+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

51–100 of 211 productsPer page102550100
▦ Grid☰ List
HLS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HLS - Single acting spring return hydraulic cylinders

At 700 bar operating pressure, cylinders in 6 different capacities and 10 different models from 10 tons to 150 tons HLS - Short Cylinders, the cylinders with the widest field of application worldwide, provide solutions with their spring return design, short closed height, and optimum stroke lengths. Widely used in power plants, shipyards and repair-maintenance workshops, construction and railways, mining and iron-steel industries, as well as oil and gas facilities, HLS type short cylinders offer an economical and portable solution thanks to their compact and powerful construction. • Capacities from 10 to 147 tons • 700 bar maximum operating pressure • Stroke lengths from 25 to 60 mm • Spring return design

HP - Hand Pumps Steel and aluminium body
Hydraulic Equipment

HP - Hand Pumps Steel and aluminium body

All pumps are delivered with the oil tank filled with oil, making the pumps ready for use immediately upon supply. Various pump models are available for use with single- and double-acting cylinders. HP-class pumps are most commonly utilized when completely independent and mobile (portable) pumps are required. hydraulic equipment • Single- and two-speed pumps • 700 bar working pressure • 13 different models, single- and double-acting • Metal construction • Oil capacity from 1 litre to 10 litres • 2-, 3- and 4-way control valve options • Standard pressure relief valve and overload valve • Operation with minimum handle effort • Durable all-steel construction

HPF - Workshop presses
Hydraulic Equipment

HPF - Workshop presses

• Capacities from 10 to 200 tons • 250 mm or 330 mm stroke options • Working pressure 700 bar • Adjustable work table • Pressure gauge • Different configurations available upon request • Manual, pneumatic and electric pump options

HPP - Petrol engine hydraulic power units
Hydraulic Equipment

HPP - Petrol engine hydraulic power units

• 10 l/min flow rate at low pressure (up to 700 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HPR - Pin & bush replacement tool kit

HPR - Pin & bush replacement tool kit

The Hi-Force HPR pin and bush replacement kit range is available with a choice of 37 or 50 tonne capacity, both available with either a manual or air driven hydraulic pump unit. Both the HPR-1 and HPR-2 can also be supplied without a hydraulic pump for users who already have a suitable 700 Bar pump within their tool inventory. All models operate at a maximum working pressure of 700 Bar and incorporate either a standard HHA372 37 tonne capacity or HHA504, 50 tonne capacity lightweight aluminium hydraulic cylinder. Provided by Hi-Force, this product is designed for manufacturers, service centres and users of heavy plant vehicles used in the construction and mining industries. Supplied in a smart metal case for easy portability, all kits include a range of standard tooling, with non-standard and bespoke tooling available upon request. • Safe, simple and hands-free operation • Saves up to 60% time and labour • Flexible and adaptable system • Ideal for on-site and workshop use • Improved safety compared to traditional methods • Suitable for a wide range of pin & bush applications • Multi-purpose aluminium hollow piston cylinder

HPS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HPS - Single acting spring return hydraulic cylinders

Short stroke special profile hydraulic cylinders in 9 different models and 8 capacities at 700 bar working pressure HPS - Pad type short cylinders offer a very practical closed height and stroke combination. These spring return cylinders are ideal for use where minimum closed height and maximum stroke length are critical. HPS type cylinders are especially used in maintenance and repair work, steel construction, weld surface alignment, and flange spreading applications. • Capacities from 4.5 to 147 tons • 700 bar maximum operating pressure • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals

