+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Hooks and Safety Latches

Hooks ship with declarations of conformity as standard, and can be delivered with third-party test-house reports. Several of our special hook models carry embossed symbols on the body so deformation and correct lifting angles can be read at a glance.

View Products→

Subcategories

All Products

1–100 of 211 productsPer page102550100
▦ Grid☰ List
1 ton Spannfix - Ratchet lashing strap
Load Securing

1 ton Spannfix - Ratchet lashing strap

• Yellow chrome-plated tensioning mechanism • Non-slip webbing • Quality controlled

1-ton lashing strap
Load Securing

1-ton lashing strap

With SpanSet refining numerous details, this 1-ton lashing offers unparalleled robustness and durability in its class. Key innovations: High tensioning force, a wider and longer tensioning handle for easy tensioning. Working with SpanSet makes work effortless. The 1-ton lashing strap is specially woven and has a smooth surface. This prevents snagging and fraying. Info Both lashings are suitable for use even under the toughest conditions. Superior coating technology guarantees a long service life.

2M
Load Securing

10-tonne ABS stops heavy loads with double the power

Heat, cold, moisture and salt water, impact and misuse, harsh conditions: SpanSet quality ABS ratchet will not let you down even under the harshest conditions. Safety and ease of use are an added bonus. During the tensioning process, the final tooth previously depended on arm force. Thanks to the patented double-layer drive gear, the tensioning process provides greater safety and convenience in practical half steps. This delivers higher pretensioning force and more practical operation through smaller increments. Standard ratchets release the strap in a single motion. During release, if the load is not stable, it can tilt dangerously. The ABS tensioning system releases the pretension force in small steps, allowing you to take precautions against the risk of the load toppling over. Ideal for operators of any physical strength. Requiring less effort, this lighter and easy-to-use 10-tonne ratchet provides greater safety and power with less exertion. New: When choosing, opt for the EPIS system featuring RFID technology. Lashing straps must be inspected at least once a year by qualified personnel. Please contact 2M Makina.

250 kg - Buckle 25 mm
Load Securing

250 kg - Buckle 25 mm

• Non-slip webbing • Quality controlled

5 ton Spannfix - Lashing strap
Load Securing

5 ton Spannfix - Lashing strap

• Achieve the required safety tension effortlessly. • Low cost • Less tensioning force • Back protection • Easy and comfortable handling • Durable construction

500 kg - Buckle 25 mm
Load Securing

500 kg - Buckle 25 mm

• Non-slip webbing • Quality controlled

750 kg - Ratchet 35 mm
Load Securing

750 kg - Ratchet 35 mm

• Non-slip webbing • Quality controlled

ABS 4-ton ratchet lashing
Load Securing

ABS 4-ton ratchet lashing

Effectively coated against abrasion, thermal fine fibre, interwoven tubular webbing and an elongation of under 4% – this is the anti-blocking ABS lashing strap. Now even better with new, wear-resistant high-tech yarns. The result: Greater safety for a long service life! We offer two different options; consult us for the appropriate use, whether applying pull or push tension.

ABS 5-tonne tensioner
Load Securing

ABS 5-tonne tensioner

Standard ratchets release the strap in a single motion. During release, if the load is not stable, it can dangerously tip over. The ABS tensioning system releases the pretension force in small steps, allowing you to take precautions against the risk of the load toppling over. During the tensioning process, the final tooth previously depended on arm force. Thanks to the patented double-tier drive gear, tensioning provides greater safety and convenience with practical half-steps. This achieves greater pretensioning force and more practical operation through small steps. Heat, cold, moisture and salt water, impact and rough use, harsh conditions: The SpanSet quality ABS tensioner will not let you down even under the harshest conditions. Safety and ease of use to boot. Equipped with a PVC label protector to further extend label life. A shortened label length, the use of stronger material, and an additional PVC sleeve encasing the entire label are among the features of the new label. You Can Easily Measure the Tensioning Force. With the new TFI (Tension Force Indicator), it is possible to measure and adjust the applied tensioning force, and TFI sizes with capacities of 250, 500 and 750 daN are available. Order your tensioner with TFI and increase safety.

ACP - Self-centering hydraulic pullers
Hydraulic Equipment

ACP - Self-centering hydraulic pullers

ACP heavy-duty self-centering hydraulic pullers are available in 4 different models. The 3 legs are interconnected by a mechanism that allows them to self-center automatically. Pullers with capacities between 10 and 50 tonnes are 3-legged, and both 2-leg and 3-leg models of the 10-tonne puller are available. All models include a detachable hollow piston, manual pump, hydraulic hose, and a 100 mm diameter pressure gauge. All models are designed for pushing, pulling, mounting, and dismounting press-fitted or heat-fitted parts such as gears, bearings, sleeves, gear wheels, internal bearings, wheels, sprockets, flywheels, etc. • Working capacity between 10 and 50 tonnes • Quick setup, easy to use • Manufactured with legs made of high-quality hot-forged steel.

AHP - Air-driven hydrotest pumps - Standard flow
Hydraulic Equipment

AHP - Air-driven hydrotest pumps - Standard flow

• Output pressure ranging from 6 to 2931 bar • Suitable for use with various fluids • 150 mm diameter dual-scale pressure gauge • Air consumption 0.79 m³/min • Variable output flow rate • Maximum weight 23 kg • Includes air inlet filter, pressure regulator, and lightweight oil tank • 8 different models available with pressure capacities ranging from 6 bar to 2931 bar • Optional stainless steel tank produced • Optional IP65-rated piston-mounted microswitch stroke counter available

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow
Hydraulic Equipment

AHP-CR - Air driven hydrotest pumps, with chart recorder-Standard flow

Hi-Force AHP-CR series air driven hydrostatic pressure test pumps are offered to users in 8 models with different capacities ranging from 6 bar (87 PSI) up to 2931 bar (42500 PSI). Fitted as standard on all pumps is a chart recorder capable of recording values on a single chart for up to 4 hours. All models are suitable for operation with various fluids including water, and feature a glycerine-filled pressure gauge, air inlet filter, lubricator and pressure regulator unit, plastic fluid reservoir, pump start/stop valve, and a reinforced stainless steel skid frame. A recorder by-pass valve and pressure release valve are fitted on the pump as standard. Optionally, a stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorders with different clock speeds can be supplied. All units have a maximum weight of 31kg. • Output pressure up to 2931 Bar • Suitable for use with various fluids • 150mm dual scale anti-vibration pressure gauge • Air consumption 28 scmf (0.79 m/min) • Infinitely variable output pressure and flow • 7 litre capacity • Supplied with 50 recording charts, 1 chart pen, with additional charts and pens available.

