+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Hooks and Safety Latches

Hooks ship with declarations of conformity as standard, and can be delivered with third-party test-house reports. Several of our special hook models carry embossed symbols on the body so deformation and correct lifting angles can be read at a glance.

View Products→

Subcategories

All Products

1–50 of 211 productsPer page102550100
▦ Grid☰ List
1 ton Spannfix - Ratchet lashing strap
Load Securing

1 ton Spannfix - Ratchet lashing strap

• Yellow chrome-plated tensioning mechanism • Non-slip webbing • Quality controlled

1-ton lashing strap
Load Securing

1-ton lashing strap

With SpanSet refining numerous details, this 1-ton lashing offers unparalleled robustness and durability in its class. Key innovations: High tensioning force, a wider and longer tensioning handle for easy tensioning. Working with SpanSet makes work effortless. The 1-ton lashing strap is specially woven and has a smooth surface. This prevents snagging and fraying. Info Both lashings are suitable for use even under the toughest conditions. Superior coating technology guarantees a long service life.

2M
Load Securing

10-tonne ABS stops heavy loads with double the power

Heat, cold, moisture and salt water, impact and misuse, harsh conditions: SpanSet quality ABS ratchet will not let you down even under the harshest conditions. Safety and ease of use are an added bonus. During the tensioning process, the final tooth previously depended on arm force. Thanks to the patented double-layer drive gear, the tensioning process provides greater safety and convenience in practical half steps. This delivers higher pretensioning force and more practical operation through smaller increments. Standard ratchets release the strap in a single motion. During release, if the load is not stable, it can tilt dangerously. The ABS tensioning system releases the pretension force in small steps, allowing you to take precautions against the risk of the load toppling over. Ideal for operators of any physical strength. Requiring less effort, this lighter and easy-to-use 10-tonne ratchet provides greater safety and power with less exertion. New: When choosing, opt for the EPIS system featuring RFID technology. Lashing straps must be inspected at least once a year by qualified personnel. Please contact 2M Makina.

250 kg - Buckle 25 mm
Load Securing

250 kg - Buckle 25 mm

• Non-slip webbing • Quality controlled

5 ton Spannfix - Lashing strap
Load Securing

5 ton Spannfix - Lashing strap

• Achieve the required safety tension effortlessly. • Low cost • Less tensioning force • Back protection • Easy and comfortable handling • Durable construction

500 kg - Buckle 25 mm
Load Securing

500 kg - Buckle 25 mm

• Non-slip webbing • Quality controlled

750 kg - Ratchet 35 mm
Load Securing

750 kg - Ratchet 35 mm

• Non-slip webbing • Quality controlled

ABS 4-ton ratchet lashing
Load Securing

ABS 4-ton ratchet lashing

Effectively coated against abrasion, thermal fine fibre, interwoven tubular webbing and an elongation of under 4% – this is the anti-blocking ABS lashing strap. Now even better with new, wear-resistant high-tech yarns. The result: Greater safety for a long service life! We offer two different options; consult us for the appropriate use, whether applying pull or push tension.

ABS 5-tonne tensioner
Load Securing

ABS 5-tonne tensioner

Standard ratchets release the strap in a single motion. During release, if the load is not stable, it can dangerously tip over. The ABS tensioning system releases the pretension force in small steps, allowing you to take precautions against the risk of the load toppling over. During the tensioning process, the final tooth previously depended on arm force. Thanks to the patented double-tier drive gear, tensioning provides greater safety and convenience with practical half-steps. This achieves greater pretensioning force and more practical operation through small steps. Heat, cold, moisture and salt water, impact and rough use, harsh conditions: The SpanSet quality ABS tensioner will not let you down even under the harshest conditions. Safety and ease of use to boot. Equipped with a PVC label protector to further extend label life. A shortened label length, the use of stronger material, and an additional PVC sleeve encasing the entire label are among the features of the new label. You Can Easily Measure the Tensioning Force. With the new TFI (Tension Force Indicator), it is possible to measure and adjust the applied tensioning force, and TFI sizes with capacities of 250, 500 and 750 daN are available. Order your tensioner with TFI and increase safety.

