
SpanSet Liftfix HB lifting slings
• Color-coded according to Euro-Norm • Reinforced lifting eye • In accordance with standard EN 1492-1 • Quality controlled
Polyester slings are light, load-friendly lifting elements made from high-tenacity polyester fibre, supplied as flat webbing slings and as endless roundslings.
On painted, machined or delicate surfaces they leave none of the marking a metal sling would. Capacities follow the standard colour code — 1 t violet, 2 t green, 3 t yellow, 4 t grey, 5 t red — and the range conforms to EN 1492-1 and EN 1492-2. Edge protection is mandatory on sharp corners.

• Color-coded according to Euro-Norm • Reinforced lifting eye • In accordance with standard EN 1492-1 • Quality controlled

NEW: NoCut Sleeve and NoCut pad made of high-performance fiber - High-tech cut protection sleeves, see following pages. PowerStar lifting slings are manufactured from robust PES yarns. The woven structure ensures that the polyester sling conforms well to the lifting surface, thereby subjecting the surface to less pressure. A transparent PU coating provides up to 3 times more protection against abrasion. Lifting straps are made even more robust thanks to integrated edge protection: High-tech yarns that provide high abrasion resistance are woven into the outer edges of the straps. The eyes of the lifting sling are subjected to greater wear. The solution: sling eye reinforcement made of high-strength yarn. Thanks to the robust fiber layer of the load-bearing weave, abrasion resistance is increased manifold. Lifting slings are generally attached directly to the load. Another frequently used application is choke hitching, which prevents the load from slipping. D-shaped sling eyes match the width of the sling and therefore significantly reduce wear during choke hitching. The eyes fit the hook optimally. SpanSet quality lifting slings are equipped with a protected, abrasion-resistant label for an optionally integrated RFID chip. This enables electronic identification, management of lifting equipment, and time savings during inspections. For added application safety, the load capacity is stitched onto the webbing on all lifting slings. This ensures that the load capacity remains legible even under heavy soiling. Available with 15 - 40 t lifting capacity upon request. See following pages. Order example: Working length PD.0100.08 10000 kg load capacity, 8m working length. Sling fittings may vary in color from the catalogue.

• Fixed color coding in accordance with European standards • Reinforced sling sleeve • Manufactured in accordance with EN 1492-2 standards • Tested German quality

More compact and robust than ever SupraPlus has been manufactured compactly thanks to the special harmonization of the sleeve and load-bearing core fibers. At the same capacity, the new SupraPlus is up to 25% slimmer than before. The most important advantage: It is not crushed in small crane hooks in a way that reduces working load capacity. Furthermore, this makes it easier to attach to the load and allows for more applications. Two key features make SupraPlus particularly durable: 1. Textile wire woven into the outer sleeve and a special tear-resistant rib profile. 2. First-time use of high-tenacity polyester on the outer surface. This makes the already durable outer sleeve material even more robust. In this way, the new SupraPlus withstands adverse conditions much better. Another advantage of this special weave: Cut resistance is far higher than before. An unalterably coded RFID chip can optionally be applied to these slings. It is integrated into the label to prevent damage or loss. The RFID chip is fully compatible with the IDXpert electronic product management and identification system. You can find more information on the previous pages. If a lifting accessory does not have a label, it must not be used. To prevent this, the label has been incorporated into the round sling sleeve and additionally covered with a transparent protective sleeve. This label is also tear-resistant and robust, ready to be equipped with an RFID transponder and UDXpert. In this way, long-term use and data logging are ensured. To help you select the right sling, the load capacity is prominently woven into the sleeve of the new SupraPlus in addition to the label. Even in cases of extreme soiling, the capacity remains legible. To ensure you always select the right sling, the load capacity is prominently woven into the sleeve of the new SupraPlus—in addition to the label. CE Order example: Enter working length! SP.040.05.0 SupraPlus 4000 kg load capacity, 5 m working length Round slings according to EN 1492-2 Particularly robust and wear-resistant Abrasion-resistant label with fastening strap for IDX Woven load capacity lettering