AHP11 - Single-Stage Air Hydraulic Pump
Hydraulic Equipment

AHP11 - Single-Stage Air Hydraulic Pump

Working pressure is 700 bar, operating with 7 bar air pressure. The compact, lightweight and powerful AHP11 single-stage air-driven hydraulic power unit is an economical and mobile (portable) alternative to manual pumps. The pump pedal is suitable for both foot and hand operation. All pumps are delivered with the oil reservoir pre-filled with oil, ensuring the pumps are ready for use immediately upon supply. • 2-way and 4-way control valve options • Internal overload safety relief valve • Oil reservoir level indicator • Standard oil reservoir capacity up to 10 litres

AHP2 - Air driven hydrotest pumps - High flow
Hydraulic Equipment

AHP2 - Air driven hydrotest pumps - High flow

AHP2 series air driven hydrostatic pressure test pumps offer 5 different model options with output pressure capacities ranging from 17 Bar (246 PSI) to 1634 Bar (23700 PSI). All models feature a compact design and operate compatibly with various fluids, while incorporating a 150mm diameter glycerine filled pressure gauge, air filter, lubricator and pressure regulator, lightweight fluid reservoir, pump on/off valve, and a reinforced stainless steel protective cage. Optional stainless steel reservoir, pressure isolation valve, stroke counter system, pressure gauge calibration certificate, and chart recorder with various clock speeds can be supplied. • Output pressure ranging from 17.2 to 1634.1 bar • Suitable for use with various fluids • 150 mm diameter dual scale pressure gauge • Air consumption 1.59 m³/min • Variable output pressure and flow rate • Air inlet filter, pressure regulator, lightweight oil tank standard • Optional stainless steel tank available • Optional IP65 class piston-mounted microswitch stroke counter available

ATDP - Air-driven double-acting twin hydrotest pumps
Hydraulic Equipment

ATDP - Air-driven double-acting twin hydrotest pumps

Air-driven twin double-acting ATDP series hydrotest pumps are available in 3 different models with capacities ranging from 87 bar to 1489 bar. Thanks to the twin double-acting design, the fluid volume delivered per stroke is significantly higher compared to the AHP and AHP2 series. All models feature a 150mm diameter glycerine-filled pressure gauge, air inlet filter, regulator, lubricator unit, and pump on/off valve. If the pump is to be used with special fluids or chemicals, it can be manufactured with Viton and ethylene propylene seals upon order. Seals made of different materials can be manufactured upon request. • Output pressure ranging from 87 to 1489 bar • Suitable for use with various fluids • Twin double-acting design allows high-volume flow • Air consumption: 6m³/min • Can be used with various fluids, including water • 150mm diameter dual scale pressure gauge • Variable output pressure and flow • Air inlet filter, regulator and lubricator • Optional stainless steel reservoir available, IP65 rated piston-mounted microswitch stroke counter available • Weather-resistant paint finish, pressure isolation valve

BC - Battery-powered cable lug crimping tools
Hydraulic Equipment

BC - Battery-powered cable lug crimping tools

The battery-operated lug crimping tools in the BC range include 4 models, offering either a “C” shaped jaw or a parallel guide design with a 360-degree rotating head. While providing all the versatility of the manually operated CH and SC range, this product range increases speed and offers ease of use due to battery operation. All models are supplied with a battery charger, shoulder strap, and tool storage case. In addition to the standard die sets supplied with each crimping tool as indicated, optional die sets are also available as shown in the table below. • Supplied with a standard die set • Battery status • Efficient and fast battery charging

BRAVO
Manual Lifting Equipment

BRAVO

The Tractel lever chain hoist has proven its quality and durability through simple and safe operation. Along with its low weight and ergonomic housing, its maintenance-free use is extremely easy. The chain is released by turning the hand wheel or by pulling the unloaded chain. Under load, the pressure brake prevents unintentional lowering of the load. Special requests can be made for longer chain lengths. Call 2M. • Simple and safe operation • Free-chaining position • Standard series production with 1.5 m round link chain • Smooth operation with steel bearings • Thanks to the free-chaining handwheel, the load hook can be pulled into the desired position with a single hand movement while the directional lever is in neutral • The load is held safely during position changes of the directional lever • Easily portable anywhere thanks to its lightweight and compact design • Special forged steel swivel suspension and load hooks with safety latches, tested for 10,000 open/close cycles • Maximum load is lifted with minimum lever effort; superior mechanical efficiency • Load chain is premium-quality German RUD brand.

BUX - BM and BMP series battery-powered lifting magnets
Lifting Attachments

BUX - BM and BMP series battery-powered lifting magnets

• Built-in 12V battery provides at least 8 hours of continuous operation • Handheld infrared remote control operates the magnet from up to 5 m away • Special sensor prevents power cut-off during lifting • Release is performed by pressing two buttons to prevent accidents • Visual and audible low battery warning • If the battery level is too low, the magnet cannot be switched on • Opening cover allows easy access to the battery and control panel • Additional lift and release buttons located on the magnet • LED indicator showing battery charge level and thermal automatic circuit breaker

BW - Backup wrench
Hydraulic Equipment

BW - Backup wrench

BW series backup wrenches prevent the bolt being tightened from rotating and provide easy tightening and removal using a lever to prevent nut kickback. Once clamped, the T-Bar design adjustable reaction point remains locked until the operation is completed. • Suitable for use with TWS-N and TWH-N torque wrenches • Interchangeable hexagon links • Positive release mechanism

CH - Cable crimping tool
Hydraulic Equipment

CH - Cable crimping tool

CH series cable lug crimping tools feature C-jaw and parallel guide type options. Models with a 180° rotating head facilitate working in confined spaces. Pump units include the HP227FPC foot-operated pump set. This set also includes an elbow fitting, pressure gauge and block, and a 3-metre hydraulic hose with male coupler. All models except CH1000 include HP227FC, MB1 metal case, the selected crimping tool and its dies. In addition to the standard die sets supplied with each cable crimping tool as specified, optional die sets are also available as shown in the table below. • CH80 and CH63 models are suitable for crimping connectors up to 630 mm² cross-section • CH30, CH32 and CH40 CH-Cable crimping tools are suitable for crimping uninsulated terminals up to 400 mm² cross-section • CH1000 is suitable for crimping transmission and distribution lines up to 1000mm² cross-section • 7 different model options • Die set included with the product • CH21 model is suitable for crimping uninsulated terminals with 240 mm² cross-section • Working pressure 700 bar • Each includes a quick-connect coupler • Optional C-jaw or parallel jaw design • Easy connection option for confined spaces

Control/Directional valves
Hydraulic Equipment

Control/Directional valves

PMV type flow control valves are mounted on the pump. RMV type flow control valves can be mounted remotely from the pump. • Working pressure 700 bar • Can be mounted on the pump or at a different location • Manual and solenoid types are available

CT - Hydraulic cutters with integral pump
Hydraulic Equipment

CT - Hydraulic cutters with integral pump

2 models are available capable of cutting 25mm diameter wire rope and 40mm diameter cable. Used for cutting wire rope, metal bar, wire strands and cable. • Cutting capacity up to 40mm • Capable of cutting a wide range of materials • Self-contained hydraulic design

Digital pressure gauges
Hydraulic Equipment

Digital pressure gauges

Driven by the demand for digital gauges, Hi-Force has added the HDG1 and HDD1 digital gauges to its product range, as well as the HPT1 pressure transducer featuring the HDD1 gauge. Offering users higher accuracy (0.5% terminal point accuracy), these models represent a significant advancement compared to dial gauges with 1% accuracy. HPT1 pressure transducers also provide users with the option of remote pressure reading, which is preferred in certain applications. • Pressure measurement capability up to 1.000 Bar (14.503 PSI) • Readout in Bar, PSI, mPa, kg/cm³ units as well as other user-defined measuring units via the programmable unit • Compatible with a wide variety of fluids thanks to laser-welded stainless steel sensor and socket • Tare function, minimum and maximum memory, blue backlit display, rubber protective boot and IP67 waterproof enclosure • Minimum 2.000 hours battery life

