+90 212 504 90 00info@2mmakina.com.tr
Get a Quote

Chain Slings and Accessories

Chain slings are built from Grade 80 and Grade 100 chain and work where fabric cannot — high temperature, sharp edges, abrasive environments. They are configured in one, two, three and four-leg assemblies.

Their real advantage is modularity: leg length can be adjusted on site with a shortening claw, and a single worn component can be replaced to return the sling to service. The range conforms to EN 818-4 and every assembly ships with an identification tag stating its working load limit.

50 products
11–20 of 50 productsPer page102550100
▦ Grid☰ List
ICE-120 IRG- ICE Connector
Lifting Slings

ICE-120 IRG- ICE Connector

• Supplied completely pre-assembled with ICE connecting pins and washer on master links, flanges, and similar. • ICE connectors are equipped with a RUD-ID-TAG (RFID chip) as a single piece and can be assigned a distinct identification number.

ICE-120 ISH - ICE-Star hook
Lifting Slings

ICE-120 ISH - ICE-Star hook

• Thanks to its innovative design, it is 25% lighter than Grade 8 hooks of the same load capacity. • Features a wide hook opening, just like the VIP super hooks. • The safety latch is universal across the GHS, SH, Cobra, and ICE-Star hooks of the RUD hook series and can be interchanged (pay attention to the nominal diameter) - easy spare parts procurement. • Developed based on the technology of the VIP-Cobra hook.

ICE-120 IVH - ICE- Shortening hooks
Lifting Slings

ICE-120 IVH - ICE- Shortening hooks

• No reduction in the working load limit of the ICE chain sling when used. • High dynamic strength. • Angled insertion slot prevents the chain from slipping out. • Thickened hook tip prevents improper use (inserting into the center of a chain link like a hook). • Chain groove according to DIN 5692 > 5 x nominal chain diameter. • Supplied pre-assembled with connecting pins and washer.

ICE-120 IW - ICE balancer triangle
Lifting Slings

ICE-120 IW - ICE balancer triangle

Optimum load capacity with equal load distribution Our recommendation: With ICE 2x2-leg slings with balancer triangle, load is equally distributed across all 4 legs, providing 33% higher load capacity compared to standard 4-leg slings. • Upper connection is made with a shackle, lower connection with ICE connecting links. • The special shape at the bottom of the triangle allows easy determination of a 10° inclination angle. • RUD-ID-Point included. • Detailed information on the ICE balancer can be found in the operating instructions. • In 4-leg slings, a maximum of 3 load-bearing legs may be used. Under unfavorable conditions, 2 legs may be used.

ICE-120 IWK-2S / IAK-2S - ICE master link with balancing triangle
Lifting Slings

ICE-120 IWK-2S / IAK-2S - ICE master link with balancing triangle

For use with 2-leg slings • IA link with VKZA • VIP shackle • Balancing triangle • 2 ICE connecting links

ICE-120 Shortenable chain slings — with IVH shortening claw
Lifting Slings

ICE-120 Shortenable chain slings — with IVH shortening claw

ICE chain sling, 1-leg, terminated with ICE Star hook with IVH shortening claw

INOX-Star Stainless steel bolt-on lifting point
Lifting Slings

INOX-Star Stainless steel bolt-on lifting point

• Pentagonal - clear distinction from DIN 580 eye bolt (eyebolt) • Rotatable 360°, adjustable in the direction of pull. • Clear working load limit indication for the non-permissible load range. 4:1 safety factor against breakage. • Hardened ring body • Ring body and bolt material: 14462, duplex steel • 100% crack tested • Bolt is captively mounted • Patented wear marks on the ring body

OLEC Eye-clevis ball bearing swivel
Lifting Slings

OLEC Eye-clevis ball bearing swivel

Omega link (Code: CO), pear-shaped link (Code: MP) or clevis hooks (XLC-GKC-CSC).

Stainless steel chain sling master link 316L (MS-MTS)
Lifting Slings

Stainless steel chain sling master link 316L (MS-MTS)

Welded links feature a flat section to facilitate easier connection with omega links (code COI) for 1-2 leg chain slings (code MS) and 3-4 leg chain slings (MTS).

PowerPoint series Multi-purpose use
Lifting Slings

PowerPoint series Multi-purpose use

• Loadable in all directions with 360° rotation. • Clear marking of nominal load capacity. • 4:1 tested minimum safety factor • Easily rotatable under load with double ball bearings. • Ergonomic and practical design. • Made of CrNiMo steel, specially heat-treated. • 100% crack-tested by X-ray on every part. • Load capacity calculated based on the smallest bolt size. • Threaded studs can be ordered in various lengths. • Fluorescent pink powder-coated components. • Correct and practical use allows costs to be quickly amortized, and safe handling prevents potential damage.