+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Spreader Beams and Special Attachments

Spreader beams take the load at several points, bringing the sling legs upright and removing the compressive force a plain sling would put into the load. On long, slender or fragile items they are all but mandatory.

Fixed, adjustable and telescopic models are available alongside purpose-designed beams. The design accounts for hook distance and centre of gravity as well as capacity, and units are certified under EN 13155.

6 products
1–6 of 6 productsPer page102550100
▦ Grid☰ List
Forklift crossbeams with hook and boom
Lifting Attachments

Forklift crossbeams with hook and boom

Crossbeams that can be mounted perpendicularly and parallel to forklift forks provide multi-purpose use for your lift trucks. When using the 2M forklift crossbeam, pay attention to the load capacity of the forklift and the load center of gravity.

Lifting beams with suspension hooks
Lifting Attachments

Lifting beams with suspension hooks

Combinable, adjustable beam-type and H-frame lifting beams A lifting beam can be used for many years in a wide variety of tasks. A lifting beam that is suitable today may perhaps become too large for a new crane system in the future. The Marca lifting beam is fully equipped for this and is always adaptable to modifications. Unsafe and time-consuming modifications are no longer necessary. lifting attachments Guide notches are cut into the steel profile flange faces. With integrated guidance, displacement of the hook plate is prevented and the lifting beam operates more rigidly. Thanks to this new Marca lifting beam design, the construction becomes sturdier and more stable, allowing the load to be safely lifted in a single operation without lowering and re-lifting. This speeds up the handling process. Marca Beam-Type Lifting Beam (including frame hook suspensions) Adjustable length = 1/2 total length Super-compact design with extremely robust special steel. The hooks of modern crane systems are now manufactured smaller from high-alloy steel, which is why older lifting beams no longer fit. Marca lifting beams are interchangeable and can be adjusted at a later stage.

2M
Lifting Attachments

Marca forklift fork crossbeam

Marca forklift fork crossbeams can be applied to forklifts of all sizes. Standardly manufactured up to 10 tons, crossbeams can also be ordered with higher load capacities upon request. We recommend using a swivel hook on fork crossbeams. • No loss of lifting height thanks to low headroom • Manufactured to your required dimensions • Delivered galvanized upon request • Swivel suspension hook is available as standard. Optional equipment: Ball-bearing swivel hook for rotating under load.

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)
Lifting Attachments

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)

Marca-Drum clamp VFR is highly suitable for stacking upright rimmed drums. The hold-open lever enhances its easy and simple usability.

New double hook
Lifting Attachments

New double hook

Lifting accessories such as round slings or webbing slings must not lie on top of each other on the hook, as there is a risk of damage due to crushing of the lower element. By distributing the lifting accessories across both hooks, damage or a reduction in load capacity is prevented.

Round and flat curbstone clamp
Lifting Attachments

Round and flat curbstone clamp

Manually adjustable or fixed curb clamp for curbstones or similar materials and round parts. A clamping force directly proportional to the load is generated through the high-alloy steel construction, and the load must be resistant to the pressure resulting from this clamping force. The load's center of gravity must be centered. Two clamps must be used for long parts. • Extra large gripping arms providing easy grip • Adjustment is made via latch (on adjustable models) • Simple jaw design (provides a minimum friction coefficient of 0.4 μ) • Secutex impact-protection jaws (jaw opening reduced by 20 mm)