DYNAFOR® Remote-controlled digital crane scale - LLXh
Crane Technology

DYNAFOR® Remote-controlled digital crane scale - LLXh

The LLXh, the new remote-controlled model of the Dynafor LLX series, is a load scale that delivers precision measurements, can be fitted to various crane hooks, and safely transported to any working site with its carrying case. Operating time from 300 hours to 1000 hours (varies depending on application) • Capacity from 15 tonnes to 250 tonnes • Display operated via wireless communication up to 80 metres in open space • 2.4 GHz international radio frequency compliance • Interchangeable display • Combination with various sensors and displays • Resistant to sudden shocks and weather conditions • CEM certification • Optional connection capability (PC/dynafor LLX2 connection via USB) • Accuracy ± 0.2 % • For IP 67 models, accuracy ± 0.2 % and 60 metres operating range

Ergo ABS 5-ton tensioner
Load Securing

Ergo ABS 5-ton tensioner

Thanks to the superior Ergo principle; more force, easier operation, and back protection. Pulling instead of pushing! Significantly easier work. The two-stage mechanism provides greater tensioning force. Until now, reaching the next tooth at the end of the tensioning process depended on arm strength. The new patented two-stage mechanism features a practical intermediate step providing a "half tooth". Meaning more tensioning force in small steps. SPANSET two-stage tensioning mechanisms enable safe, fast, powerful, and economical tensioning with minimal effort thanks to the main stage. As a patented Spanset product, this type of tensioner offers significant operational advantages over tensioners from other brands. The patented "strap release method" makes it possible to release the pre-tensioning force in small steps. When there is a risk of the load tipping over during unloading, you can take precautions in good time using a suitable strap. With the new TFI (Tension Force Indicator), it is possible to measure and adjust the applied tensioning force. TFI sizes with capacities of 250, 500, and 750 daN are available. Order your tensioner with TFI to increase safety. Tension the ratchet handle with the self-locking safety catch - pull the locking slide - close the handle - engage the functional slide onto the gear wheel. This is identical on all Spanset tensioners. On Spanset tensioners, the mechanism absolutely never releases by itself. In Spanset patented tensioners, the strongest shocks and heavy operating conditions do not affect the mechanism. Heat, cold, moisture and salt water, impact and rough handling, harsh conditions: The high-quality Spanset ABS tensioner will not let you down even under the worst conditions. Safety and ease of use are an added bonus. The benefits and operation of ErgoABS can be viewed in the video! Request from 2M. New: When making your selection, choose the EPIS system featuring RFID technology.

Faraone ZP10 verticle mast platform
Personnel Access

Faraone ZP10 verticle mast platform

Working height: 10m – Net load: 120kg – Platform length: 0.66m – Platform width: 0.66m – Weight: 340kg – Persons: 1

Forklift crossbeams with hook and boom
Lifting Attachments

Forklift crossbeams with hook and boom

Crossbeams that can be mounted perpendicularly and parallel to forklift forks provide multi-purpose use for your lift trucks. When using the 2M forklift crossbeam, pay attention to the load capacity of the forklift and the load center of gravity.

Gantrail Mark 7 Metal-reinforced rubber rail pad
Crane Technology

Gantrail Mark 7 Metal-reinforced rubber rail pad

The Gantrail Mark 7 crane rail pad is installed between the rail and the rail support plate on heavy-duty cranes, significantly enhancing crane runway performance. During travel, cranes transmit high forces to the structure to which they are mounted. The Mark 7 rail pad increases operational performance by significantly mitigating the effects of forces and vibrations transmitted to the structure. • The Mark 7 rail pad features a specially grooved rubber upper section providing dual-stage compression and a metal-reinforced solid lower section • Under low compressive loads, the voids between the upper grooves narrow, while at maximum loads, the pad compresses completely and the voids are fully closed • Ensures that the rail is not subjected to excessive stress

HAP - Air-driven two-stage pumps
Hydraulic Equipment

HAP - Air-driven two-stage pumps

The HAP two-stage air-driven hydraulic power unit provides a flow rate of 10 l/min at low pressure and automatically switches down to a flow rate of 1.3 l/min at 700 bar pressure. It is driven by a 3 kW electric motor. It consumes 2.4 m³ of air per minute with a 7 bar air inlet. Pump-mounted or remotely connected valve types and oil reservoirs are available. Oil reservoirs feature drain and filler plugs. • 2-stage hydraulic pump • Powerful air motor • External, adjustable pressure relief valve • Selectable control valves • 10 l/min flow rate at low pressure (up to 70 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HAS - Single-acting lightweight aluminium cylinders
Hydraulic Equipment

HAS - Single-acting lightweight aluminium cylinders

HAS series single-acting lightweight aluminium cylinders are specially designed for applications where weight and ease of handling are primary considerations. With a body 50% lighter compared to steel cylinders, all models are corrosion protected and waterproof, featuring lifting capacities from 32 ton to 100 ton at 700 Bar pressure. All models have a wide range of applications and provide safe operation in shipyards, steel fabrication shops, construction, and power plants. Other capacities and stroke lengths are custom manufactured upon request. Aluminium cylinders provide advantages during operation due to being lighter compared to steel body cylinders. However, due to the nature of the material, they are not recommended for applications requiring prolonged use. The recommended service life is approximately 5000 operations at maximum pressure. This lifespan can be extended depending on the most frequently used capacity and maintenance intervals. • Working pressure 700 Bar • Capacity between 32 ton and 110 ton • 152 mm stroke • Working pressure 700 Bar • Capacity between 18 ton and 52 ton • 51 to 105 mm stroke

HCC - Hydraulic chain cutters
Hydraulic Equipment

HCC - Hydraulic chain cutters

Suitable for cutting high-tensile grade 80, 100, 120 chain and reinforced steel bars Cutting capacity between 26 mm and 46 mm diameters Equipped with an overload protection valve as standard. • Working pressure 700 bar • Spring return cylinder • Safety lock system closed over the chain during cutting • Special blade for cutting grade 100 and 120 chain on request

HDA - Double acting hydraulic cylinders
Hydraulic Equipment

HDA - Double acting hydraulic cylinders

HDA - Double acting (push/pull) cylinders find a wide range of applications, particularly in heavy lifting, construction and maintenance work, press and test applications, thanks to their robust double acting structure, high capacity, efficiency, and high pulling forces. On all models, the cylinder collars are threaded, and the cylinder base and piston heads are ready for use for easy mounting. In addition, the listed HHR cylinders are standard production items and can be manufactured in different capacities and strokes upon request. • Lifting capacity from 25 to 520 tons • 700 bar maximum operating pressure • Stroke lengths starting from 152 mm • Double acting design providing separate forces in push and pull • Overload valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston heads • Threaded cylinder collars

Heavy load and machinery transport trolleys
Hydraulic Equipment

Heavy load and machinery transport trolleys

Upon request, machinery skates can be selected with JUWAthan-coated steel wheels. Produced with a special polyurethane-based formulation, this material offers extremely high wear resistance. It is resistant to oil, petrol, and chemicals. JUWAthan compensates for floor irregularities and does not retain metal shavings. It also operates quietly. Seamless one-piece body up to 6 tons. 2M transport trolleys are renowned for their low overall heights as well as their large wheel diameters. Among the wide range of options, there are trolleys suitable for all types of transport tasks. This is because 2M trolleys are adjustable across a wide range and allow unlimited direction changes. 2M trolleys with polyamide wheels are ideal for clean and level floors. Trolleys with JUWAthan wheels are suitable for all types of floors. Transport trolleys with higher load capacities (up to 400 tons) can be delivered upon request!