ACP - Self-centering hydraulic pullers
Hydraulic Equipment

ACP - Self-centering hydraulic pullers

ACP heavy-duty self-centering hydraulic pullers are available in 4 different models. The 3 legs are interconnected by a mechanism that allows them to self-center automatically. Pullers with capacities between 10 and 50 tonnes are 3-legged, and both 2-leg and 3-leg models of the 10-tonne puller are available. All models include a detachable hollow piston, manual pump, hydraulic hose, and a 100 mm diameter pressure gauge. All models are designed for pushing, pulling, mounting, and dismounting press-fitted or heat-fitted parts such as gears, bearings, sleeves, gear wheels, internal bearings, wheels, sprockets, flywheels, etc. • Working capacity between 10 and 50 tonnes • Quick setup, easy to use • Manufactured with legs made of high-quality hot-forged steel.

AHP - Air-driven hydrotest pumps - Standard flow
Hydraulic Equipment

AHP - Air-driven hydrotest pumps - Standard flow

• Output pressure ranging from 6 to 2931 bar • Suitable for use with various fluids • 150 mm diameter dual-scale pressure gauge • Air consumption 0.79 m³/min • Variable output flow rate • Maximum weight 23 kg • Includes air inlet filter, pressure regulator, and lightweight oil tank • 8 different models available with pressure capacities ranging from 6 bar to 2931 bar • Optional stainless steel tank produced • Optional IP65-rated piston-mounted microswitch stroke counter available

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow
Hydraulic Equipment

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow

Hi-Force AHP-CR series air driven hydrostatic pressure test pumps are offered to users in 8 models with different capacities ranging from 6 bar (87 PSI) up to 2931 bar (42500 PSI). Fitted as standard on all pumps is a chart recorder capable of recording values on a single chart for up to 4 hours. All models are suitable for operation with various fluids including water, and feature a glycerine-filled pressure gauge, air inlet filter, lubricator and pressure regulator unit, plastic fluid reservoir, pump start/stop valve, and a reinforced stainless steel skid frame. A recorder by-pass valve and pressure release valve are fitted on the pump as standard. Optionally, a stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorders with different clock speeds can be supplied. All units have a maximum weight of 31kg. • Output pressure up to 2931 Bar • Suitable for use with various fluids • 150mm dual scale anti-vibration pressure gauge • Air consumption 28 scmf (0.79 m/min) • Infinitely variable output pressure and flow • 7 litre capacity • Supplied with 50 recording charts, 1 chart pen, with additional charts and pens available.

AHP11 - Single-Stage Air Hydraulic Pump
Hydraulic Equipment

AHP11 - Single-Stage Air Hydraulic Pump

Working pressure is 700 bar, operating with 7 bar air pressure. The compact, lightweight and powerful AHP11 single-stage air-driven hydraulic power unit is an economical and mobile (portable) alternative to manual pumps. The pump pedal is suitable for both foot and hand operation. All pumps are delivered with the oil reservoir pre-filled with oil, ensuring the pumps are ready for use immediately upon supply. • 2-way and 4-way control valve options • Internal overload safety relief valve • Oil reservoir level indicator • Standard oil reservoir capacity up to 10 litres

AHP2 - Air driven hydrotest pumps - High flow
Hydraulic Equipment

AHP2 - Air driven hydrotest pumps - High flow

AHP2 series air driven hydrostatic pressure test pumps offer 5 different model options with output pressure capacities ranging from 17 Bar (246 PSI) to 1634 Bar (23700 PSI). All models feature a compact design and operate compatibly with various fluids, while incorporating a 150mm diameter glycerine filled pressure gauge, air filter, lubricator and pressure regulator, lightweight fluid reservoir, pump on/off valve, and a reinforced stainless steel protective cage. Optional stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorder with various clock speeds can be supplied. • Output pressure ranging from 17.2 to 1634.1 bar • Suitable for use with various fluids • 150 mm diameter dual scale pressure gauge • Air consumption 1.59 m³/min • Variable output pressure and flow rate • Air inlet filter, pressure regulator, lightweight oil tank standard • Optional stainless steel tank available • Optional IP65 class piston-mounted microswitch stroke counter available

