+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Lifting Clamps

Lifting clamps grip plate and profile directly — no hole to drill, no sling to thread — with separate models for vertical lifting, horizontal transport and 90° turning.

Grip force is derived from the weight of the load itself, so the minimum working load and jaw opening matter as much as the rated capacity. The jaw teeth are a wear part and must be replaced on a schedule.

14 products
1–10 of 14 productsPer page102550100
▦ Grid☰ List
IP10 Vertical lifting technique
Lifting Attachments

IP10 Vertical lifting technique

The IP10 vertical lifting clamp with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Horizontal pulling load is possible up to an inclination of 15°. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. for surface hardness up to 27 Rc (900 N/mm²), and 10% of the W.L.L. for surface hardness up to 37 Rc (1170 N/mm²).

IP10/S Vertical lifting and transfer of plates
Lifting Attachments

IP10/S Vertical lifting and transfer of plates

For lifting and turning of stainless steel plates The IP10/S and IPU10/S lifting clamps are suitable for lifting, turning (180°) and vertical transfer of stainless steel plates, profiles and fabrications. These lifting clamps feature a stainless steel jaw and pivot to prevent contact corrosion. 1. IPU10/S: With a universal hinged lifting eye moving in all directions, it allows the user to lift and place the load from any direction. 2. IP10/S: Features a fixed lifting eye. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPBC Horizontal lifting clamps with pretension
Lifting Attachments

IPBC Horizontal lifting clamps with pretension

The IPBC pre-tension safety lifting clamp is suitable for lifting plates and steel beams. It can also be used for turning steel beams (from the H-position to the I-position) and on corrugated plates. This lifting clamp exerts a pre-tension on the material being lifted, such that the clamp remains in an upright position on the plate when the load is lifted or when unloaded. IPBC clamps can be used up to a maximum angle of 60°. They can be used individually or in pairs.

IPBTOZ Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBTOZ Shipbuilding clamp for Holland profiles

The IPBTOZ safety lifting clamp is suitable for use as a temporary tackle eye in spaces reinforced with HP (Holland) profiles, such as engine rooms and ship sections. The IPBTOZ lifting clamp is fitted with a threaded spindle for mounting the clamp. It locks automatically as soon as a load is applied. Clamps with higher WLL and different jaw openings (HP profiles) can be manufactured upon request.

IPBU(U)Z Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBU(U)Z Shipbuilding clamp for Holland profiles

The IPBU(U)Z safety lifting clamp is suitable for vertically lifting, transporting and placing Holland profiles onto ship hull sections. The IPBU(U)Z lifting clamp features a locking device ensuring complete safety in both open and closed positions. Used only for Holland profiles (not to be used for standard plates). Available in two versions: 1. IPBUUZ type: With articulated lifting eye. 2. IPBUZ type: With fixed lifting eye. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. up to a surface hardness of 27 Rc (900 N/mm²), and not less than 10% of the W.L.L. up to a surface hardness of 37 Rc (1170 N/mm²).

IPH10 High lifting capacity - Low weight
Lifting Attachments

IPH10 High lifting capacity - Low weight

IPH10 horizontal safety lifting clamps are suitable for lifting and transporting non-sagging and non-deflecting plates in a horizontal position. Lightweight clamp + spring loaded. IPH10 lifting clamps can also be used suspended vertically under a spreader beam. Lateral loading max. 15°. From 2 tons, equipped with magnet and carrying handle. Clamps with higher capacities and different jaw openings can be produced upon request. Ask us for higher load capacities and different jaw openings!

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock
Lifting Attachments

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock

IPHGUZ horizontal safety lifting clamps are suitable for lifting and transferring steel beams and plates. The IPHGUZ lifting clamp is equipped with a locking device for both open and closed positions that ensures complete safety. These clamps are suitable for use on rolling machines, shears, and press brakes. Available in two versions: 1. IPHGZ: Features a fixed lifting eye. 2. IPHGUZ: Features an articulated lifting eye. Clamps with higher WLL and different jaw openings are available upon request. Please refer to the illustration showing lifting angles for correct usage.

IPHNM10 Horizontal transport of plates
Lifting Attachments

IPHNM10 Horizontal transport of plates

IPHNM10 safety lifting clamps (NM stands for non-marring) can be used in all industries where the material must not be damaged while being lifted and transported. To securely grip delicate plates and transport them horizontally, the jaws of the lifting clamp are made of a synthetic material with a high coefficient of friction. This also applies to smooth-surfaced materials, composite materials, and coated plates, or plates with very hard (impenetrable) surfaces.

IPHOZ Horizontal lifting and transport of plates
Lifting Attachments

IPHOZ Horizontal lifting and transport of plates

IPHOZ horizontal safety lifting clamps are suitable for lifting and transporting sagging or bending plates in the horizontal position. Very lightweight design. The maximum vertical lifting angle with IPHOZ clamps is 60°. IPHOZ lifting clamps can also be used with long chains and two-leg slings.

IPSC Compact system for clamping and pulling
Lifting Attachments

IPSC Compact system for clamping and pulling

The IPSC positioning and pulling clamp is suitable for positioning and turning steel plates and sections. It is specially designed for use as a positioning and pulling clamp. Cannot be used as a lifting clamp! Suitable for steel with a surface hardness up to 30 Rc. Clamps with higher WLL and different jaw openings can be manufactured upon request.