Heavy-duty machinery skates
Hydraulic Equipment

Heavy-duty machinery skates

RSN industrial low-profile skates are ideal for moving medium-weight loads in the construction, mining, and steel industries. With capacities up to 80 tonnes, these skates can easily move heavy and irregularly shaped loads and are more economical than other lifting equipment. Optional accessories such as turntables and lifting plates can be purchased with RSN skates. • 10 - 80 ton capacity • Low-profile construction • Swivel corner accessories

HEP1 - Electric power units
Hydraulic Equipment

HEP1 - Electric power units

110 and 220 volt single-phase motor, 700 bar max. working pressure. 2.0 and 3.0 litre flow rate at low pressure. 0.25 and 0.4 litre flow rate options at high pressure. Used with high efficiency with single- and double-acting Hi-Force cylinders via 2-way directional control valves and electric solenoid valves.

HEP103 - Two-stage electric hydraulic power unit
Hydraulic Equipment

HEP103 - Two-stage electric hydraulic power unit

Note: For models with an adjustable pressure switch for automatic pressure control, the letters PS must be added to the model number. For models with a pushbutton pendant control, the letters HB must be added to the model number. • Operating pressure 700 bar • Choice of valve types • Compact, lightweight and powerful • Suitable for single and double-acting cylinders • Pump-mounted control lever, pressure gauge and wired remote control

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate
Hydraulic Equipment

HEP2 - Two-stage electric hydraulic power unit-Standard flow rate

HEP 2 Series 2-stage electric hydraulic pump provides a flow rate of 5 to 11 lt/dk at low pressure and 0.65 lt/dk at high pressure. It offers the capability to operate on 110 V, 240 V single-phase and 440 V three-phase voltages. Remote control capability via electric solenoid valves provides high-efficiency operation with single- and double-acting Hi-Force cylinders. Equipped as standard with an external pressure adjustment valve, a 10 and 25 lt oil reservoir, and an oil level dipstick, these pumps can optionally be ordered with accessories such as a pressure gauge set, hydraulic manifold, carrying handle, etc.

HEP3 - Two-stage electric hydraulic power unit-High flow
Hydraulic Equipment

HEP3 - Two-stage electric hydraulic power unit-High flow

HEP 3 Series pumps have the same features as the HEP 2 series, but additionally provide a higher flow rate. (1lt/min high pressure flow rate) HEP 3 Series pumps are ideal for applications requiring speed with higher capacity and longer stroke cylinders or hydraulic equipment. Suitable for continuous operation, these pumps are suitable for outdoor or indoor use with their totally enclosed fan-cooled and quiet operation features.

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate
Hydraulic Equipment

HEP5 - Two-stage electric hydraulic power unit-Highest flow rate

HEP 5 Series pumps deliver the highest flow rate among electric power units. With a low-pressure flow rate of 4 to 17 l/min and a high-pressure flow rate of 2 l/min, these HEP 5 series pumps produce 2.2 kW of power and a maximum pressure of 700 bar. As with all pumps, the transition from low pressure to high pressure occurs at 70 bar.

HFG - Single-acting lock nut hydraulic cylinders
Hydraulic Equipment

HFG - Single-acting lock nut hydraulic cylinders

HFG type single-acting lock nut cylinders combine hydraulic lifting power with mechanical load holding safety. HFG cylinders are ideally used in piling and bridge/viaduct support applications where loads need to be held for extended periods. Once the load is hydraulically lifted, the lock nut on the threaded piston is screwed down against the cylinder body, mechanically securing the load. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 50 mm • Single-acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiting device • Special seals • Standard tilting saddles

HFL - Single acting lock nut short type hydraulic cylinders
Hydraulic Equipment

HFL - Single acting lock nut short type hydraulic cylinders

HFL type single acting lock nut short type cylinders combine hydraulic lifting power with the safety of mechanical load support. Ideally, HFL cylinders are used in piling and bridge/viaduct support applications where the load must be held for extended periods. • 50 to 520 tonnes lifting capacity • 700 bar maximum operating pressure • Stroke lengths starting from 45 mm • Single acting load return design • Chrome-plated cylinder surface • Wear-resistant threaded piston • Stroke limiter • Special seals • Standard tilting saddles • Manufactured with optional capacity and stroke upon request.

HFS - Hydraulic flange spreaders
Hydraulic Equipment

HFS - Hydraulic flange spreaders

HFS hydraulic flange spreaders ensure the safe separation of pipe flanges in the marine, oil, and gas industries. 2 models are available from 0 - 4.5 tonnes and 0 - 10 tonnes. Both models enable the user to open/spread flanges up to 92 mm thick. Hi-Force hydraulic flange spreaders can be used individually or in pairs for spreading large flanges. The use of hydraulic equipment prevents problems experienced during alternative methods, such as hammer blows causing sparks, damage to flanges, and similar hazards. • Capacities from 4.5 - 10 tonnes • Working pressure 700 bar • Supplied in a steel carrying case • Complete with manually operated pump and hose • Optional wedges in different sizes • Suitable for stud lengths up to 41 mm

HHP - Hydraulic punch
Hydraulic Equipment

HHP - Hydraulic punch

Hi-Force offers the HHP series hydraulic hole punchers with a choice of two models. Model HHP30 is supplied with a 30-tonne capacity and single-acting cylinder, and model HHP50 with a 50-tonne capacity and double-acting cylinder. Delivered in a dedicated carrying case complete with 4 punches and dies. • Punching capacity up to 50 tonnes • Throat depth 70 mm • Working pressure 700 bar

HHR - Double acting hollow hydraulic cylinders
Hydraulic Equipment

HHR - Double acting hollow hydraulic cylinders

HHR - Double acting (push/pull) hollow cylinders share the same design features as single acting HHS type cylinders, while offering additional capabilities due to their double acting operation. They provide wider application possibilities, especially in long-stroke cylinders, by substantially increasing operating speed and providing an additional pulling (retraction) force. The listed HHR cylinders are standard models and can be manufactured with different capacities and strokes upon request. • Lifting capacity from 33 to 247 tonnes • 700 bar maximum operating pressure • Stroke lengths from 51 to 305 mm • Double acting design providing separate push and pull forces • Overload relief valve • Wear-resistant piston • Low-friction surfaces • Special seals • Optional piston saddles • Threaded cylinder collars

HHS - Single-acting hollow hole, spring return hydraulic cylinders
Hydraulic Equipment

HHS - Single-acting hollow hole, spring return hydraulic cylinders

11 different cylinder models across 5 distinct capacities from 11 tons to 102 tons with a 700 bar working pressure HHS - Single-acting spring return hollow hole cylinders find wide application particularly in various maintenance and repair, pulling, and bolting applications. Thanks to the through-hole design, bolts/studs or cables/wire ropes can be passed through the centre for pulling and tensioning operations, and they are also utilized in pre-tensioning and pressing applications as well as testing various welded or mechanical connections. When equipped with standard piston heads (included in the set), HHS cylinders can also be used comfortably for regular lifting operations. • 11 to 102 ton lifting capacity • 700 bar maximum operating pressure • Stroke lengths from 25 to 152 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special sealing elements • Optional piston heads • Threaded cylinder collars

High pressure couplers and fittings
Hydraulic Equipment

High pressure couplers and fittings

All hydraulic pressure couplers, fittings, valves, and hoses are designed and manufactured for a maximum working pressure of 700 bar. Featuring a 4:1 safety factor, all these accessories have 3/8" - 18 NPT ports, ensuring the safe operation of your hydraulic system. All components are easily interchangeable and mutually compatible. Hi-Force recommends the use of protective dust caps to protect quick connect couplers from dust and dirt.