ATDP - Air-driven double-acting twin hydrotest pumps
Hydraulic Equipment

ATDP - Air-driven double-acting twin hydrotest pumps

Air-driven twin double-acting ATDP series hydrotest pumps are available in 3 different models with capacities ranging from 87 bar to 1489 bar. Thanks to the twin double-acting design, the fluid volume delivered per stroke is significantly higher compared to the AHP and AHP2 series. All models feature a 150mm diameter glycerine-filled pressure gauge, air inlet filter, regulator, lubricator unit, and pump on/off valve. If the pump is to be used with special fluids or chemicals, it can be manufactured with Viton and ethylene propylene seals upon order. Seals made of different materials can be manufactured upon request. • Output pressure ranging from 87 to 1489 bar • Suitable for use with various fluids • Twin double-acting design allows high-volume flow • Air consumption: 6m³/min • Can be used with various fluids, including water • 150mm diameter dual scale pressure gauge • Variable output pressure and flow • Air inlet filter, regulator and lubricator • Optional stainless steel reservoir available, IP65 rated piston-mounted microswitch stroke counter available • Weather-resistant paint finish, pressure isolation valve

BC - Battery-powered cable lug crimping tools
Hydraulic Equipment

BC - Battery-powered cable lug crimping tools

The battery-operated lug crimping tools in the BC range include 4 models, offering either a “C” shaped jaw or a parallel guide design with a 360-degree rotating head. While providing all the versatility of the manually operated CH and SC range, this product range increases speed and offers ease of use due to battery operation. All models are supplied with a battery charger, shoulder strap, and tool storage case. In addition to the standard die sets supplied with each crimping tool as indicated, optional die sets are also available as shown in the table below. • Supplied with a standard die set • Battery status • Efficient and fast battery charging

BRAVO
Manual Lifting Equipment

BRAVO

The Tractel lever chain hoist has proven its quality and durability through simple and safe operation. Along with its low weight and ergonomic housing, its maintenance-free use is extremely easy. The chain is released by turning the hand wheel or by pulling the unloaded chain. Under load, the pressure brake prevents unintentional lowering of the load. Special requests can be made for longer chain lengths. Call 2M. • Simple and safe operation • Free-chaining position • Standard series production with 1.5 m round link chain • Smooth operation with steel bearings • Thanks to the free-chaining handwheel, the load hook can be pulled into the desired position with a single hand movement while the directional lever is in neutral • The load is held safely during position changes of the directional lever • Easily portable anywhere thanks to its lightweight and compact design • Special forged steel swivel suspension and load hooks with safety latches, tested for 10,000 open/close cycles • Maximum load is lifted with minimum lever effort; superior mechanical efficiency • Load chain is premium-quality German RUD brand.

BUX - BM and BMP series battery-powered lifting magnets
Lifting Attachments

BUX - BM and BMP series battery-powered lifting magnets

• Built-in 12V battery provides at least 8 hours of continuous operation • Handheld infrared remote control operates the magnet from up to 5 m away • Special sensor prevents power cut-off during lifting • Release is performed by pressing two buttons to prevent accidents • Visual and audible low battery warning • If the battery level is too low, the magnet cannot be switched on • Opening cover allows easy access to the battery and control panel • Additional lift and release buttons located on the magnet • LED indicator showing battery charge level and thermal automatic circuit breaker

BW - Backup wrench
Hydraulic Equipment

BW - Backup wrench

BW series backup wrenches prevent the bolt being tightened from rotating and provide easy tightening and removal using a lever to prevent nut kickback. Once clamped, the T-Bar design adjustable reaction point remains locked until the operation is completed. • Suitable for use with TWS-N and TWH-N torque wrenches • Interchangeable hexagon links • Positive release mechanism

CH - Cable crimping tool
Hydraulic Equipment

CH - Cable crimping tool

CH series cable lug crimping tools feature C-jaw and parallel guide type options. Models with a 180° rotating head facilitate working in confined spaces. Pump units include the HP227FPC foot-operated pump set. This set also includes an elbow fitting, pressure gauge and block, and a 3-metre hydraulic hose with male coupler. All models except CH1000 include HP227FC, MB1 metal case, the selected crimping tool and its dies. In addition to the standard die sets supplied with each cable crimping tool as specified, optional die sets are also available as shown in the table below. • CH80 and CH63 models are suitable for crimping connectors up to 630 mm² cross-section • CH30, CH32 and CH40 CH-Cable crimping tools are suitable for crimping uninsulated terminals up to 400 mm² cross-section • CH1000 is suitable for crimping transmission and distribution lines up to 1000mm² cross-section • 7 different model options • Die set included with the product • CH21 model is suitable for crimping uninsulated terminals with 240 mm² cross-section • Working pressure 700 bar • Each includes a quick-connect coupler • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces

