machine lifting and assembly, several cylinders are run in synchronisation to keep the load level.

17 products
1–10 of 17 productsPer page102550100
▦ Grid☰ List
BW - Backup wrench
Hydraulic Equipment

BW - Backup wrench

BW series backup wrenches prevent the bolt being tightened from rotating and provide easy tightening and removal using a lever to prevent nut kickback. Once clamped, the T-Bar design adjustable reaction point remains locked until the operation is completed. • Suitable for use with TWS-N and TWH-N torque wrenches • Interchangeable hexagon links • Positive release mechanism

HAS - Single-acting lightweight aluminium cylinders
Hydraulic Equipment

HAS - Single-acting lightweight aluminium cylinders

HAS series single-acting lightweight aluminium cylinders are specially designed for applications where weight and ease of handling are primary considerations. With a body 50% lighter compared to steel cylinders, all models are corrosion protected and waterproof, featuring lifting capacities from 32 ton to 100 ton at 700 Bar pressure. All models have a wide range of applications and provide safe operation in shipyards, steel fabrication shops, construction, and power plants. Other capacities and stroke lengths are custom manufactured upon request. Aluminium cylinders provide advantages during operation due to being lighter compared to steel body cylinders. However, due to the nature of the material, they are not recommended for applications requiring prolonged use. The recommended service life is approximately 5000 operations at maximum pressure. This lifespan can be extended depending on the most frequently used capacity and maintenance intervals. • Working pressure 700 Bar • Capacity between 32 ton and 110 ton • 152 mm stroke • Working pressure 700 Bar • Capacity between 18 ton and 52 ton • 51 to 105 mm stroke

HFG - Single-acting lock nut hydraulic cylinders
Hydraulic Equipment

HFG - Single-acting lock nut hydraulic cylinders

HFG type single-acting lock nut cylinders combine hydraulic lifting power with mechanical load holding safety. HFG cylinders are ideally used in piling and bridge/viaduct support applications where loads need to be held for extended periods. Once the load is hydraulically lifted, the lock nut on the threaded piston is screwed down against the cylinder body, mechanically securing the load. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 50 mm • Single-acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiting device • Special seals • Standard tilting saddles

HFL - Single acting lock nut short type hydraulic cylinders
Hydraulic Equipment

HFL - Single acting lock nut short type hydraulic cylinders

HFL type single acting lock nut short type cylinders combine hydraulic lifting power with the safety of mechanical load support. Ideally, HFL cylinders are used in piling and bridge/viaduct support applications where the load must be held for extended periods. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 45 mm • Single acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiter • Special seals • Standard tilting saddles • Manufactured with optional capacity and stroke upon request.

HHR - Double acting hollow hydraulic cylinders
Hydraulic Equipment

HHR - Double acting hollow hydraulic cylinders

HHR - Double acting (push/pull) hollow cylinders share the same design features as single acting HHS type cylinders, while offering additional capabilities due to their double acting operation. They provide wider application possibilities, especially in long-stroke cylinders, by substantially increasing operating speed and providing an additional pulling (retraction) force. The listed HHR cylinders are standard models and can be manufactured with different capacities and strokes upon request. • Lifting capacity from 33 to 247 tonnes • 700 bar maximum operating pressure • Stroke lengths from 51 to 305 mm • Double acting design providing separate push and pull forces • Overload relief valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston saddles • Threaded cylinder collars

HHS - Single-acting hollow hole, spring return hydraulic cylinders
Hydraulic Equipment

HHS - Single-acting hollow hole, spring return hydraulic cylinders

11 different cylinder models across 5 distinct capacities from 11 tons to 102 tons with a 700 bar working pressure HHS - Single-acting spring return hollow hole cylinders find wide application particularly in various maintenance and repair, pulling, and bolting applications. Thanks to the through-hole design, bolts/studs or cables/wire ropes can be passed through the centre for pulling and tensioning operations, and they are also utilized in pre-tensioning and pressing applications as well as testing various welded or mechanical connections. When equipped with standard piston heads (included in the set), HHS cylinders can also be used comfortably for regular lifting operations. • 11 to 102 ton lifting capacity • 700 bar maximum operating pressure • Stroke lengths from 25 to 152 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special sealing elements • Optional piston heads • Threaded cylinder collars

HLS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HLS - Single acting spring return hydraulic cylinders

At 700 bar operating pressure, cylinders in 6 different capacities and 10 different models from 10 tons to 150 tons HLS - Short Cylinders, the cylinders with the widest field of application worldwide, provide solutions with their spring return design, short closed height, and optimum stroke lengths. Widely used in power plants, shipyards and repair-maintenance workshops, construction and railways, mining and iron-steel industries, as well as oil and gas facilities, HLS type short cylinders offer an economical and portable solution thanks to their compact and powerful construction. • Capacities from 10 to 147 tons • 700 bar maximum operating pressure • Stroke lengths from 25 to 60 mm • Spring return design

HPS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HPS - Single acting spring return hydraulic cylinders

Short stroke special profile hydraulic cylinders in 9 different models and 8 capacities at 700 bar working pressure HPS - Pad type short cylinders offer a very practical closed height and stroke combination. These spring return cylinders are ideal for use where minimum closed height and maximum stroke length are critical. HPS type cylinders are especially used in maintenance and repair work, steel construction, weld surface alignment, and flange spreading applications. • Capacities from 4.5 to 147 tons • 700 bar maximum operating pressure • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals

HSS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HSS - Single acting spring return hydraulic cylinders

HSS - Multi-purpose single acting spring return cylinders find excellent application across maintenance and repair, transport, production, and manufacturing/construction sectors with a wide range of capacities, closed heights, and stroke lengths. All models feature threaded cylinder collars, and the cylinder base and piston rod ends are ready for easy mounting. • Lifting capacity from 4.5 to 109 tonnes • 700 bar maximum working pressure • Stroke lengths from 25 to 457 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals • Optional tilting piston saddles • Threaded cylinder collars