High-pressure hydraulic hoses
Hydraulic Equipment

High-pressure hydraulic hoses

Hi-Force high quality hydraulic hoses provide a secure connection for hydraulic equipment. Available in black and red colours. Both ends of the hose feature anti-kink handle guards. Using black hoses for advance flow connections and red hoses for return connections prevents potential misconnections. • Working pressure 700 bar • 4:1 safety factor • Custom lengths available to order

HKP - Hole puncher
Hydraulic Equipment

HKP - Hole puncher

HKP hole punchers are supplied as a set including punches and dies in all standard sizes. They include a hand pump and quick-connect coupler. They are used for punching electrical panels and metal plates during field operations. • 10 ton capacity • Spring return hydraulic cylinder • Working pressure 700 bar

HLS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HLS - Single acting spring return hydraulic cylinders

At 700 bar operating pressure, cylinders in 6 different capacities and 10 different models from 10 tons to 150 tons HLS - Short Cylinders, the cylinders with the widest field of application worldwide, provide solutions with their spring return design, short closed height, and optimum stroke lengths. Widely used in power plants, shipyards and repair-maintenance workshops, construction and railways, mining and iron-steel industries, as well as oil and gas facilities, HLS type short cylinders offer an economical and portable solution thanks to their compact and powerful construction. • Capacities from 10 to 147 tons • 700 bar maximum operating pressure • Stroke lengths from 25 to 60 mm • Spring return design

HP - Hand Pumps Steel and aluminium body
Hydraulic Equipment

HP - Hand Pumps Steel and aluminium body

All pumps are delivered with the oil tank filled with oil, making the pumps ready for use immediately upon supply. Various pump models are available for use with single- and double-acting cylinders. HP-class pumps are most commonly utilized when completely independent and mobile (portable) pumps are required. hydraulic equipment • Single- and two-speed pumps • 700 bar working pressure • 13 different models, single- and double-acting • Metal construction • Oil capacity from 1 litre to 10 litres • 2-, 3- and 4-way control valve options • Standard pressure relief valve and overload valve • Operation with minimum handle effort • Durable all-steel construction

HPF - Workshop presses
Hydraulic Equipment

HPF - Workshop presses

• Capacities from 10 to 200 tons • 250 mm or 330 mm stroke options • Working pressure 700 bar • Adjustable work table • Pressure gauge • Different configurations available upon request • Manual, pneumatic and electric pump options

HPP - Petrol engine hydraulic power units
Hydraulic Equipment

HPP - Petrol engine hydraulic power units

• 10 l/min flow rate at low pressure (up to 700 bar) • 1.3 l/min flow rate at high pressure • Working pressure 700 bar

HPR - Pin & bush replacement tool kit

HPR - Pin & bush replacement tool kit

The Hi-Force HPR pin and bush replacement kit range is available with a choice of 37 or 50 tonne capacity, both available with either a manual or air driven hydraulic pump unit. Both the HPR-1 and HPR-2 can also be supplied without a hydraulic pump for users who already have a suitable 700 Bar pump within their tool inventory. All models operate at a maximum working pressure of 700 Bar and incorporate either a standard HHA372 37 tonne capacity or HHA504, 50 tonne capacity lightweight aluminium hydraulic cylinder. Provided by Hi-Force, this product is designed for manufacturers, service centres and users of heavy plant vehicles used in the construction and mining industries. Supplied in a smart metal case for easy portability, all kits include a range of standard tooling, with non-standard and bespoke tooling available upon request. • Safe, simple and hands-free operation • Saves up to 60% time and labour • Flexible and adaptable system • Ideal for on-site and workshop use • Improved safety compared to traditional methods • Suitable for a wide range of pin & bush applications • Multi-purpose aluminium hollow piston cylinder

HPS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HPS - Single acting spring return hydraulic cylinders

Short stroke special profile hydraulic cylinders in 9 different models and 8 capacities at 700 bar working pressure HPS - Pad type short cylinders offer a very practical closed height and stroke combination. These spring return cylinders are ideal for use where minimum closed height and maximum stroke length are critical. HPS type cylinders are especially used in maintenance and repair work, steel construction, weld surface alignment, and flange spreading applications. • Capacities from 4.5 to 147 tons • 700 bar maximum operating pressure • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals

HSP - Electric driven split flow, multi-outlet pumps
Hydraulic Equipment

HSP - Electric driven split flow, multi-outlet pumps

HSP series electric driven split-flow hydraulic pumps are designed to distribute an equal volume of oil from each control valve, regardless of any variation in hydraulic pressure. In this series, various options are offered, ranging from a 2-outlet model with manual directional control valves to an 8-outlet model with electric solenoid valves. Each valve outlet is directly connected to an independent electric-driven internal piston pump. This technology allows each internal piston pump to deliver an equal volume of oil per unit time, irrespective of changes in operating pressure at each control valve outlet. With the HSP split-flow pump, large, unequally weighted loads can be lifted in a synchronized, level, and controlled manner using multiple lifting points. In the electric valve option, each valve is controlled via an electrical control box with on/off switches. Additionally, a synchronized lifting button is provided for each control valve. The maximum working pressure of all HSP pumps is 700 bar, and an adjustable relief valve is located at each outlet for easy pressure control between 70-700 bar. All system components are detailed in the following pages. Optional equipment includes a PLC-controlled synchronized lifting/lowering system capable of setting the target lifting weight, maximum tolerance between lifting points, and other fine adjustments (all controlled by a central touchscreen computer). This system offers a precise solution especially for controlled lowering operations. • Working pressure 700 Bar • Multiple outlet valve options • Precise control for synchronized lifting movement

HSS - Single acting spring return hydraulic cylinders
Hydraulic Equipment

HSS - Single acting spring return hydraulic cylinders

HSS - Multi-purpose single acting spring return cylinders find excellent application across maintenance and repair, transport, production, and manufacturing/construction sectors with a wide range of capacities, closed heights, and stroke lengths. All models feature threaded cylinder collars, and the cylinder base and piston rod ends are ready for easy mounting. • Lifting capacity from 4.5 to 109 tonnes • 700 bar maximum working pressure • Stroke lengths from 25 to 457 mm • Spring return design • Wear-resistant piston • Low-friction surfaces • Special seals • Optional tilting piston saddles • Threaded cylinder collars