HSP - Electric driven split flow, multi-outlet pumps
Hydraulic Equipment

HSP - Electric driven split flow, multi-outlet pumps

HSP series electric driven split-flow hydraulic pumps are designed to distribute an equal volume of oil from each control valve, regardless of any variation in hydraulic pressure. In this series, various options are offered, ranging from a 2-outlet model with manual directional control valves to an 8-outlet model with electric solenoid valves. Each valve outlet is directly connected to an independent electric-driven internal piston pump. This technology allows each internal piston pump to deliver an equal volume of oil per unit time, irrespective of changes in operating pressure at each control valve outlet. With the HSP split-flow pump, large, unequally weighted loads can be lifted in a synchronized, level, and controlled manner using multiple lifting points. In the electric valve option, each valve is controlled via an electrical control box with on/off switches. Additionally, a synchronized lifting button is provided for each control valve. The maximum working pressure of all HSP pumps is 700 bar, and an adjustable relief valve is located at each outlet for easy pressure control between 70-700 bar. All system components are detailed in the following pages. Optional equipment includes a PLC-controlled synchronized lifting/lowering system capable of setting the target lifting weight, maximum tolerance between lifting points, and other fine adjustments (all controlled by a central touchscreen computer). This system offers a precise solution especially for controlled lowering operations. • Working pressure 700 Bar • Multiple outlet valve options • Precise control for synchronized lifting movement

HSS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HSS - Single acting spring return hydraulic cylinders

HSS - Multi-purpose single acting spring return cylinders find excellent application across maintenance and repair, transport, production, and manufacturing/construction sectors with a wide range of capacities, closed heights, and stroke lengths. All models feature threaded cylinder collars, and the cylinder base and piston rod ends are ready for easy mounting. • Lifting capacity from 4.5 to 109 tonnes • 700 bar maximum working pressure • Stroke lengths from 25 to 457 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals • Optional tilting piston saddles • Threaded cylinder collars

HSWC - Hydraulic wire rope cutters with built-in pump
Hydraulic Equipment

HSWC - Hydraulic wire rope cutters with built-in pump

Easy to transport due to its compact design. In addition to many sectors such as wire rope manufacturing, elevator manufacturing, and construction works, they are also used underwater. 3 models available. • Cutting capacity for wire ropes between 19 mm and 44 mm in diameter • Steel construction • Low-effort operation

HTWP - Torque wrench pumps
Hydraulic Equipment

HTWP - Torque wrench pumps

HTWP Series hydraulic torque wrench pumps are suitable for use with all Hi-Force torque wrench models. Highly practical with a maximum working pressure of 700 bar, an easily adjustable torque relief valve, and air or electric motor options, these torque pumps are supplied as standard with 4-meter torque wrench hoses with quick-connect couplings, a glycerine-filled pressure gauge, and a remote control pendant with a 3-meter cable. Air motor versions feature an internal filter, regulator, lubricator with pressure gauge, and an exhaust-type air cooling system. Note: Pumps with model numbers with an H suffix feature a 60 Hz motor. • 700 bar working pressure and internal overload safety valve • Manual electric or air pump options • Dual-scale glycerine-filled pressure gauge • 3-meter remote control, 4-meter hose set • Protective roll frame and carrying handles • Externally adjustable pressure control (torque relief) valve • Pendant controlled

HVL - Single-acting load return hydraulic cylinders
Hydraulic Equipment

HVL - Single-acting load return hydraulic cylinders

HVL - Low profile ultra-short cylinders provide precise lifting and adjustment in the tightest spaces with their 6 mm stroke. Particularly ideal for use in machinery and machine tool alignment, turbine and other heavy assembly operations. The bases of these load return cylinders must be fully supported during use. • Lifting capacity from 10 to 104 tonnes • 700 bar maximum operating pressure • Single-acting load return design • Wear-resistant piston • Low-friction surfaces • Special seals

Hydraulic machinery jacks
Hydraulic Equipment

Hydraulic machinery jacks

Because the lifting claws have a cradle movement in their sockets, they adapt to the load point in any type of loading, and the risk of jamming and accidents is eliminated thanks to the uniform distribution of force across the surface. • Lifting claws ensure fast lifting and lowering operations; damaged claws can be replaced easily and quickly. • Robust, swivel-out feet prevent the jack from tipping over under load • The rotatable pump operating lever bracket allows the pump lever to be turned to the desired position, enabling the jack to be used even in the most confined spaces. • With the adjustable precision release valve, lowering of the lifted load is ensured with sensitive and millimeter precision. • Safety valve protects the jack from overload. • Continuous and synchronized operation is possible when coupled with electro-hydraulic central systems. • The lifting capacity is maximum relative to the jack's extremely low tare weight.