Control/Directional valves
Hydraulic Equipment

Control/Directional valves

PMV type flow control valves are mounted on the pump. RMV type flow control valves can be mounted remotely from the pump. • Working pressure 700 bar • Can be mounted on the pump or at a different location • Manual and solenoid types are available

CT - Hydraulic cutters with integral pump
Hydraulic Equipment

CT - Hydraulic cutters with integral pump

2 models are available capable of cutting 25mm diameter wire rope and 40mm diameter cable. Used for cutting wire rope, metal bar, wire strands and cable. • Cutting capacity up to 40mm • Capable of cutting a wide range of materials • Self-contained hydraulic design

Digital pressure gauges
Hydraulic Equipment

Digital pressure gauges

Driven by the demand for digital gauges, Hi-Force has added the HDG1 and HDD1 digital gauges to its product range, as well as the HPT1 pressure transducer featuring the HDD1 gauge. Offering users higher accuracy (0.5% terminal point accuracy), these models represent a significant advancement compared to dial gauges with 1% accuracy. HPT1 pressure transducers also provide users with the option of remote pressure reading, which is preferred in certain applications. • Pressure measurement capability up to 1.000 Bar (14.503 PSI) • Readout in Bar, PSI, mPa, kg/cm³ units as well as other user-defined measuring units via the programmable unit • Compatible with a wide variety of fluids thanks to laser-welded stainless steel sensor and socket • Tare function, minimum and maximum memory, blue backlit display, rubber protective boot and IP67 waterproof enclosure • Minimum 2.000 hours battery life

DYNAFOR® Remote-controlled digital crane scale - LLXh
Crane Technology

DYNAFOR® Remote-controlled digital crane scale - LLXh

The LLXh, the new remote-controlled model of the Dynafor LLX series, is a load scale that delivers precision measurements, can be fitted to various crane hooks, and safely transported to any working site with its carrying case. Operating time from 300 hours to 1000 hours (varies depending on application) • Capacity from 15 tonnes to 250 tonnes • Display operated via wireless communication up to 80 metres in open space • 2.4 GHz international radio frequency compliance • Interchangeable display • Combination with various sensors and displays • Resistant to sudden shocks and weather conditions • CEM certification • Optional connection capability (PC/dynafor LLX2 connection via USB) • Accuracy ± 0.2 % • For IP 67 models, accuracy ± 0.2 % and 60 metres operating range

Ergo ABS 5-ton tensioner
Load Securing

Ergo ABS 5-ton tensioner

Thanks to the superior Ergo principle; more force, easier operation, and back protection. Pulling instead of pushing! Significantly easier work. The two-stage mechanism provides greater tensioning force. Until now, reaching the next tooth at the end of the tensioning process depended on arm strength. The new patented two-stage mechanism features a practical intermediate step providing a "half tooth". Meaning more tensioning force in small steps. SPANSET two-stage tensioning mechanisms enable safe, fast, powerful, and economical tensioning with minimal effort thanks to the main stage. As a patented Spanset product, this type of tensioner offers significant operational advantages over tensioners from other brands. The patented "strap release method" makes it possible to release the pre-tensioning force in small steps. When there is a risk of the load tipping over during unloading, you can take precautions in good time using a suitable strap. With the new TFI (Tension Force Indicator), it is possible to measure and adjust the applied tensioning force. TFI sizes with capacities of 250, 500, and 750 daN are available. Order your tensioner with TFI to increase safety. Tension the ratchet handle with the self-locking safety catch - pull the locking slide - close the handle - engage the functional slide onto the gear wheel. This is identical on all Spanset tensioners. On Spanset tensioners, the mechanism absolutely never releases by itself. In Spanset patented tensioners, the strongest shocks and heavy operating conditions do not affect the mechanism. Heat, cold, moisture and salt water, impact and rough handling, harsh conditions: The high-quality Spanset ABS tensioner will not let you down even under the worst conditions. Safety and ease of use are an added bonus. The benefits and operation of ErgoABS can be viewed in the video! Request from 2M. New: When making your selection, choose the EPIS system featuring RFID technology.