HSWC - Hydraulic wire rope cutters with built-in pump
Hydraulic Equipment

HSWC - Hydraulic wire rope cutters with built-in pump

Easy to transport due to its compact design. In addition to many sectors such as wire rope manufacturing, elevator manufacturing, and construction works, they are also used underwater. 3 models available. • Cutting capacity for wire ropes between 19 mm and 44 mm in diameter • Steel construction • Low-effort operation

HTWP - Torque wrench pumps
Hydraulic Equipment

HTWP - Torque wrench pumps

HTWP Series hydraulic torque wrench pumps are suitable for use with all Hi-Force torque wrench models. Highly practical with a maximum working pressure of 700 bar, an easily adjustable torque relief valve, and air or electric motor options, these torque pumps are supplied as standard with 4-meter torque wrench hoses with quick-connect couplings, a glycerine-filled pressure gauge, and a remote control pendant with a 3-meter cable. Air motor versions feature an internal filter, regulator, lubricator with pressure gauge, and an exhaust-type air cooling system. Note: Pumps with model numbers with an H suffix feature a 60 Hz motor. • 700 bar working pressure and internal overload safety valve • Manual electric or air pump options • Dual-scale glycerine-filled pressure gauge • 3-meter remote control, 4-meter hose set • Protective roll frame and carrying handles • Externally adjustable pressure control (torque relief) valve • Pendant controlled

HVL - Single-acting load return hydraulic cylinders
Hydraulic Equipment

HVL - Single-acting load return hydraulic cylinders

HVL - Low profile ultra-short cylinders provide precise lifting and adjustment in the tightest spaces with their 6 mm stroke. Particularly ideal for use in machinery and machine tool alignment, turbine and other heavy assembly operations. The bases of these load return cylinders must be fully supported during use. • Lifting capacity from 10 to 104 tonnes • 700 bar maximum operating pressure • Single-acting load return design • Wear-resistant piston • Low-friction surfaces • Special seals

Hydraulic machinery jacks
Hydraulic Equipment

Hydraulic machinery jacks

Because the lifting claws have a cradle movement in their sockets, they adapt to the load point in any type of loading, and the risk of jamming and accidents is eliminated thanks to the uniform distribution of force across the surface. • Lifting claws ensure fast lifting and lowering operations; damaged claws can be replaced easily and quickly. • Robust, swivel-out feet prevent the jack from tipping over under load • The rotatable pump operating lever bracket allows the pump lever to be turned to the desired position, enabling the jack to be used even in the most confined spaces. • With the adjustable precision release valve, lowering of the lifted load is ensured with sensitive and millimeter precision. • Safety valve protects the jack from overload. • Continuous and synchronized operation is possible when coupled with electro-hydraulic central systems. • The lifting capacity is maximum relative to the jack's extremely low tare weight.

IB - Imperial hexagon reducer bushings
Hydraulic Equipment

IB - Imperial hexagon reducer bushings

Hi-Force hexagon metric bushings are used as an easy and economical method to reduce the size of TWH-NRH cassette heads. The relevant model is determined from the table by selecting the outer AF (across flats) size and the inner AF size. When a reducer bushing is used, the wall thickness (indicated by the letter W in the table) must be added to the cassette minimum diameter value.

ICE-CURT ratchet tensioner with clevis head
Load Securing

ICE-CURT ratchet tensioner with clevis head

Prior to maintenance: Production of the VIP model chain tensioner is being discontinued! However, it is possible to mount the ICE-Curt model to VIP chains in compliance with the relevant specifications. • Exceeds EN 12195-3 standards • Equipped with theft protection device using a padlock (type ABUS 85/40HB) • Equipped with RUD-ID-Point • Easy to clean and lubricate • Features a new, practical and easy-to-use release safety catch • Easy to operate even with gloves • Extremely lightweight and robust thanks to innovative design.

Industrial garage cranes
Crane Technology

Industrial garage cranes

Load capacity up to 3000kg Workshop-type floor cranes are equipment developed for daily or precision applications, offering practical and economical lifting solutions with wide use across the industrial and manufacturing sectors. These cranes can be delivered fixed-mounted or disassembled upon request. When disassembled, the crane can be folded over the chassis. Even in the folded position, the crane can be easily moved via the trolley handle. This feature allows the crane to pass through low-clearance areas (such as 0.5 m) and ensures it takes up minimal space during use. The crane lifting arm features 7 adjustment positions. The crane can be operated at 4 different speeds and can be held in the desired position under load. With 180° mobility, the crane provides precise maneuvering via a control handle equipped with a brake system. Fully complies with CE European occupational safety standards.

IP10 Vertical lifting technique
Lifting Attachments

IP10 Vertical lifting technique

The IP10 vertical lifting clamp with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Horizontal pulling load is possible up to an inclination of 15°. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. for surface hardness up to 27 Rc (900 N/mm²), and 10% of the W.L.L. for surface hardness up to 37 Rc (1170 N/mm²).

IP10/S Vertical lifting and transfer of plates
Lifting Attachments

IP10/S Vertical lifting and transfer of plates

For lifting and turning of stainless steel plates The IP10/S and IPU10/S lifting clamps are suitable for lifting, turning (180°) and vertical transfer of stainless steel plates, profiles and fabrications. These lifting clamps feature a stainless steel jaw and pivot to prevent contact corrosion. 1. IPU10/S: With a universal hinged lifting eye moving in all directions, it allows the user to lift and place the load from any direction. 2. IP10/S: Features a fixed lifting eye. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPBC Horizontal lifting clamps with pretension
Lifting Attachments

IPBC Horizontal lifting clamps with pretension

The IPBC pre-tension safety lifting clamp is suitable for lifting plates and steel beams. It can also be used for turning steel beams (from the H-position to the I-position) and on corrugated plates. This lifting clamp exerts a pre-tension on the material being lifted, such that the clamp remains in an upright position on the plate when the load is lifted or when unloaded. IPBC clamps can be used up to a maximum angle of 60°. They can be used individually or in pairs.

IPBTOZ Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBTOZ Shipbuilding clamp for Holland profiles

The IPBTOZ safety lifting clamp is suitable for use as a temporary tackle eye in spaces reinforced with HP (Holland) profiles, such as engine rooms and ship sections. The IPBTOZ lifting clamp is fitted with a threaded spindle for mounting the clamp. It locks automatically as soon as a load is applied. Clamps with higher WLL and different jaw openings (HP profiles) can be manufactured upon request.

IPBU(U)Z Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBU(U)Z Shipbuilding clamp for Holland profiles

The IPBU(U)Z safety lifting clamp is suitable for vertically lifting, transporting and placing Holland profiles onto ship hull sections. The IPBU(U)Z lifting clamp features a locking device ensuring complete safety in both open and closed positions. Used only for Holland profiles (not to be used for standard plates). Available in two versions: 1. IPBUUZ type: With articulated lifting eye. 2. IPBUZ type: With fixed lifting eye. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. up to a surface hardness of 27 Rc (900 N/mm²), and not less than 10% of the W.L.L. up to a surface hardness of 37 Rc (1170 N/mm²).