IB - Imperial hexagon reducer bushings
Hydraulic Equipment

IB - Imperial hexagon reducer bushings

Hi-Force hexagon metric bushings are used as an easy and economical method to reduce the size of TWH-NRH cassette heads. The relevant model is determined from the table by selecting the outer AF (across flats) size and the inner AF size. When a reducer bushing is used, the wall thickness (indicated by the letter W in the table) must be added to the cassette minimum diameter value.

ICE-CURT ratchet tensioner with clevis head
Load Securing

ICE-CURT ratchet tensioner with clevis head

Prior to maintenance: Production of the VIP model chain tensioner is being discontinued! However, it is possible to mount the ICE-Curt model to VIP chains in compliance with the relevant specifications. • Exceeds EN 12195-3 standards • Equipped with theft protection device using a padlock (type ABUS 85/40HB) • Equipped with RUD-ID-Point • Easy to clean and lubricate • Features a new, practical and easy-to-use release safety catch • Easy to operate even with gloves • Extremely lightweight and robust thanks to innovative design.

Industrial garage cranes
Crane Technology

Industrial garage cranes

Load capacity up to 3000kg Workshop-type floor cranes are equipment developed for daily or precision applications, offering practical and economical lifting solutions with wide use across the industrial and manufacturing sectors. These cranes can be delivered fixed-mounted or disassembled upon request. When disassembled, the crane can be folded over the chassis. Even in the folded position, the crane can be easily moved via the trolley handle. This feature allows the crane to pass through low-clearance areas (such as 0.5 m) and ensures it takes up minimal space during use. The crane lifting arm features 7 adjustment positions. The crane can be operated at 4 different speeds and can be held in the desired position under load. With 180° mobility, the crane provides precise maneuvering via a control handle equipped with a brake system. Fully complies with CE European occupational safety standards.

IP10 Vertical lifting technique
Lifting Attachments

IP10 Vertical lifting technique

The IP10 vertical lifting clamp with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Horizontal pulling load is possible up to an inclination of 15°. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. for surface hardness up to 27 Rc (900 N/mm²), and 10% of the W.L.L. for surface hardness up to 37 Rc (1170 N/mm²).

IP10/S Vertical lifting and transfer of plates
Lifting Attachments

IP10/S Vertical lifting and transfer of plates

For lifting and turning of stainless steel plates The IP10/S and IPU10/S lifting clamps are suitable for lifting, turning (180°) and vertical transfer of stainless steel plates, profiles and fabrications. These lifting clamps feature a stainless steel jaw and pivot to prevent contact corrosion. 1. IPU10/S: With a universal hinged lifting eye moving in all directions, it allows the user to lift and place the load from any direction. 2. IP10/S: Features a fixed lifting eye. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPBC Horizontal lifting clamps with pretension
Lifting Attachments

IPBC Horizontal lifting clamps with pretension

The IPBC pre-tension safety lifting clamp is suitable for lifting plates and steel beams. It can also be used for turning steel beams (from the H-position to the I-position) and on corrugated plates. This lifting clamp exerts a pre-tension on the material being lifted, such that the clamp remains in an upright position on the plate when the load is lifted or when unloaded. IPBC clamps can be used up to a maximum angle of 60°. They can be used individually or in pairs.

