+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Hydraulic Pumps, Hoses, Gauges

The power side of a hydraulic system: hand, electric and air-driven pumps, high-pressure hoses, couplers, gauges and valves.

A system is only as safe as its weakest link, so hose and coupler working pressures must match the cylinder they feed. The gauge is not just an indicator — it is the safety component you read the load from.

26 products
1–25 of 26 productsPer page102550100
▦ Grid☰ List
AHP - Air-driven hydrotest pumps - Standard flow
Hydraulic Equipment

AHP - Air-driven hydrotest pumps - Standard flow

• Output pressure ranging from 6 to 2931 bar • Suitable for use with various fluids • 150 mm diameter dual-scale pressure gauge • Air consumption 0.79 m³/min • Variable output flow rate • Maximum weight 23 kg • Includes air inlet filter, pressure regulator, and lightweight oil tank • 8 different models available with pressure capacities ranging from 6 bar to 2931 bar • Optional stainless steel tank produced • Optional IP65-rated piston-mounted microswitch stroke counter available

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow
Hydraulic Equipment

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow

Hi-Force AHP-CR series air driven hydrostatic pressure test pumps are offered to users in 8 models with different capacities ranging from 6 bar (87 PSI) up to 2931 bar (42500 PSI). Fitted as standard on all pumps is a chart recorder capable of recording values on a single chart for up to 4 hours. All models are suitable for operation with various fluids including water, and feature a glycerine-filled pressure gauge, air inlet filter, lubricator and pressure regulator unit, plastic fluid reservoir, pump start/stop valve, and a reinforced stainless steel skid frame. A recorder by-pass valve and pressure release valve are fitted on the pump as standard. Optionally, a stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorders with different clock speeds can be supplied. All units have a maximum weight of 31kg. • Output pressure up to 2931 Bar • Suitable for use with various fluids • 150mm dual scale anti-vibration pressure gauge • Air consumption 28 scmf (0.79 m/min) • Infinitely variable output pressure and flow • 7 litre capacity • Supplied with 50 recording charts, 1 chart pen, with additional charts and pens available.

AHP11 - Single-Stage Air Hydraulic Pump
Hydraulic Equipment

AHP11 - Single-Stage Air Hydraulic Pump

Working pressure is 700 bar, operating with 7 bar air pressure. The compact, lightweight and powerful AHP11 single-stage air-driven hydraulic power unit is an economical and mobile (portable) alternative to manual pumps. The pump pedal is suitable for both foot and hand operation. All pumps are delivered with the oil reservoir pre-filled with oil, ensuring the pumps are ready for use immediately upon supply. • 2-way and 4-way control valve options • Internal overload safety relief valve • Oil reservoir level indicator • Standard oil reservoir capacity up to 10 litres

AHP2 - Air driven hydrotest pumps - High flow
Hydraulic Equipment

AHP2 - Air driven hydrotest pumps - High flow

AHP2 series air driven hydrostatic pressure test pumps offer 5 different model options with output pressure capacities ranging from 17 Bar (246 PSI) to 1634 Bar (23700 PSI). All models feature a compact design and operate compatibly with various fluids, while incorporating a 150mm diameter glycerine filled pressure gauge, air filter, lubricator and pressure regulator, lightweight fluid reservoir, pump on/off valve, and a reinforced stainless steel protective cage. Optional stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorder with various clock speeds can be supplied. • Output pressure ranging from 17.2 to 1634.1 bar • Suitable for use with various fluids • 150 mm diameter dual scale pressure gauge • Air consumption 1.59 m³/min • Variable output pressure and flow rate • Air inlet filter, pressure regulator, lightweight oil tank standard • Optional stainless steel tank available • Optional IP65 class piston-mounted microswitch stroke counter available