IPH10 High lifting capacity - Low weight
Lifting Attachments

IPH10 High lifting capacity - Low weight

IPH10 horizontal safety lifting clamps are suitable for lifting and transporting non-sagging and non-deflecting plates in a horizontal position. Lightweight clamp + spring loaded. IPH10 lifting clamps can also be used suspended vertically under a spreader beam. Lateral loading max. 15°. From 2 tons, equipped with magnet and carrying handle. Clamps with higher capacities and different jaw openings can be produced upon request. Ask us for higher load capacities and different jaw openings!

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock
Lifting Attachments

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock

IPHGUZ horizontal safety lifting clamps are suitable for lifting and transferring steel beams and plates. The IPHGUZ lifting clamp is equipped with a locking device for both open and closed positions that ensures complete safety. These clamps are suitable for use on rolling machines, shears, and press brakes. Available in two versions: 1. IPHGZ: Features a fixed lifting eye. 2. IPHGUZ: Features an articulated lifting eye. Clamps with higher WLL and different jaw openings are available upon request. Please refer to the illustration showing lifting angles for correct usage.

IPHNM10 Horizontal transport of plates
Lifting Attachments

IPHNM10 Horizontal transport of plates

IPHNM10 safety lifting clamps (NM stands for non-marring) can be used in all industries where the material must not be damaged while being lifted and transported. To securely grip delicate plates and transport them horizontally, the jaws of the lifting clamp are made of a synthetic material with a high coefficient of friction. This also applies to smooth-surfaced materials, composite materials, and coated plates, or plates with very hard (impenetrable) surfaces.

IPHOZ Horizontal lifting and transport of plates
Lifting Attachments

IPHOZ Horizontal lifting and transport of plates

IPHOZ horizontal safety lifting clamps are suitable for lifting and transporting sagging or bending plates in the horizontal position. Very lightweight design. The maximum vertical lifting angle with IPHOZ clamps is 60°. IPHOZ lifting clamps can also be used with long chains and two-leg slings.

IPSC Compact system for clamping and pulling
Lifting Attachments

IPSC Compact system for clamping and pulling

The IPSC positioning and pulling clamp is suitable for positioning and turning steel plates and sections. It is specially designed for use as a positioning and pulling clamp. Cannot be used as a lifting clamp! Suitable for steel with a surface hardness up to 30 Rc. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPSTARTEC11 Beam clamp
Lifting Attachments

IPSTARTEC11 Beam clamp

The IP - Startec is a clamp specially designed for lifting, turning, and stacking H and I profiles. Thanks to its special construction, the lifting clamp not only performs load lifting, but also enables the stacking and turning of the load. Depending on the size and weight of the beam, 2 separate IP - Startec clamps are offered with different jaw openings.

IPU10 For gripping in all directions and universal lifting
Lifting Attachments

IPU10 For gripping in all directions and universal lifting

Can be loaded from all directions during lifting, turning and transport The universal vertical lifting clamp IPU10 with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Ask for other jaw types and higher load capacities! • Pulling and lifting load can be applied from all directions up to 90° • Maximum safety ensured by a single safety latch • Type DVA can also be delivered • Test certificate, detailed operating instructions, and CE certificate are supplied with delivery.

IPU10A Automatic clamping universal plate clamp
Lifting Attachments

IPU10A Automatic clamping universal plate clamp

The IPU10A plate clamp engages automatically the moment it is placed onto the material. As long as the safety lock remains in the engaged position, it protects against hazardous situations. It is your greatest asset when manual locking is difficult. Please contact us for different load capacities and jaw openings.

IS - Imperial sockets
Hydraulic Equipment

IS - Imperial sockets

hydraulic equipment Hi-Force high-quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 47 different nut size models available with square drives ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives in sizes from 3/4" to 2 1/2" • Up to 6 7/8" socket size • Retaining pin and safety O-ring

JAH - Aluminium body super jacks
Hydraulic Equipment

JAH - Aluminium body super jacks

These JAH and JAS series lightweight aluminium alloy jacks offer an extremely practical and portable solution with a wide range of capacities and lifting heights. Screwed or plain rams and claw lifting options make these jacks indispensable in maintenance, manufacturing, construction, and heavy-duty plant applications. • Capacities between 20 and 60 tonnes • Stroke lengths between 152 and 305 mm • Overload protection valve • Head or claw lifting functions • Manufactured from aluminium alloy (load-bearing parts made of high-grade steel) • Used in maintenance, manufacturing, construction, and heavy-duty applications

JCS & JCH - Steel compact space-saving jacks
Hydraulic Equipment

JCS & JCH - Steel compact space-saving jacks

Hi-Force JCS series compact jacks are ideal particularly for lifting and positioning operations in confined spaces. They are lightweight, easy to operate, available in steel and aluminium options, all models feature a spring-assisted return, and the piston is hard chrome plated. The pumping mechanism rotates through 360°, allowing versatile operation. The 240mm long detachable operating handle provides ease of use thanks to its compact size. Although sharing the same features and shape as the JCS model compact jacks, it provides versatility across applications thanks to its hollow piston. It is preferred for tooling, maintenance and repair work, and tensioning. Where pulling force is required, pulling can be applied by passing a threaded rod or wire rope through the hollow piston. Multi-purpose JCH compact jacks can also be easily used for lifting operations just like the JCS. • Capacities from 10 tonnes to 30 tonnes • Usable in any position • Lightweight and compact • Spring return piston • Multi-position pumping mechanism • Overload protection valve • Wear-resistant plated piston rod • Sealed hydraulic system • Aluminium and steel options • Capacities from 13 tonnes to 21 tonnes • Usable in any position • Lightweight and compact

JSS - Steel bottle jacks
Hydraulic Equipment

JSS - Steel bottle jacks

Hi-Force JSS series bottle jacks are available in capacities from 3 tonnes to 100 tonnes with stroke lengths ranging from 135 mm to 195 mm. Models up to 16 tonnes feature a screw extension to bridge the gap between the piston and the load. All models include a safety valve and have a tubular pump handle. • Capacities from 3 to 100 tonnes • Robust steel construction • For industrial and automotive applications

KRATOS FLY'IN 3 FULL BODY HARNESS
Personnel Safety

KRATOS FLY'IN 3 FULL BODY HARNESS

FA1020200 FLY'IN 3 KRATOS FULL BODY HARNESS

Large impact wrench
Hydraulic Equipment

Large impact wrench

• Heavy vehicle tire service • Construction machinery maintenance and assembly • U-bolt applications for heavy vehicles

Lifting beams with suspension hooks
Lifting Attachments

Lifting beams with suspension hooks

Combinable, adjustable beam-type and H-frame lifting beams A lifting beam can be used for many years in a wide variety of tasks. A lifting beam that is suitable today may perhaps become too large for a new crane system in the future. The Marca lifting beam is fully equipped for this and is always adaptable to modifications. Unsafe and time-consuming modifications are no longer necessary. lifting attachments Guide notches are cut into the steel profile flange faces. With integrated guidance, displacement of the hook plate is prevented and the lifting beam operates more rigidly. Thanks to this new Marca lifting beam design, the construction becomes sturdier and more stable, allowing the load to be safely lifted in a single operation without lowering and re-lifting. This speeds up the handling process. Marca Beam-Type Lifting Beam (including frame hook suspensions) Adjustable length = 1/2 total length Super-compact design with extremely robust special steel. The hooks of modern crane systems are now manufactured smaller from high-alloy steel, which is why older lifting beams no longer fit. Marca lifting beams are interchangeable and can be adjusted at a later stage.