IPBTOZ Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBTOZ Shipbuilding clamp for Holland profiles

The IPBTOZ safety lifting clamp is suitable for use as a temporary tackle eye in spaces reinforced with HP (Holland) profiles, such as engine rooms and ship sections. The IPBTOZ lifting clamp is fitted with a threaded spindle for mounting the clamp. It locks automatically as soon as a load is applied. Clamps with higher WLL and different jaw openings (HP profiles) can be manufactured upon request.

IPBU(U)Z Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBU(U)Z Shipbuilding clamp for Holland profiles

The IPBU(U)Z safety lifting clamp is suitable for vertically lifting, transporting and placing Holland profiles onto ship hull sections. The IPBU(U)Z lifting clamp features a locking device ensuring complete safety in both open and closed positions. Used only for Holland profiles (not to be used for standard plates). Available in two versions: 1. IPBUUZ type: With articulated lifting eye. 2. IPBUZ type: With fixed lifting eye. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. up to a surface hardness of 27 Rc (900 N/mm²), and not less than 10% of the W.L.L. up to a surface hardness of 37 Rc (1170 N/mm²).

IPH10 High lifting capacity - Low weight
Lifting Attachments

IPH10 High lifting capacity - Low weight

IPH10 horizontal safety lifting clamps are suitable for lifting and transporting non-sagging and non-deflecting plates in a horizontal position. Lightweight clamp + spring loaded. IPH10 lifting clamps can also be used suspended vertically under a spreader beam. Lateral loading max. 15°. From 2 tons, equipped with magnet and carrying handle. Clamps with higher capacities and different jaw openings can be produced upon request. Ask us for higher load capacities and different jaw openings!

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock
Lifting Attachments

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock

IPHGUZ horizontal safety lifting clamps are suitable for lifting and transferring steel beams and plates. The IPHGUZ lifting clamp is equipped with a locking device for both open and closed positions that ensures complete safety. These clamps are suitable for use on rolling machines, shears, and press brakes. Available in two versions: 1. IPHGZ: Features a fixed lifting eye. 2. IPHGUZ: Features an articulated lifting eye. Clamps with higher WLL and different jaw openings are available upon request. Please refer to the illustration showing lifting angles for correct usage.

IPHNM10 Horizontal transport of plates
Lifting Attachments

IPHNM10 Horizontal transport of plates

IPHNM10 safety lifting clamps (NM stands for non-marring) can be used in all industries where the material must not be damaged while being lifted and transported. To securely grip delicate plates and transport them horizontally, the jaws of the lifting clamp are made of a synthetic material with a high coefficient of friction. This also applies to smooth-surfaced materials, composite materials, and coated plates, or plates with very hard (impenetrable) surfaces.

IPHOZ Horizontal lifting and transport of plates
Lifting Attachments

IPHOZ Horizontal lifting and transport of plates

IPHOZ horizontal safety lifting clamps are suitable for lifting and transporting sagging or bending plates in the horizontal position. Very lightweight design. The maximum vertical lifting angle with IPHOZ clamps is 60°. IPHOZ lifting clamps can also be used with long chains and two-leg slings.

IPSC Compact system for clamping and pulling
Lifting Attachments

IPSC Compact system for clamping and pulling

The IPSC positioning and pulling clamp is suitable for positioning and turning steel plates and sections. It is specially designed for use as a positioning and pulling clamp. Cannot be used as a lifting clamp! Suitable for steel with a surface hardness up to 30 Rc. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPSTARTEC11 Beam clamp
Lifting Attachments

IPSTARTEC11 Beam clamp

The IP - Startec is a clamp specially designed for lifting, turning, and stacking H and I profiles. Thanks to its special construction, the lifting clamp not only performs load lifting, but also enables the stacking and turning of the load. Depending on the size and weight of the beam, 2 separate IP - Startec clamps are offered with different jaw openings.

IPU10 For gripping in all directions and universal lifting
Lifting Attachments

IPU10 For gripping in all directions and universal lifting

Can be loaded from all directions during lifting, turning and transport The universal vertical lifting clamp IPU10 with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Ask for other jaw types and higher load capacities! • Pulling and lifting load can be applied from all directions up to 90° • Maximum safety ensured by a single safety latch • Type DVA can also be delivered • Test certificate, detailed operating instructions, and CE certificate are supplied with delivery.

