+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

76–100 of 211 productsPer page102550100
▦ Grid☰ List
IPSC Compact system for clamping and pulling
Lifting Attachments

IPSC Compact system for clamping and pulling

The IPSC positioning and pulling clamp is suitable for positioning and turning steel plates and sections. It is specially designed for use as a positioning and pulling clamp. Cannot be used as a lifting clamp! Suitable for steel with a surface hardness up to 30 Rc. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPSTARTEC11 Beam clamp
Lifting Attachments

IPSTARTEC11 Beam clamp

The IP - Startec is a clamp specially designed for lifting, turning, and stacking H and I profiles. Thanks to its special construction, the lifting clamp not only performs load lifting, but also enables the stacking and turning of the load. Depending on the size and weight of the beam, 2 separate IP - Startec clamps are offered with different jaw openings.

IPU10 For gripping in all directions and universal lifting
Lifting Attachments

IPU10 For gripping in all directions and universal lifting

Can be loaded from all directions during lifting, turning and transport The universal vertical lifting clamp IPU10 with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Ask for other jaw types and higher load capacities! • Pulling and lifting load can be applied from all directions up to 90° • Maximum safety ensured by a single safety latch • Type DVA can also be delivered • Test certificate, detailed operating instructions, and CE certificate are supplied with delivery.

IPU10A Automatic clamping universal plate clamp
Lifting Attachments

IPU10A Automatic clamping universal plate clamp

The IPU10A plate clamp engages automatically the moment it is placed onto the material. As long as the safety lock remains in the engaged position, it protects against hazardous situations. It is your greatest asset when manual locking is difficult. Please contact us for different load capacities and jaw openings.

IS - Imperial sockets
Hydraulic Equipment

IS - Imperial sockets

hydraulic equipment Hi-Force high-quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 47 different nut size models available with square drives ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives in sizes from 3/4" to 2 1/2" • Up to 6 7/8" socket size • Retaining pin and safety O-ring

JAH - Aluminium body super jacks
Hydraulic Equipment

JAH - Aluminium body super jacks

These JAH and JAS series lightweight aluminium alloy jacks offer an extremely practical and portable solution with a wide range of capacities and lifting heights. Screwed or plain rams and claw lifting options make these jacks indispensable in maintenance, manufacturing, construction, and heavy-duty plant applications. • Capacities between 20 and 60 tonnes • Stroke lengths between 152 and 305 mm • Overload protection valve • Head or claw lifting functions • Manufactured from aluminium alloy (load-bearing parts made of high-grade steel) • Used in maintenance, manufacturing, construction, and heavy-duty applications

JCS & JCH - Steel compact space-saving jacks
Hydraulic Equipment

JCS & JCH - Steel compact space-saving jacks

Hi-Force JCS series compact jacks are ideal particularly for lifting and positioning operations in confined spaces. They are lightweight, easy to operate, available in steel and aluminium options, all models feature a spring-assisted return, and the piston is hard chrome plated. The pumping mechanism rotates through 360°, allowing versatile operation. The 240mm long detachable operating handle provides ease of use thanks to its compact size. Although sharing the same features and shape as the JCS model compact jacks, it provides versatility across applications thanks to its hollow piston. It is preferred for tooling, maintenance and repair work, and tensioning. Where pulling force is required, pulling can be applied by passing a threaded rod or wire rope through the hollow piston. Multi-purpose JCH compact jacks can also be easily used for lifting operations just like the JCS. • Capacities from 10 tonnes to 30 tonnes • Usable in any position • Lightweight and compact • Spring return piston • Multi-position pumping mechanism • Overload protection valve • Wear-resistant plated piston rod • Sealed hydraulic system • Aluminium and steel options • Capacities from 13 tonnes to 21 tonnes • Usable in any position • Lightweight and compact

JSS - Steel bottle jacks
Hydraulic Equipment

JSS - Steel bottle jacks

Hi-Force JSS series bottle jacks are available in capacities from 3 tonnes to 100 tonnes with stroke lengths ranging from 135 mm to 195 mm. Models up to 16 tonnes feature a screw extension to bridge the gap between the piston and the load. All models include a safety valve and have a tubular pump handle. • Capacities from 3 to 100 tonnes • Robust steel construction • For industrial and automotive applications