Magnetic claws used on cranes
Lifting Attachments

Magnetic claws used on cranes

The magnetic claw is suitable for vertical or horizontal lifting. Lifted sheet metals can be turned from a vertical to a horizontal position or vice versa. Only 1 magnet is required for sheet dimensions of 1000x2000 mm, and 2 lifting magnets with a small spreader beam are required for 1500x3000 mm sheets. **With double safety when used on cranes ***3-fold safety when used on cranes. Safely used on ground St37k steel up to a thickness of 25 mm. Please note! Full holding force is only achieved on materials with smooth, flat, clean surfaces, good magnetizability, and sufficient thickness. On rusted and scaled materials, the holding force is 2/3 for magnetic claws and 50% for load lifting magnets.

Manibox VS Worm gear winches
Manual Lifting Equipment

Manibox VS Worm gear winches

Manibox VS in capacities from 250kg to 3000kg If you need different console type winches, (e.g. stainless steel) call 2M. • Used for lifting and pulling. • Floor or wall mounted. • Industry • Theatre (stage-scenery) • Water treatment & retention facilities • Barges and trailers • Suspension applications • High safety is ensured with worm gear and automatic brake system. • Gear wheel spring is stainless steel. • Mechanical parts are machined parts and treated with cataphoresis coating. • Mechanical parts are inside a metal casing. • Using the release lock (except VS 250), the rope can be quickly unwound from the drum. Must not be applied under load. • Features a crank handle adjustment knob.

Manifolds
Hydraulic Equipment

Manifolds

Hi-Force manifolds are specially designed to distribute hydraulic flow as required. Both open-type manifolds and valve-controlled (shut-off/throttling) type manifolds are available. All valve outlets are 3/8". There are 9 different manifold models available with up to 8 outlets. Compatible with single-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, with all components mounted on the unit. Compatible with double-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, and includes 4 open manifolds for return flow. All components are mounted on the unit. • Working pressure 700 bar • Open or valve-type manifold options • Models with 2, 4, 5, 6, or 8 outlets

2M
Lifting Attachments

Marca forklift fork crossbeam

Marca forklift fork crossbeams can be applied to forklifts of all sizes. Standardly manufactured up to 10 tons, crossbeams can also be ordered with higher load capacities upon request. We recommend using a swivel hook on fork crossbeams. • No loss of lifting height thanks to low headroom • Manufactured to your required dimensions • Delivered galvanized upon request • Swivel suspension hook is available as standard. Optional equipment: Ball-bearing swivel hook for rotating under load.

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)
Lifting Attachments

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)

Marca-Drum clamp VFR is highly suitable for stacking upright rimmed drums. The hold-open lever enhances its easy and simple usability.

Marca-Plate lifting clamp: TLH - TLR
Lifting Attachments

Marca-Plate lifting clamp: TLH - TLR

Marca-TLH type plate lifting clamp helps you horizontally transport single or multiple plates up to 150 mm thickness and a capacity of up to 5 tons/pc. TLR type clamps allow you to transport plates or bundles up to 300 mm thickness.

MB - Metric hexagon reducer bushings
Hydraulic Equipment

MB - Metric hexagon reducer bushings

Hi-Force metric hexagon bushings are used as an easy and economical method to reduce the size of TWH-NRH cassette heads. The relevant model is determined from the table by selecting the external AF (across flats) size and internal AF size. When using a reducer bushing, the wall thickness (indicated by the letter W in the table) must be added to the cassette's minimum diameter value.

Mechanical chain hoists
Manual Lifting Equipment

Mechanical chain hoists

Superior technology in Tralift® mechanical chain hoists, manual lifting from 250kg to 20 tons Extremely safe, lightweight, compact and economical, Tralift® hoists are equipped with maintenance-free 360° swiveling forged steel hooks with safety latches, custom-manufactured high-strength GRADE 80 RUD/Germany hoist chains compliant with DIN 5684, a special braking system, and load limiters. Tralift® is delivered with a CE European occupational safety certificate and test report. Tralift® hoist chains are stocked in continuous lengths, and genuine RUD/Germany chains are fitted to the required length by our technicians. • Extended load and hand chains for higher suspension heights • Hoists with load limiter

2M
Hydraulic Equipment

Medium Size Impact Wrenches

• 1/4"(6.35mm) HEX.DR./3/8" (9.5mm) SQ.DR. • Loosening nuts, bolts, drive screws and screws under 8mm in light-duty work • Assembly and disassembly of small engines • Disassembly and fastening for fenders, bumpers and interior parts

MFS - Mechanical flange spreaders
Hydraulic Equipment

MFS - Mechanical flange spreaders

MFS series mechanical flange spreaders are available in 6 different models. • Suitable for bolt diameters up to 31 mm • Maximum opening 231 mm • Requires no external power source

MHP - Manual hydrotest pump
Hydraulic Equipment

MHP - Manual hydrotest pump

Hi-Force MHP series 2-speed manual hydraulic pumps can be used with a wide variety of fluids, including water. Manufactured from aluminium alloy, they are extremely lightweight and offer versatile use. Featuring a semi-automatic stage changeover and 2-stage piston design, they provide a high flow rate up to 20 bar pressure. Available in 5 different models with working pressures from 100 bar up to 1000 bar, they are supplied with a 610 mm long pump handle. Primary areas of application include pipelines, pressure vessels, pressure valve applications, and all similar pressurised applications. • Working pressure up to 1000 bar • Suitable for use with various fluid types • Flow rate adjusted according to pressure via semi-automatic stage changeover • Stainless steel pistons and lightweight aluminium pump construction • Needle-type pressure release valve for precise pressure control • Economical, replaceable valve seats • 15-litre fluid reservoir as standard • Optional pressure gauges available

MS - Metric Sockets
Hydraulic Equipment

MS - Metric Sockets

Hi-Force's high quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 53 models in different nut sizes with square drive sizes ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives from 3/4" to 2 1/2" • Up to 145 mm socket size • Fixing pin and retaining O-ring

New double hook
Lifting Attachments

New double hook

Lifting accessories such as round slings or webbing slings must not lie on top of each other on the hook, as there is a risk of damage due to crushing of the lower element. By distributing the lifting accessories across both hooks, damage or a reduction in load capacity is prevented.

New generation pneumatic wheel nut torquing - Kuken PTS-1000E/800E
Hydraulic Equipment

New generation pneumatic wheel nut torquing - Kuken PTS-1000E/800E

Suitable for JIS and ISO systems. (Reaction absorber is optional for ISO systems) • Low vibration and low noise level • Tightening torque control system enhanced with built-in electronic control • Automatic shut-off upon reaching the set torque • Automatic detection of tightening and loosening • High torque applicable when required for loosening operations • One-touch two-handed operation • Battery pack (AA battery x 6), no external power supply required. • 2-step start switch for safety • Ultra-bright white LED light for working even in dark areas • Bus or truck wheel nut tightening and loosening • For nut and bolt torquing, assembly and disassembly in various structures