IPU10A Automatic clamping universal plate clamp
Lifting Attachments

IPU10A Automatic clamping universal plate clamp

The IPU10A plate clamp engages automatically the moment it is placed onto the material. As long as the safety lock remains in the engaged position, it protects against hazardous situations. It is your greatest asset when manual locking is difficult. Please contact us for different load capacities and jaw openings.

IS - Imperial sockets
Hydraulic Equipment

IS - Imperial sockets

hydraulic equipment Hi-Force high-quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 47 different nut size models available with square drives ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives in sizes from 3/4" to 2 1/2" • Up to 6 7/8" socket size • Retaining pin and safety O-ring

JAH - Aluminium body super jacks
Hydraulic Equipment

JAH - Aluminium body super jacks

These JAH and JAS series lightweight aluminium alloy jacks offer an extremely practical and portable solution with a wide range of capacities and lifting heights. Screwed or plain rams and claw lifting options make these jacks indispensable in maintenance, manufacturing, construction, and heavy-duty plant applications. • Capacities between 20 and 60 tonnes • Stroke lengths between 152 and 305 mm • Overload protection valve • Head or claw lifting functions • Manufactured from aluminium alloy (load-bearing parts made of high-grade steel) • Used in maintenance, manufacturing, construction, and heavy-duty applications

JCS & JCH - Steel compact space-saving jacks
Hydraulic Equipment

JCS & JCH - Steel compact space-saving jacks

Hi-Force JCS series compact jacks are ideal particularly for lifting and positioning operations in confined spaces. They are lightweight, easy to operate, available in steel and aluminium options, all models feature a spring-assisted return, and the piston is hard chrome plated. The pumping mechanism rotates through 360°, allowing versatile operation. The 240mm long detachable operating handle provides ease of use thanks to its compact size. Although sharing the same features and shape as the JCS model compact jacks, it provides versatility across applications thanks to its hollow piston. It is preferred for tooling, maintenance and repair work, and tensioning. Where pulling force is required, pulling can be applied by passing a threaded rod or wire rope through the hollow piston. Multi-purpose JCH compact jacks can also be easily used for lifting operations just like the JCS. • Capacities from 10 tonnes to 30 tonnes • Usable in any position • Lightweight and compact • Spring return piston • Multi-position pumping mechanism • Overload protection valve • Wear-resistant plated piston rod • Sealed hydraulic system • Aluminium and steel options • Capacities from 13 tonnes to 21 tonnes • Usable in any position • Lightweight and compact

JSS - Steel bottle jacks
Hydraulic Equipment

JSS - Steel bottle jacks

Hi-Force JSS series bottle jacks are available in capacities from 3 tonnes to 100 tonnes with stroke lengths ranging from 135 mm to 195 mm. Models up to 16 tonnes feature a screw extension to bridge the gap between the piston and the load. All models include a safety valve and have a tubular pump handle. • Capacities from 3 to 100 tonnes • Robust steel construction • For industrial and automotive applications

KRATOS FLY'IN 3 FULL BODY HARNESS
Personnel Safety

KRATOS FLY'IN 3 FULL BODY HARNESS

FA1020200 FLY'IN 3 KRATOS FULL BODY HARNESS

Large impact wrench
Hydraulic Equipment

Large impact wrench

• Heavy vehicle tire service • Construction machinery maintenance and assembly • U-bolt applications for heavy vehicles