KRATOS FLY'IN 3 FULL BODY HARNESS
Personnel Safety

KRATOS FLY'IN 3 FULL BODY HARNESS

FA1020200 FLY'IN 3 KRATOS FULL BODY HARNESS

Large impact wrench
Hydraulic Equipment

Large impact wrench

• Heavy vehicle tire service • Construction machinery maintenance and assembly • U-bolt applications for heavy vehicles

Lifting beams with suspension hooks
Lifting Attachments

Lifting beams with suspension hooks

Combinable, adjustable beam-type and H-frame lifting beams A lifting beam can be used for many years in a wide variety of tasks. A lifting beam that is suitable today may perhaps become too large for a new crane system in the future. The Marca lifting beam is fully equipped for this and is always adaptable to modifications. Unsafe and time-consuming modifications are no longer necessary. lifting attachments Guide notches are cut into the steel profile flange faces. With integrated guidance, displacement of the hook plate is prevented and the lifting beam operates more rigidly. Thanks to this new Marca lifting beam design, the construction becomes sturdier and more stable, allowing the load to be safely lifted in a single operation without lowering and re-lifting. This speeds up the handling process. Marca Beam-Type Lifting Beam (including frame hook suspensions) Adjustable length = 1/2 total length Super-compact design with extremely robust special steel. The hooks of modern crane systems are now manufactured smaller from high-alloy steel, which is why older lifting beams no longer fit. Marca lifting beams are interchangeable and can be adjusted at a later stage.

Magnetic claws used on cranes
Lifting Attachments

Magnetic claws used on cranes

The magnetic claw is suitable for vertical or horizontal lifting. Lifted sheet metals can be turned from a vertical to a horizontal position or vice versa. Only 1 magnet is required for sheet dimensions of 1000x2000 mm, and 2 lifting magnets with a small spreader beam are required for 1500x3000 mm sheets. **With double safety when used on cranes ***3-fold safety when used on cranes. Safely used on ground St37k steel up to a thickness of 25 mm. Please note! Full holding force is only achieved on materials with smooth, flat, clean surfaces, good magnetizability, and sufficient thickness. On rusted and scaled materials, the holding force is 2/3 for magnetic claws and 50% for load lifting magnets.

Manibox VS Worm gear winches
Manual Lifting Equipment

Manibox VS Worm gear winches

Manibox VS in capacities from 250kg to 3000kg If you need different console type winches, (e.g. stainless steel) call 2M. • Used for lifting and pulling. • Floor or wall mounted. • Industry • Theatre (stage-scenery) • Water treatment & retention facilities • Barges and trailers • Suspension applications • High safety is ensured with worm gear and automatic brake system. • Gear wheel spring is stainless steel. • Mechanical parts are machined parts and treated with cataphoresis coating. • Mechanical parts are inside a metal casing. • Using the release lock (except VS 250), the rope can be quickly unwound from the drum. Must not be applied under load. • Features a crank handle adjustment knob.

Manifolds
Hydraulic Equipment

Manifolds

Hi-Force manifolds are specially designed to distribute hydraulic flow as required. Both open-type manifolds and valve-controlled (shut-off/throttling) type manifolds are available. All valve outlets are 3/8". There are 9 different manifold models available with up to 8 outlets. Compatible with single-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, with all components mounted on the unit. Compatible with double-acting cylinder systems, the 4-way controlled manifold unit is equipped with four 700 bar capacity pressure gauges, 1 female inlet port, and 4 outlet ports, and includes 4 open manifolds for return flow. All components are mounted on the unit. • Working pressure 700 bar • Open or valve-type manifold options • Models with 2, 4, 5, 6, or 8 outlets

2M
Lifting Attachments

Marca forklift fork crossbeam

Marca forklift fork crossbeams can be applied to forklifts of all sizes. Standardly manufactured up to 10 tons, crossbeams can also be ordered with higher load capacities upon request. We recommend using a swivel hook on fork crossbeams. • No loss of lifting height thanks to low headroom • Manufactured to your required dimensions • Delivered galvanized upon request • Swivel suspension hook is available as standard. Optional equipment: Ball-bearing swivel hook for rotating under load.

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)
Lifting Attachments

Marca-Drum clamp VFR (Semi-automatic), VFA (Fully automatic)

Marca-Drum clamp VFR is highly suitable for stacking upright rimmed drums. The hold-open lever enhances its easy and simple usability.