You have round slings or webbing slings, but cannot lift the load. We solve the problem with Joker hooks. Quite simply, attach the round sling or webbing slings to the Joker hook without any tools. Then attach the sling to the load's attachment point with the Joker hook. Thus, foolproof Joker hooks ensure safe, efficient, and compatible work. Joker hooks are manufactured from extra quality (Grade 8+) forged steel, are very robust, and feature a safety latch likewise made of forged steel. This always ensures a safe suspension method at the attachment point as well. on hand as spares is recommended. Joker hooks provide an ideal match for webbing slings and round slings. Having the load capacity clearly and indelibly marked on Joker polyester sling hooks is a great convenience. This means the yellow hook is attached to the yellow sling, green to green, violet to violet, etc... Until now, special lifting slings were generally required for lifting certain loads. This expensive procurement method can largely be eliminated by using the "Joker". For this reason, keeping a few "Joker" hooks as spares Joining two polyester slings together is also easily achieved with the Joker hook without causing any loss in capacity.

If you have fixed attachment points on your load, you can easily select the correct lifting gear. The round sling easily adapts to all conditions. It is completely safe, especially for expensive machinery, custom-made parts, or products. In SpanSet round slings, textile lifting gear is combined with high-quality forged fittings. The high-strength connecting elements are tested according to prEN 1677 and Grade 8. The round slings are manufactured accordingly. In this way, dangerous load points are eliminated. This combination has a load capacity of up to 30 tonnes. The hooks for round slings are made of high-quality forged steel. The alloy used features a compact structure with a high and optimum throat opening. This makes lifting operations extremely convenient. If parts become damaged, you do not need to replace the entire sling. Thanks to the proven modular system, you can replace each part individually, whether it is the round sling, connecting component, or hook. This saves material and ensures you always work safely. • According to EN 1492-2 • Ideal combination with attachment points • Durable mechanism according to EN 1677

Here, the SpanSet round sling is encased in an additional protective sleeve for a longer service life. The sleeve is tightly stitched in accordance with the EN standard and reduces abrasion. At the same time, it makes handling easier. If large loads are lifted from only one attachment point, they can easily become unbalanced and swing. This is dangerous for personnel around the load and is therefore prohibited. With a 2-leg round sling, you can ensure that the load remains balanced. This gives you better control over load movements. In addition, you benefit from the advantage of a higher lifting factor. With 2-leg slings—when the sling angle is below 45 degrees—you can achieve a capacity increase of up to 1.4 times the nominal working load limit. This allows you to move loads of up to 42 tonnes in a controlled and safe manner. Management becomes even easier with the RFID transponder for the optional IDXpert electronic information system. Order example: Working length L1 E1 LS08.04 2-leg, 8400 kg load capacity, 4m working length. Working length depends on the sling length. Suspension component colors in the catalogue may vary. • According to EN 1492-2 • Ideal combination with attachment points • Heavy-duty hardware according to EN 1677

If you are lifting bulky or valuable loads, you always want to maintain control over the positioning. We recommend 4-leg round slings in SpanSet quality, each manufactured to a precisely defined length to enable symmetrical lifting. Suspension from four attachment points ensures that the load does not tip over either longitudinally or transversely. At a sling angle of up to 45°, it provides a lifting capacity of up to 63 tonnes. The high-strength connecting components are manufactured in Grade 8 quality according to EN 1677. Thanks to the proven modular system, you can replace any part individually, whether it is a connecting link or a hook. This will significantly reduce maintenance costs. Observe a maximum working angle of 60° for round slings. • According to EN 1492-2 • Ideal combination with lifting points • Robust mechanism according to EN 1677

• Magnetic holder for easy fixing, • Protection of the load and lifting gear, • Robustness: Additional reinforcement with perforated sheet, • Easy feeding of lifting accessories, • Perfect dimensional fit when used with SpanSet lifting accessories.