Faraone ZP10 verticle mast platform
Personnel Access

Faraone ZP10 verticle mast platform

Working height: 10m – Net load: 120kg – Platform length: 0.66m – Platform width: 0.66m – Weight: 340kg – Persons: 1

Forklift crossbeams with hook and boom
Lifting Attachments

Forklift crossbeams with hook and boom

Crossbeams that can be mounted perpendicularly and parallel to forklift forks provide multi-purpose use for your lift trucks. When using the 2M forklift crossbeam, pay attention to the load capacity of the forklift and the load center of gravity.

Gantrail Mark 7 Metal-reinforced rubber rail pad
Crane Technology

Gantrail Mark 7 Metal-reinforced rubber rail pad

The Gantrail Mark 7 crane rail pad is installed between the rail and the rail support plate on heavy-duty cranes, significantly enhancing crane runway performance. During travel, cranes transmit high forces to the structure to which they are mounted. The Mark 7 rail pad increases operational performance by significantly mitigating the effects of forces and vibrations transmitted to the structure. • The Mark 7 rail pad features a specially grooved rubber upper section providing dual-stage compression and a metal-reinforced solid lower section • Under low compressive loads, the voids between the upper grooves narrow, while at maximum loads, the pad compresses completely and the voids are fully closed • Ensures that the rail is not subjected to excessive stress

HAP - Air-driven two-stage pumps
Hydraulic Equipment

HAP - Air-driven two-stage pumps

The HAP two-stage air-driven hydraulic power unit provides a flow rate of 10 l/min at low pressure and automatically switches down to a flow rate of 1.3 l/min at 700 bar pressure. It is driven by a 3 kW electric motor. It consumes 2.4 m³ of air per minute with a 7 bar air inlet. Pump-mounted or remotely connected valve types and oil reservoirs are available. Oil reservoirs feature drain and filler plugs. • 2-stage hydraulic pump • Powerful air motor • External, adjustable pressure relief valve • Selectable control valves • 10 l/min flow rate at low pressure (up to 70 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HAS - Single-acting lightweight aluminium cylinders
Hydraulic Equipment

HAS - Single-acting lightweight aluminium cylinders

HAS series single-acting lightweight aluminium cylinders are specially designed for applications where weight and ease of handling are primary considerations. With a body 50% lighter compared to steel cylinders, all models are corrosion protected and waterproof, featuring lifting capacities from 32 ton to 100 ton at 700 Bar pressure. All models have a wide range of applications and provide safe operation in shipyards, steel fabrication shops, construction, and power plants. Other capacities and stroke lengths are custom manufactured upon request. Aluminium cylinders provide advantages during operation due to being lighter compared to steel body cylinders. However, due to the nature of the material, they are not recommended for applications requiring prolonged use. The recommended service life is approximately 5000 operations at maximum pressure. This lifespan can be extended depending on the most frequently used capacity and maintenance intervals. • Working pressure 700 Bar • Capacity between 32 ton and 110 ton • 152 mm stroke • Working pressure 700 Bar • Capacity between 18 ton and 52 ton • 51 to 105 mm stroke

HCC - Hydraulic chain cutters
Hydraulic Equipment

HCC - Hydraulic chain cutters

Suitable for cutting high-tensile grade 80, 100, 120 chain and reinforced steel bars Cutting capacity between 26 mm and 46 mm diameters Equipped with an overload protection valve as standard. • Working pressure 700 bar • Spring return cylinder • Safety lock system closed over the chain during cutting • Special blade for cutting grade 100 and 120 chain on request

HDA - Double acting hydraulic cylinders
Hydraulic Equipment

HDA - Double acting hydraulic cylinders

HDA - Double acting (push/pull) cylinders find a wide range of applications, particularly in heavy lifting, construction and maintenance work, press and test applications, thanks to their robust double acting structure, high capacity, efficiency, and high pulling forces. On all models, the cylinder collars are threaded, and the cylinder base and piston heads are ready for use for easy mounting. In addition, the listed HHR cylinders are standard production items and can be manufactured in different capacities and strokes upon request. • Lifting capacity from 25 to 520 tons • 700 bar maximum operating pressure • Stroke lengths starting from 152 mm • Double acting design providing separate forces in push and pull • Overload valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston heads • Threaded cylinder collars

Heavy load and machinery transport trolleys
Hydraulic Equipment

Heavy load and machinery transport trolleys

Upon request, machinery skates can be selected with JUWAthan-coated steel wheels. Produced with a special polyurethane-based formulation, this material offers extremely high wear resistance. It is resistant to oil, petrol, and chemicals. JUWAthan compensates for floor irregularities and does not retain metal shavings. It also operates quietly. Seamless one-piece body up to 6 tons. 2M transport trolleys are renowned for their low overall heights as well as their large wheel diameters. Among the wide range of options, there are trolleys suitable for all types of transport tasks. This is because 2M trolleys are adjustable across a wide range and allow unlimited direction changes. 2M trolleys with polyamide wheels are ideal for clean and level floors. Trolleys with JUWAthan wheels are suitable for all types of floors. Transport trolleys with higher load capacities (up to 400 tons) can be delivered upon request!