ATDP - Air-driven double-acting twin hydrotest pumps
Hydraulic Equipment

ATDP - Air-driven double-acting twin hydrotest pumps

Air-driven twin double-acting ATDP series hydrotest pumps are available in 3 different models with capacities ranging from 87 bar to 1489 bar. Thanks to the twin double-acting design, the fluid volume delivered per stroke is significantly higher compared to the AHP and AHP2 series. All models feature a 150mm diameter glycerine-filled pressure gauge, air inlet filter, regulator, lubricator unit, and pump on/off valve. If the pump is to be used with special fluids or chemicals, it can be manufactured with Viton and ethylene propylene seals upon order. Seals made of different materials can be manufactured upon request. • Output pressure ranging from 87 to 1489 bar • Suitable for use with various fluids • Twin double-acting design allows high-volume flow • Air consumption: 6m³/min • Can be used with various fluids, including water • 150mm diameter dual scale pressure gauge • Variable output pressure and flow • Air inlet filter, regulator and lubricator • Optional stainless steel reservoir available, IP65 rated piston-mounted microswitch stroke counter available • Weather-resistant paint finish, pressure isolation valve

BC - Battery-powered cable lug crimping tools
Hydraulic Equipment

BC - Battery-powered cable lug crimping tools

The battery-operated lug crimping tools in the BC range include 4 models, offering either a “C” shaped jaw or a parallel guide design with a 360-degree rotating head. While providing all the versatility of the manually operated CH and SC range, this product range increases speed and offers ease of use due to battery operation. All models are supplied with a battery charger, shoulder strap, and tool storage case. In addition to the standard die sets supplied with each crimping tool as indicated, optional die sets are also available as shown in the table below. • Supplied with a standard die set • Battery status • Efficient and fast battery charging

Control/Directional valves
Hydraulic Equipment

Control/Directional valves

PMV type flow control valves are mounted on the pump. RMV type flow control valves can be mounted remotely from the pump. • Working pressure 700 bar • Can be mounted on the pump or at a different location • Manual and solenoid types are available

Digital pressure gauges
Hydraulic Equipment

Digital pressure gauges

Driven by the demand for digital gauges, Hi-Force has added the HDG1 and HDD1 digital gauges to its product range, as well as the HPT1 pressure transducer featuring the HDD1 gauge. Offering users higher accuracy (0.5% terminal point accuracy), these models represent a significant advancement compared to dial gauges with 1% accuracy. HPT1 pressure transducers also provide users with the option of remote pressure reading, which is preferred in certain applications. • Pressure measurement capability up to 1.000 Bar (14.503 PSI) • Readout in Bar, PSI, mPa, kg/cm³ units as well as other user-defined measuring units via the programmable unit • Compatible with a wide variety of fluids thanks to laser-welded stainless steel sensor and socket • Tare function, minimum and maximum memory, blue backlit display, rubber protective boot and IP67 waterproof enclosure • Minimum 2.000 hours battery life

HAP - Air-driven two-stage pumps
Hydraulic Equipment

HAP - Air-driven two-stage pumps

The HAP two-stage air-driven hydraulic power unit provides a flow rate of 10 l/min at low pressure and automatically switches down to a flow rate of 1.3 l/min at 700 bar pressure. It is driven by a 3 kW electric motor. It consumes 2.4 m³ of air per minute with a 7 bar air inlet. Pump-mounted or remotely connected valve types and oil reservoirs are available. Oil reservoirs feature drain and filler plugs. • 2-stage hydraulic pump • Powerful air motor • External, adjustable pressure relief valve • Selectable control valves • 10 l/min flow rate at low pressure (up to 70 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HCC - Hydraulic chain cutters
Hydraulic Equipment

HCC - Hydraulic chain cutters

Suitable for cutting high-tensile grade 80, 100, 120 chain and reinforced steel bars Cutting capacity between 26 mm and 46 mm diameters Equipped with an overload protection valve as standard. • Working pressure 700 bar • Spring return cylinder • Safety lock system closed over the chain during cutting • Special blade for cutting grade 100 and 120 chain on request

HDA - Double acting hydraulic cylinders
Hydraulic Equipment

HDA - Double acting hydraulic cylinders

HDA - Double acting (push/pull) cylinders find a wide range of applications, particularly in heavy lifting, construction and maintenance work, press and test applications, thanks to their robust double acting structure, high capacity, efficiency, and high pulling forces. On all models, the cylinder collars are threaded, and the cylinder base and piston heads are ready for use for easy mounting. In addition, the listed HHR cylinders are standard production items and can be manufactured in different capacities and strokes upon request. • Lifting capacity from 25 to 520 tons • 700 bar maximum operating pressure • Stroke lengths starting from 152 mm • Double acting design providing separate forces in push and pull • Overload valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston heads • Threaded cylinder collars