Lifting beams with suspension hooks
Lifting Attachments

Lifting beams with suspension hooks

Combinable, adjustable beam-type and H-frame lifting beams A lifting beam can be used for many years in a wide variety of tasks. A lifting beam that is suitable today may perhaps become too large for a new crane system in the future. The Marca lifting beam is fully equipped for this and is always adaptable to modifications. Unsafe and time-consuming modifications are no longer necessary. lifting attachments Guide notches are cut into the steel profile flange faces. With integrated guidance, displacement of the hook plate is prevented and the lifting beam operates more rigidly. Thanks to this new Marca lifting beam design, the construction becomes sturdier and more stable, allowing the load to be safely lifted in a single operation without lowering and re-lifting. This speeds up the handling process. Marca Beam-Type Lifting Beam (including frame hook suspensions) Adjustable length = 1/2 total length Super-compact design with extremely robust special steel. The hooks of modern crane systems are now manufactured smaller from high-alloy steel, which is why older lifting beams no longer fit. Marca lifting beams are interchangeable and can be adjusted at a later stage.

Magnetic claws used on cranes
Lifting Attachments

Magnetic claws used on cranes

The magnetic claw is suitable for vertical or horizontal lifting. Lifted sheet metals can be turned from a vertical to a horizontal position or vice versa. Only 1 magnet is required for sheet dimensions of 1000x2000 mm, and 2 lifting magnets with a small spreader beam are required for 1500x3000 mm sheets. **With double safety when used on cranes ***3-fold safety when used on cranes. Safely used on ground St37k steel up to a thickness of 25 mm. Please note! Full holding force is only achieved on materials with smooth, flat, clean surfaces, good magnetizability, and sufficient thickness. On rusted and scaled materials, the holding force is 2/3 for magnetic claws and 50% for load lifting magnets.

Manibox VS Worm gear winches
Manual Lifting Equipment

Manibox VS Worm gear winches

Manibox VS in capacities from 250kg to 3000kg If you need different console type winches, (e.g. stainless steel) call 2M. • Used for lifting and pulling. • Floor or wall mounted. • Industry • Theatre (stage-scenery) • Water treatment & retention facilities • Barges and trailers • Suspension applications • High safety is ensured with worm gear and automatic brake system. • Gear wheel spring is stainless steel. • Mechanical parts are machined parts and treated with cataphoresis coating. • Mechanical parts are inside a metal casing. • Using the release lock (except VS 250), the rope can be quickly unwound from the drum. Must not be applied under load. • Features a crank handle adjustment knob.

Manifolds
Hydraulic Equipment

Manifolds

Hi-Force manifolds are specially designed to distribute hydraulic flow as required. Both open-type manifolds and valve-controlled (shut-off/throttling) type manifolds are available. All valve outlets are 3/8". There are 9 different manifold models available with up to 8 outlets. Compatible with single-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, with all components mounted on the unit. Compatible with double-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, and includes 4 open manifolds for return flow. All components are mounted on the unit. • Working pressure 700 bar • Open or valve-type manifold options • Models with 2, 4, 5, 6, or 8 outlets

2M
Lifting Attachments

Marca forklift fork crossbeam

Marca forklift fork crossbeams can be applied to forklifts of all sizes. Standardly manufactured up to 10 tons, crossbeams can also be ordered with higher load capacities upon request. We recommend using a swivel hook on fork crossbeams. • No loss of lifting height thanks to low headroom • Manufactured to your required dimensions • Delivered galvanized upon request • Swivel suspension hook is available as standard. Optional equipment: Ball-bearing swivel hook for rotating under load.

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)
Lifting Attachments

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)

Marca-Drum clamp VFR is highly suitable for stacking upright rimmed drums. The hold-open lever enhances its easy and simple usability.

Marca-Plate lifting clamp: TLH - TLR
Lifting Attachments

Marca-Plate lifting clamp: TLH - TLR

Marca-TLH type plate lifting clamp helps you horizontally transport single or multiple plates up to 150 mm thickness and a capacity of up to 5 tons/pc. TLR type clamps allow you to transport plates or bundles up to 300 mm thickness.