Heavy-duty machinery skates
Hydraulic Equipment

Heavy-duty machinery skates

RSN industrial low-profile skates are ideal for moving medium-weight loads in the construction, mining, and steel industries. With capacities up to 80 tonnes, these skates can easily move heavy and irregularly shaped loads and are more economical than other lifting equipment. Optional accessories such as turntables and lifting plates can be purchased with RSN skates. • 10 - 80 ton capacity • Low-profile construction • Swivel corner accessories

HEP1 - Electric power units
Hydraulic Equipment

HEP1 - Electric power units

110 and 220 volt single-phase motor, 700 bar max. working pressure. 2.0 and 3.0 litre flow rate at low pressure. 0.25 and 0.4 litre flow rate options at high pressure. Used with high efficiency with single- and double-acting Hi-Force cylinders via 2-way directional control valves and electric solenoid valves.

HEP103 - Two-stage electric hydraulic power unit
Hydraulic Equipment

HEP103 - Two-stage electric hydraulic power unit

Note: For models with an adjustable pressure switch for automatic pressure control, the letters PS must be added to the model number. For models with a pushbutton pendant control, the letters HB must be added to the model number. • Operating pressure 700 bar • Choice of valve types • Compact, lightweight and powerful • Suitable for single and double-acting cylinders • Pump-mounted control lever, pressure gauge and wired remote control

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate
Hydraulic Equipment

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate

HEP 2 Series 2-stage electric hydraulic pump provides a flow rate of 5 to 11 lt/dk at low pressure and 0.65 lt/dk at high pressure. It offers the capability to operate on 110 V, 240 V single-phase and 440 V three-phase voltages. Remote control capability via electric solenoid valves provides high-efficiency operation with single- and double-acting Hi-Force cylinders. Equipped as standard with an external pressure adjustment valve, a 10 and 25 lt oil reservoir, and an oil level dipstick, these pumps can optionally be ordered with accessories such as a pressure gauge set, hydraulic manifold, carrying handle, etc.

HEP3 - Two-stage electric hydraulic power unit-High flow
Hydraulic Equipment

HEP3 - Two-stage electric hydraulic power unit-High flow

HEP 3 Series pumps have the same features as the HEP 2 series, but additionally provide a higher flow rate. (1lt/min high pressure flow rate) HEP 3 Series pumps are ideal for applications requiring speed with higher capacity and longer stroke cylinders or hydraulic equipment. Suitable for continuous operation, these pumps are suitable for outdoor or indoor use with their totally enclosed fan-cooled and quiet operation features.

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate
Hydraulic Equipment

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate

HEP 5 Series pumps deliver the highest flow rate among electric power units. With a low-pressure flow rate of 4 to 17 l/min and a high-pressure flow rate of 2 l/min, these HEP 5 series pumps produce 2.2 kW of power and a maximum pressure of 700 bar. As with all pumps, the transition from low pressure to high pressure occurs at 70 bar.

HFG - Single-acting lock nut hydraulic cylinders
Hydraulic Equipment

HFG - Single-acting lock nut hydraulic cylinders

HFG type single-acting lock nut cylinders combine hydraulic lifting power with mechanical load holding safety. HFG cylinders are ideally used in piling and bridge/viaduct support applications where loads need to be held for extended periods. Once the load is hydraulically lifted, the lock nut on the threaded piston is screwed down against the cylinder body, mechanically securing the load. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 50 mm • Single-acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiting device • Special seals • Standard tilting saddles

HFL - Single acting lock nut short type hydraulic cylinders
Hydraulic Equipment

HFL - Single acting lock nut short type hydraulic cylinders

HFL type single acting lock nut short type cylinders combine hydraulic lifting power with the safety of mechanical load support. Ideally, HFL cylinders are used in piling and bridge/viaduct support applications where the load must be held for extended periods. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 45 mm • Single acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiter • Special seals • Standard tilting saddles • Manufactured with optional capacity and stroke upon request.