HEP1 - Electric power units
Hydraulic Equipment

HEP1 - Electric power units

110 and 220 volt single-phase motor, 700 bar max. working pressure. 2.0 and 3.0 litre flow rate at low pressure. 0.25 and 0.4 litre flow rate options at high pressure. Used with high efficiency with single- and double-acting Hi-Force cylinders via 2-way directional control valves and electric solenoid valves.

HEP103 - Two-stage electric hydraulic power unit
Hydraulic Equipment

HEP103 - Two-stage electric hydraulic power unit

Note: For models with an adjustable pressure switch for automatic pressure control, the letters PS must be added to the model number. For models with a pushbutton pendant control, the letters HB must be added to the model number. • Operating pressure 700 bar • Choice of valve types • Compact, lightweight and powerful • Suitable for single and double-acting cylinders • Pump-mounted control lever, pressure gauge and wired remote control

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate
Hydraulic Equipment

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate

HEP 2 Series 2-stage electric hydraulic pump provides a flow rate of 5 to 11 lt/dk at low pressure and 0.65 lt/dk at high pressure. It offers the capability to operate on 110 V, 240 V single-phase and 440 V three-phase voltages. Remote control capability via electric solenoid valves provides high-efficiency operation with single- and double-acting Hi-Force cylinders. Equipped as standard with an external pressure adjustment valve, a 10 and 25 lt oil reservoir, and an oil level dipstick, these pumps can optionally be ordered with accessories such as a pressure gauge set, hydraulic manifold, carrying handle, etc.

HEP3 - Two-stage electric hydraulic power unit-High flow
Hydraulic Equipment

HEP3 - Two-stage electric hydraulic power unit-High flow

HEP 3 Series pumps have the same features as the HEP 2 series, but additionally provide a higher flow rate. (1lt/min high pressure flow rate) HEP 3 Series pumps are ideal for applications requiring speed with higher capacity and longer stroke cylinders or hydraulic equipment. Suitable for continuous operation, these pumps are suitable for outdoor or indoor use with their totally enclosed fan-cooled and quiet operation features.

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate
Hydraulic Equipment

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate

HEP 5 Series pumps deliver the highest flow rate among electric power units. With a low-pressure flow rate of 4 to 17 l/min and a high-pressure flow rate of 2 l/min, these HEP 5 series pumps produce 2.2 kW of power and a maximum pressure of 700 bar. As with all pumps, the transition from low pressure to high pressure occurs at 70 bar.

High pressure couplers and fittings
Hydraulic Equipment

High pressure couplers and fittings

All hydraulic pressure couplers, fittings, valves, and hoses are designed and manufactured for a maximum working pressure of 700 bar. Featuring a 4:1 safety factor, all these accessories have 3/8" - 18 NPT ports, ensuring the safe operation of your hydraulic system. All components are easily interchangeable and mutually compatible. Hi-Force recommends the use of protective dust caps to protect quick connect couplers from dust and dirt.

High-pressure hydraulic hoses
Hydraulic Equipment

High-pressure hydraulic hoses

Hi-Force high quality hydraulic hoses provide a secure connection for hydraulic equipment. Available in black and red colours. Both ends of the hose feature anti-kink handle guards. Using black hoses for advance flow connections and red hoses for return connections prevents potential misconnections. • Working pressure 700 bar • 4:1 safety factor • Custom lengths available to order

HP - Hand Pumps Steel and aluminium body
Hydraulic Equipment

HP - Hand Pumps Steel and aluminium body

All pumps are delivered with the oil tank filled with oil, making the pumps ready for use immediately upon supply. Various pump models are available for use with single- and double-acting cylinders. HP-class pumps are most commonly utilized when completely independent and mobile (portable) pumps are required. hydraulic equipment • Single- and two-speed pumps • 700 bar working pressure • 13 different models, single- and double-acting • Metal construction • Oil capacity from 1 litre to 10 litres • 2-, 3- and 4-way control valve options • Standard pressure relief valve and overload valve • Operation with minimum handle effort • Durable all-steel construction