MB - Metric hexagon reducer bushings
Hydraulic Equipment

MB - Metric hexagon reducer bushings

Hi-Force metric hexagon bushings are used as an easy and economical method to reduce the size of TWH-NRH cassette heads. The relevant model is determined from the table by selecting the external AF (across flats) size and internal AF size. When using a reducer bushing, the wall thickness (indicated by the letter W in the table) must be added to the cassette's minimum diameter value.

Mechanical chain hoists
Manual Lifting Equipment

Mechanical chain hoists

Superior technology in Tralift® mechanical chain hoists, manual lifting from 250kg to 20 tons Extremely safe, lightweight, compact and economical, Tralift® hoists are equipped with maintenance-free 360° swiveling forged steel hooks with safety latches, custom-manufactured high-strength GRADE 80 RUD/Germany hoist chains compliant with DIN 5684, a special braking system, and load limiters. Tralift® is delivered with a CE European occupational safety certificate and test report. Tralift® hoist chains are stocked in continuous lengths, and genuine RUD/Germany chains are fitted to the required length by our technicians. • Extended load and hand chains for higher suspension heights • Hoists with load limiter

2M
Hydraulic Equipment

Medium Size Impact Wrenches

• 1/4"(6.35mm) HEX.DR./3/8" (9.5mm) SQ.DR. • Loosening nuts, bolts, drive screws and screws under 8mm in light-duty work • Assembly and disassembly of small engines • Disassembly and fastening for fenders, bumpers and interior parts

MFS - Mechanical flange spreaders
Hydraulic Equipment

MFS - Mechanical flange spreaders

MFS series mechanical flange spreaders are available in 6 different models. • Suitable for bolt diameters up to 31 mm • Maximum opening 231 mm • Requires no external power source

MHP - Manual hydrotest pump
Hydraulic Equipment

MHP - Manual hydrotest pump

Hi-Force MHP series 2-speed manual hydraulic pumps can be used with a wide variety of fluids, including water. Manufactured from aluminium alloy, they are extremely lightweight and offer versatile use. Featuring a semi-automatic stage changeover and 2-stage piston design, they provide a high flow rate up to 20 bar pressure. Available in 5 different models with working pressures from 100 bar up to 1000 bar, they are supplied with a 610 mm long pump handle. Primary areas of application include pipelines, pressure vessels, pressure valve applications, and all similar pressurised applications. • Working pressure up to 1000 bar • Suitable for use with various fluid types • Flow rate adjusted according to pressure via semi-automatic stage changeover • Stainless steel pistons and lightweight aluminium pump construction • Needle-type pressure release valve for precise pressure control • Economical, replaceable valve seats • 15-litre fluid reservoir as standard • Optional pressure gauges available

MS - Metric Sockets
Hydraulic Equipment

MS - Metric Sockets

Hi-Force's high quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 53 models in different nut sizes with square drive sizes ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives from 3/4" to 2 1/2" • Up to 145 mm socket size • Fixing pin and retaining O-ring

New double hook
Lifting Attachments

New double hook

Lifting accessories such as round slings or webbing slings must not lie on top of each other on the hook, as there is a risk of damage due to crushing of the lower element. By distributing the lifting accessories across both hooks, damage or a reduction in load capacity is prevented.

New generation pneumatic wheel nut torquing - Kuken PTS-1000E/800E
Hydraulic Equipment

New generation pneumatic wheel nut torquing - Kuken PTS-1000E/800E

Suitable for JIS and ISO systems. (Reaction absorber is optional for ISO systems) • Low vibration and low noise level • Tightening torque control system enhanced with built-in electronic control • Automatic shut-off upon reaching the set torque • Automatic detection of tightening and loosening • High torque applicable when required for loosening operations • One-touch two-handed operation • Battery pack (AA battery x 6), no external power supply required. • 2-step start switch for safety • Ultra-bright white LED light for working even in dark areas • Bus or truck wheel nut tightening and loosening • For nut and bolt torquing, assembly and disassembly in various structures