HFS - Hydraulic flange spreaders
Hydraulic Equipment

HFS - Hydraulic flange spreaders

HFS hydraulic flange spreaders ensure the safe separation of pipe flanges in the marine, oil, and gas industries. 2 models are available from 0 - 4.5 tonnes and 0 - 10 tonnes. Both models enable the user to open/spread flanges up to 92 mm thick. Hi-Force hydraulic flange spreaders can be used individually or in pairs for spreading large flanges. The use of hydraulic equipment prevents problems experienced during alternative methods, such as hammer blows causing sparks, damage to flanges, and similar hazards. • Capacities from 4.5 - 10 tonnes • Working pressure 700 bar • Supplied in a steel carrying case • Complete with manually operated pump and hose • Optional wedges in different sizes • Suitable for stud lengths up to 41 mm

HHP - Hydraulic punch
Hydraulic Equipment

HHP - Hydraulic punch

Hi-Force offers the HHP series hydraulic hole punchers with a choice of two models. Model HHP30 is supplied with a 30-tonne capacity and single-acting cylinder, and model HHP50 with a 50-tonne capacity and double-acting cylinder. Delivered in a dedicated carrying case complete with 4 punches and dies. • Punching capacity up to 50 tonnes • Throat depth 70 mm • Working pressure 700 bar

HHR - Double acting hollow hydraulic cylinders
Hydraulic Equipment

HHR - Double acting hollow hydraulic cylinders

HHR - Double acting (push/pull) hollow cylinders share the same design features as single acting HHS type cylinders, while offering additional capabilities due to their double acting operation. They provide wider application possibilities, especially in long-stroke cylinders, by substantially increasing operating speed and providing an additional pulling (retraction) force. The listed HHR cylinders are standard models and can be manufactured with different capacities and strokes upon request. • Lifting capacity from 33 to 247 tonnes • 700 bar maximum operating pressure • Stroke lengths from 51 to 305 mm • Double acting design providing separate push and pull forces • Overload relief valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston saddles • Threaded cylinder collars

HHS - Single-acting hollow hole, spring return hydraulic cylinders
Hydraulic Equipment

HHS - Single-acting hollow hole, spring return hydraulic cylinders

11 different cylinder models across 5 distinct capacities from 11 tons to 102 tons with a 700 bar working pressure HHS - Single-acting spring return hollow hole cylinders find wide application particularly in various maintenance and repair, pulling, and bolting applications. Thanks to the through-hole design, bolts/studs or cables/wire ropes can be passed through the centre for pulling and tensioning operations, and they are also utilized in pre-tensioning and pressing applications as well as testing various welded or mechanical connections. When equipped with standard piston heads (included in the set), HHS cylinders can also be used comfortably for regular lifting operations. • 11 to 102 ton lifting capacity • 700 bar maximum operating pressure • Stroke lengths from 25 to 152 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special sealing elements • Optional piston heads • Threaded cylinder collars

High pressure couplers and fittings
Hydraulic Equipment

High pressure couplers and fittings

All hydraulic pressure couplers, fittings, valves, and hoses are designed and manufactured for a maximum working pressure of 700 bar. Featuring a 4:1 safety factor, all these accessories have 3/8" - 18 NPT ports, ensuring the safe operation of your hydraulic system. All components are easily interchangeable and mutually compatible. Hi-Force recommends the use of protective dust caps to protect quick connect couplers from dust and dirt.

High-pressure hydraulic hoses
Hydraulic Equipment

High-pressure hydraulic hoses

Hi-Force high quality hydraulic hoses provide a secure connection for hydraulic equipment. Available in black and red colours. Both ends of the hose feature anti-kink handle guards. Using black hoses for advance flow connections and red hoses for return connections prevents potential misconnections. • Working pressure 700 bar • 4:1 safety factor • Custom lengths available to order

HKP - Hole puncher
Hydraulic Equipment

HKP - Hole puncher

HKP hole punchers are supplied as a set including punches and dies in all standard sizes. They include a hand pump and quick-connect coupler. They are used for punching electrical panels and metal plates during field operations. • 10 ton capacity • Spring return hydraulic cylinder • Working pressure 700 bar