HPP - Petrol engine hydraulic power units
Hydraulic Equipment

HPP - Petrol engine hydraulic power units

• 10 l/min flow rate at low pressure (up to 700 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HSP - Electric driven split flow, multi-outlet pumps
Hydraulic Equipment

HSP - Electric driven split flow, multi-outlet pumps

HSP series electric driven split-flow hydraulic pumps are designed to distribute an equal volume of oil from each control valve, regardless of any variation in hydraulic pressure. In this series, various options are offered, ranging from a 2-outlet model with manual directional control valves to an 8-outlet model with electric solenoid valves. Each valve outlet is directly connected to an independent electric-driven internal piston pump. This technology allows each internal piston pump to deliver an equal volume of oil per unit time, irrespective of changes in operating pressure at each control valve outlet. With the HSP split-flow pump, large, unequally weighted loads can be lifted in a synchronized, level, and controlled manner using multiple lifting points. In the electric valve option, each valve is controlled via an electrical control box with on/off switches. Additionally, a synchronized lifting button is provided for each control valve. The maximum working pressure of all HSP pumps is 700 bar, and an adjustable relief valve is located at each outlet for easy pressure control between 70-700 bar. All system components are detailed in the following pages. Optional equipment includes a PLC-controlled synchronized lifting/lowering system capable of setting the target lifting weight, maximum tolerance between lifting points, and other fine adjustments (all controlled by a central touchscreen computer). This system offers a precise solution especially for controlled lowering operations. • Working pressure 700 Bar • Multiple outlet valve options • Precise control for synchronized lifting movement

Manifolds
Hydraulic Equipment

Manifolds

Hi-Force manifolds are specially designed to distribute hydraulic flow as required. Both open-type manifolds and valve-controlled (shut-off/throttling) type manifolds are available. All valve outlets are 3/8". There are 9 different manifold models available with up to 8 outlets. Compatible with single-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, with all components mounted on the unit. Compatible with double-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, and includes 4 open manifolds for return flow. All components are mounted on the unit. • Working pressure 700 bar • Open or valve-type manifold options • Models with 2, 4, 5, 6, or 8 outlets

MHP - Manual hydrotest pump
Hydraulic Equipment

MHP - Manual hydrotest pump

Hi-Force MHP series 2-speed manual hydraulic pumps can be used with a wide variety of fluids, including water. Manufactured from aluminium alloy, they are extremely lightweight and offer versatile use. Featuring a semi-automatic stage changeover and 2-stage piston design, they provide a high flow rate up to 20 bar pressure. Available in 5 different models with working pressures from 100 bar up to 1000 bar, they are supplied with a 610 mm long pump handle. Primary areas of application include pipelines, pressure vessels, pressure valve applications, and all similar pressurised applications. • Working pressure up to 1000 bar • Suitable for use with various fluid types • Flow rate adjusted according to pressure via semi-automatic stage changeover • Stainless steel pistons and lightweight aluminium pump construction • Needle-type pressure release valve for precise pressure control • Economical, replaceable valve seats • 15-litre fluid reservoir as standard • Optional pressure gauges available

Pressure Gauges
Hydraulic Equipment

Pressure Gauges

Hydraulic pressure gauges with a clear, precise dual scale act as a window into the system for you. We recommend using a pressure gauge so that you can continuously monitor the system. All pressure gauges are manufactured in accordance with BS EN 837-1 and operate with ±1% accuracy of full scale. Always use the pressure gauge and adaptor suitable for the original system and your application. Calibration certificate is provided upon request.

SBT - Spring return bolt tensioners-Imperial
Hydraulic Equipment

SBT - Spring return bolt tensioners-Imperial

Note: Weight is for load cell and bridge only. Total weight of complete assembly depends on puller size and nut rotating socket selected. Tommy bar is not included. Hi-Force recommends one tommy bar for every 4 tensioners.