Marca-Plate lifting clamp: TLH - TLR
Lifting Attachments

Marca-Plate lifting clamp: TLH - TLR

Marca-TLH type plate lifting clamp helps you horizontally transport single or multiple plates up to 150 mm thickness and a capacity of up to 5 tons/pc. TLR type clamps allow you to transport plates or bundles up to 300 mm thickness.

MB - Metric hexagon reducer bushings
Hydraulic Equipment

MB - Metric hexagon reducer bushings

Hi-Force metric hexagon bushings are used as an easy and economical method to reduce the size of TWH-NRH cassette heads. The relevant model is determined from the table by selecting the external AF (across flats) size and internal AF size. When using a reducer bushing, the wall thickness (indicated by the letter W in the table) must be added to the cassette's minimum diameter value.

Mechanical chain hoists
Manual Lifting Equipment

Mechanical chain hoists

Superior technology in Tralift® mechanical chain hoists, manual lifting from 250kg to 20 tons Extremely safe, lightweight, compact and economical, Tralift® hoists are equipped with maintenance-free 360° swiveling forged steel hooks with safety latches, custom-manufactured high-strength GRADE 80 RUD/Germany hoist chains compliant with DIN 5684, a special braking system, and load limiters. Tralift® is delivered with a CE European occupational safety certificate and test report. Tralift® hoist chains are stocked in continuous lengths, and genuine RUD/Germany chains are fitted to the required length by our technicians. • Extended load and hand chains for higher suspension heights • Hoists with load limiter

2M
Hydraulic Equipment

Medium Size Impact Wrenches

• 1/4"(6.35mm) HEX.DR./3/8" (9.5mm) SQ.DR. • Loosening nuts, bolts, drive screws and screws under 8mm in light-duty work • Assembly and disassembly of small engines • Disassembly and fastening for fenders, bumpers and interior parts

MFS - Mechanical flange spreaders
Hydraulic Equipment

MFS - Mechanical flange spreaders

MFS series mechanical flange spreaders are available in 6 different models. • Suitable for bolt diameters up to 31 mm • Maximum opening 231 mm • Requires no external power source

MHP - Manual hydrotest pump
Hydraulic Equipment

MHP - Manual hydrotest pump

Hi-Force MHP series 2-speed manual hydraulic pumps can be used with a wide variety of fluids, including water. Manufactured from aluminium alloy, they are extremely lightweight and offer versatile use. Featuring a semi-automatic stage changeover and 2-stage piston design, they provide a high flow rate up to 20 bar pressure. Available in 5 different models with working pressures from 100 bar up to 1000 bar, they are supplied with a 610 mm long pump handle. Primary areas of application include pipelines, pressure vessels, pressure valve applications, and all similar pressurised applications. • Working pressure up to 1000 bar • Suitable for use with various fluid types • Flow rate adjusted according to pressure via semi-automatic stage changeover • Stainless steel pistons and lightweight aluminium pump construction • Needle-type pressure release valve for precise pressure control • Economical, replaceable valve seats • 15-litre fluid reservoir as standard • Optional pressure gauges available

MS - Metric Sockets
Hydraulic Equipment

MS - Metric Sockets

Hi-Force's high quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 53 models in different nut sizes with square drive sizes ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives from 3/4" to 2 1/2" • Up to 145 mm socket size • Fixing pin and retaining O-ring

New double hook
Lifting Attachments

New double hook

Lifting accessories such as round slings or webbing slings must not lie on top of each other on the hook, as there is a risk of damage due to crushing of the lower element. By distributing the lifting accessories across both hooks, damage or a reduction in load capacity is prevented.

New generation pneumatic wheel nut torquing - Kuken PTS-1000E/800E
Hydraulic Equipment

New generation pneumatic wheel nut torquing - Kuken PTS-1000E/800E

Suitable for JIS and ISO systems. (Reaction absorber is optional for ISO systems) • Low vibration and low noise level • Tightening torque control system enhanced with built-in electronic control • Automatic shut-off upon reaching the set torque • Automatic detection of tightening and loosening • High torque applicable when required for loosening operations • One-touch two-handed operation • Battery pack (AA battery x 6), no external power supply required. • 2-step start switch for safety • Ultra-bright white LED light for working even in dark areas • Bus or truck wheel nut tightening and loosening • For nut and bolt torquing, assembly and disassembly in various structures