+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

41–50 of 211 productsPer page102550100
▦ Grid☰ List
HFG - Single-acting lock nut hydraulic cylinders
Hydraulic Equipment

HFG - Single-acting lock nut hydraulic cylinders

HFG type single-acting lock nut cylinders combine hydraulic lifting power with mechanical load holding safety. HFG cylinders are ideally used in piling and bridge/viaduct support applications where loads need to be held for extended periods. Once the load is hydraulically lifted, the lock nut on the threaded piston is screwed down against the cylinder body, mechanically securing the load. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 50 mm • Single-acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiting device • Special seals • Standard tilting saddles

HFL - Single acting lock nut short type hydraulic cylinders
Hydraulic Equipment

HFL - Single acting lock nut short type hydraulic cylinders

HFL type single acting lock nut short type cylinders combine hydraulic lifting power with the safety of mechanical load support. Ideally, HFL cylinders are used in piling and bridge/viaduct support applications where the load must be held for extended periods. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 45 mm • Single acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiter • Special seals • Standard tilting saddles • Manufactured with optional capacity and stroke upon request.

HFS - Hydraulic flange spreaders
Hydraulic Equipment

HFS - Hydraulic flange spreaders

HFS hydraulic flange spreaders ensure the safe separation of pipe flanges in the marine, oil, and gas industries. 2 models are available from 0 - 4.5 tonnes and 0 - 10 tonnes. Both models enable the user to open/spread flanges up to 92 mm thick. Hi-Force hydraulic flange spreaders can be used individually or in pairs for spreading large flanges. The use of hydraulic equipment prevents problems experienced during alternative methods, such as hammer blows causing sparks, damage to flanges, and similar hazards. • Capacities from 4.5 - 10 tonnes • Working pressure 700 bar • Supplied in a steel carrying case • Complete with manually operated pump and hose • Optional wedges in different sizes • Suitable for stud lengths up to 41 mm

HHP - Hydraulic punch
Hydraulic Equipment

HHP - Hydraulic punch

Hi-Force offers the HHP series hydraulic hole punchers with a choice of two models. Model HHP30 is supplied with a 30-tonne capacity and single-acting cylinder, and model HHP50 with a 50-tonne capacity and double-acting cylinder. Delivered in a dedicated carrying case complete with 4 punches and dies. • Punching capacity up to 50 tonnes • Throat depth 70 mm • Working pressure 700 bar

HHR - Double acting hollow hydraulic cylinders
Hydraulic Equipment

HHR - Double acting hollow hydraulic cylinders

HHR - Double acting (push/pull) hollow cylinders share the same design features as single acting HHS type cylinders, while offering additional capabilities due to their double acting operation. They provide wider application possibilities, especially in long-stroke cylinders, by substantially increasing operating speed and providing an additional pulling (retraction) force. The listed HHR cylinders are standard models and can be manufactured with different capacities and strokes upon request. • Lifting capacity from 33 to 247 tonnes • 700 bar maximum operating pressure • Stroke lengths from 51 to 305 mm • Double acting design providing separate push and pull forces • Overload relief valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston saddles • Threaded cylinder collars

HHS - Single-acting hollow hole, spring return hydraulic cylinders
Hydraulic Equipment

HHS - Single-acting hollow hole, spring return hydraulic cylinders

11 different cylinder models across 5 distinct capacities from 11 tons to 102 tons with a 700 bar working pressure HHS - Single-acting spring return hollow hole cylinders find wide application particularly in various maintenance and repair, pulling, and bolting applications. Thanks to the through-hole design, bolts/studs or cables/wire ropes can be passed through the centre for pulling and tensioning operations, and they are also utilized in pre-tensioning and pressing applications as well as testing various welded or mechanical connections. When equipped with standard piston heads (included in the set), HHS cylinders can also be used comfortably for regular lifting operations. • 11 to 102 ton lifting capacity • 700 bar maximum operating pressure • Stroke lengths from 25 to 152 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special sealing elements • Optional piston heads • Threaded cylinder collars

High pressure couplers and fittings
Hydraulic Equipment

High pressure couplers and fittings

All hydraulic pressure couplers, fittings, valves, and hoses are designed and manufactured for a maximum working pressure of 700 bar. Featuring a 4:1 safety factor, all these accessories have 3/8" - 18 NPT ports, ensuring the safe operation of your hydraulic system. All components are easily interchangeable and mutually compatible. Hi-Force recommends the use of protective dust caps to protect quick connect couplers from dust and dirt.

High-pressure hydraulic hoses
Hydraulic Equipment

High-pressure hydraulic hoses

Hi-Force high quality hydraulic hoses provide a secure connection for hydraulic equipment. Available in black and red colours. Both ends of the hose feature anti-kink handle guards. Using black hoses for advance flow connections and red hoses for return connections prevents potential misconnections. • Working pressure 700 bar • 4:1 safety factor • Custom lengths available to order

HKP - Hole puncher
Hydraulic Equipment

HKP - Hole puncher

HKP hole punchers are supplied as a set including punches and dies in all standard sizes. They include a hand pump and quick-connect coupler. They are used for punching electrical panels and metal plates during field operations. • 10 ton capacity • Spring return hydraulic cylinder • Working pressure 700 bar