Double-sided secutex coated, secutexPowerSTAR 1000 - 10000= Cut-resistant on both sides S2Power STAR lifting sling! Ordering example: Enter working length!S2.01.00.02 secutex S2 1000 kg DD sling, 2 m working length


Secuwave is a thick and corrugated protective sleeve manufactured for slings. Secuwave increases the bending radius at sharp edges, and the sharp edge does not come into contact with the protective sleeve in any way. Minimum coating thickness 5mm + wave. The wave profile of the protective sleeve provides high flexibility. Secuwave is split at the rear. After the lifting operation is completed, it is removed by pulling it off the sling.

The monofilament protective sleeve provides 70% greater tear resistance. The high-tenacity textile material woven with special yarn resists tearing and at the same time does not add unnecessary thickness to the protective sleeve. **Result:** Longer service life! Please specify the order number, length, and the type of protective sleeves. Abrasion and edge protection - sharp edges are no longer a problem.
SpanSet MagnumPlus offers all the advantages of textile slings: secure grip, optimum handling, and high resistance to wear. These heavy-duty slings feature a lifting capacity of up to 100 tonnes. Among other sling types, this lifting capacity could previously only be achieved with large-diameter wire ropes. Because heavy loads require durable equipment, the outer woven jacket of MagnumPlus is manufactured to be as narrow as possible at the edges. In this way, bunching under high load capacities is minimized, and the textile thread woven into the jacket protects the jacket fabric against abrasion. All lifting accessories in the heavy-duty class are orange. For this reason, the respective load capacity specification is visibly woven into the round sling. The indelible load capacity marking reliably indicates the load capacity even under conditions of extreme soiling. To ensure that even the heaviest loads are not left grounded, MagnumPlus is produced with working lengths of up to 60 metres and load capacities of up to 100 tonnes. Until now, loads in this weight class could only be lifted using heavy chains and wire ropes. The textile sling solution to this: MagnumPlus is exceptionally lightweight. The robust protective jacket (outer) and webbing (inner) are optimally combined in MagnumPlus. Narrow protective ribbing at the sides makes lifting loads in this class possible. In practice, the compact design ensures easier handling and less wear. NEW: NoCut®sleeve and NoCut®pad - High-tech cut protection sleeves, to be found on the following pages. Higher load capacities of 125 tonnes, 150 tonnes, and 200 tonnes are available upon request. Order example: Enter working length! MG.0400.05 MagnumPlus 40,000 kg load capacity, 5 m working length • Round slings in accordance with EN 1492-2 • Load capacity from 10 to 100 tonnes • Tear-resistant label with RFID chip • Extra robust design • Permanently legible, raised woven load capacity specification
Powerflex P2-coated slings are ideal for use on rough and abrasive surfaces. P2-coated slings can be used in combination with C-type choke hooks and D-type rings. Order example: Enter working length! P2.06.DD.05 secutex P2 6000 kg DD-sling, 5 m working length

With VarioWeb, we offer an infinitely variable length adjustment solution for webbing slings. The forged VarioWeb shortening element easily adapts to the ends of the legs. It is extremely easy to use. For length adjustment, simply pull the webbing through its slot. VarioWeb is ideal for lifting asymmetric loads: The shortening mechanism operates directly on the webbing sling. Thanks to its well-conceived mechanics, the length can be adjusted steplessly on each leg. This allows you to achieve the optimum length for any load and ensure balanced force distribution. VarioWeb fittings are manufactured from special forged steel and are therefore extremely robust. All components are engineered so that the straps seat precisely, minimizing edge friction. For greater safety and clear identification, the webbing is color-coded in accordance with EN 1492-1 to indicate load capacity. However, we can also manufacture VarioWeb straps precisely to your specifications and deliver them fully assembled. VarioWeb is flexible not only in application, but also in maintenance. If a VarioWeb strap becomes damaged, you can take advantage of the modular system: Simply replace the damaged component and continue using the rest. • Infinitely adjustable sling • For lifting asymmetric loads • Extra-robust special forged steel • Minimum wear through smart design