+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Magnetic Lifters

Magnetic lifters hold ferromagnetic material with permanent-magnet force and make a lift possible in seconds, markedly speeding up handling in plate stores, laser cutting and machining lines.

Real capacity varies with material thickness, surface roughness, air gap and grade — so the figure to work to is the safe working load calculated for the application, not the catalogue headline.

3 products
1–3 of 3 productsPer page102550100
▦ Grid☰ List
BUX - BM and BMP series battery-powered lifting magnets
Lifting Attachments

BUX - BM and BMP series battery-powered lifting magnets

• Built-in 12V battery provides at least 8 hours of continuous operation • Handheld infrared remote control operates the magnet from up to 5 m away • Special sensor prevents power cut-off during lifting • Release is performed by pressing two buttons to prevent accidents • Visual and audible low battery warning • If the battery level is too low, the magnet cannot be switched on • Opening cover allows easy access to the battery and control panel • Additional lift and release buttons located on the magnet • LED indicator showing battery charge level and thermal automatic circuit breaker

Magnetic claws used on cranes
Lifting Attachments

Magnetic claws used on cranes

The magnetic claw is suitable for vertical or horizontal lifting. Lifted sheet metals can be turned from a vertical to a horizontal position or vice versa. Only 1 magnet is required for sheet dimensions of 1000x2000 mm, and 2 lifting magnets with a small spreader beam are required for 1500x3000 mm sheets. **With double safety when used on cranes ***3-fold safety when used on cranes. Safely used on ground St37k steel up to a thickness of 25 mm. Please note! Full holding force is only achieved on materials with smooth, flat, clean surfaces, good magnetizability, and sufficient thickness. On rusted and scaled materials, the holding force is 2/3 for magnetic claws and 50% for load lifting magnets.

2M
Lifting Attachments

We make plate handling and turning easy

Thanks to Walmag plate lifting and turning magnets, you can lift and transport plates in a horizontal position and use them by turning 90°. When lifting plates from a stack, the magnet's feature allows you to lift plates individually or in multiples. Safe handling is ensured thanks to the safety on/off lever, turning bar, and suspension eye. • Telescopic lifting arm suitable for turning plates 90° • Convenient structure providing horizontal lifting and turning for drilling and beveling • Suitable for plates of various sizes • Lifting arm is compatible with all NEO type magnets.