+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Hydraulic Equipment

Hydraulic equipment provides powerful, safe and controlled solutions for industrial lifting, pushing, pulling, tightening, dismantling and heavy load handling operations. 2M Makina, in cooperation with specialized manufacturers including Hi-Force, Armanni, JUNG and Hydrobull, offers a comprehensive range of hydraulic cylinders, manual and powered pumps, hydraulic torque wrenches, bolt tensioning systems, pullers, flange spreaders, hydraulic cutters, machinery jacks, heavy-duty transport skates, stackers and mobile workshop cranes.

From industrial maintenance and assembly to machinery installation, precision positioning and factory relocation, selecting the appropriate equipment requires careful consideration of working pressure, load capacity, stroke length, center of gravity and operational safety. Beyond standard equipment supply, 2M Makina provides engineering expertise and technical support for high-tonnage lifting, precision positioning, controlled bolting and specialized heavy load handling applications, helping customers achieve safer and more efficient industrial operations.

87 products

Subcategories

Products in this category

21–30 of 87 productsPer page102550100
▦ Grid☰ List
HEP103 - Two-stage electric hydraulic power unit
Hydraulic Equipment

HEP103 - Two-stage electric hydraulic power unit

Note: For models with an adjustable pressure switch for automatic pressure control, the letters PS must be added to the model number. For models with a pushbutton pendant control, the letters HB must be added to the model number. • Operating pressure 700 bar • Choice of valve types • Compact, lightweight and powerful • Suitable for single and double-acting cylinders • Pump-mounted control lever, pressure gauge and wired remote control

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate
Hydraulic Equipment

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate

HEP 2 Series 2-stage electric hydraulic pump provides a flow rate of 5 to 11 lt/dk at low pressure and 0.65 lt/dk at high pressure. It offers the capability to operate on 110 V, 240 V single-phase and 440 V three-phase voltages. Remote control capability via electric solenoid valves provides high-efficiency operation with single- and double-acting Hi-Force cylinders. Equipped as standard with an external pressure adjustment valve, a 10 and 25 lt oil reservoir, and an oil level dipstick, these pumps can optionally be ordered with accessories such as a pressure gauge set, hydraulic manifold, carrying handle, etc.

HEP3 - Two-stage electric hydraulic power unit-High flow
Hydraulic Equipment

HEP3 - Two-stage electric hydraulic power unit-High flow

HEP 3 Series pumps have the same features as the HEP 2 series, but additionally provide a higher flow rate. (1lt/min high pressure flow rate) HEP 3 Series pumps are ideal for applications requiring speed with higher capacity and longer stroke cylinders or hydraulic equipment. Suitable for continuous operation, these pumps are suitable for outdoor or indoor use with their totally enclosed fan-cooled and quiet operation features.

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate
Hydraulic Equipment

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate

HEP 5 Series pumps deliver the highest flow rate among electric power units. With a low-pressure flow rate of 4 to 17 l/min and a high-pressure flow rate of 2 l/min, these HEP 5 series pumps produce 2.2 kW of power and a maximum pressure of 700 bar. As with all pumps, the transition from low pressure to high pressure occurs at 70 bar.

HFG - Single-acting lock nut hydraulic cylinders
Hydraulic Equipment

HFG - Single-acting lock nut hydraulic cylinders

HFG type single-acting lock nut cylinders combine hydraulic lifting power with mechanical load holding safety. HFG cylinders are ideally used in piling and bridge/viaduct support applications where loads need to be held for extended periods. Once the load is hydraulically lifted, the lock nut on the threaded piston is screwed down against the cylinder body, mechanically securing the load. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 50 mm • Single-acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiting device • Special seals • Standard tilting saddles

HFL - Single acting lock nut short type hydraulic cylinders
Hydraulic Equipment

HFL - Single acting lock nut short type hydraulic cylinders

HFL type single acting lock nut short type cylinders combine hydraulic lifting power with the safety of mechanical load support. Ideally, HFL cylinders are used in piling and bridge/viaduct support applications where the load must be held for extended periods. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 45 mm • Single acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiter • Special seals • Standard tilting saddles • Manufactured with optional capacity and stroke upon request.

HFS - Hydraulic flange spreaders
Hydraulic Equipment

HFS - Hydraulic flange spreaders

HFS hydraulic flange spreaders ensure the safe separation of pipe flanges in the marine, oil, and gas industries. 2 models are available from 0 - 4.5 tonnes and 0 - 10 tonnes. Both models enable the user to open/spread flanges up to 92 mm thick. Hi-Force hydraulic flange spreaders can be used individually or in pairs for spreading large flanges. The use of hydraulic equipment prevents problems experienced during alternative methods, such as hammer blows causing sparks, damage to flanges, and similar hazards. • Capacities from 4.5 - 10 tonnes • Working pressure 700 bar • Supplied in a steel carrying case • Complete with manually operated pump and hose • Optional wedges in different sizes • Suitable for stud lengths up to 41 mm

HHP - Hydraulic punch
Hydraulic Equipment

HHP - Hydraulic punch

Hi-Force offers the HHP series hydraulic hole punchers with a choice of two models. Model HHP30 is supplied with a 30-tonne capacity and single-acting cylinder, and model HHP50 with a 50-tonne capacity and double-acting cylinder. Delivered in a dedicated carrying case complete with 4 punches and dies. • Punching capacity up to 50 tonnes • Throat depth 70 mm • Working pressure 700 bar

HHR - Double acting hollow hydraulic cylinders
Hydraulic Equipment

HHR - Double acting hollow hydraulic cylinders

HHR - Double acting (push/pull) hollow cylinders share the same design features as single acting HHS type cylinders, while offering additional capabilities due to their double acting operation. They provide wider application possibilities, especially in long-stroke cylinders, by substantially increasing operating speed and providing an additional pulling (retraction) force. The listed HHR cylinders are standard models and can be manufactured with different capacities and strokes upon request. • Lifting capacity from 33 to 247 tonnes • 700 bar maximum operating pressure • Stroke lengths from 51 to 305 mm • Double acting design providing separate push and pull forces • Overload relief valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston saddles • Threaded cylinder collars

HHS - Single-acting hollow hole, spring return hydraulic cylinders
Hydraulic Equipment

HHS - Single-acting hollow hole, spring return hydraulic cylinders

11 different cylinder models across 5 distinct capacities from 11 tons to 102 tons with a 700 bar working pressure HHS - Single-acting spring return hollow hole cylinders find wide application particularly in various maintenance and repair, pulling, and bolting applications. Thanks to the through-hole design, bolts/studs or cables/wire ropes can be passed through the centre for pulling and tensioning operations, and they are also utilized in pre-tensioning and pressing applications as well as testing various welded or mechanical connections. When equipped with standard piston heads (included in the set), HHS cylinders can also be used comfortably for regular lifting operations. • 11 to 102 ton lifting capacity • 700 bar maximum operating pressure • Stroke lengths from 25 to 152 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special sealing elements • Optional piston heads • Threaded cylinder collars