+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

71–80 of 211 productsPer page102550100
▦ Grid☰ List
IPBU(U)Z Shipbuilding clamp for Holland profiles
Lifting Attachments

IPBU(U)Z Shipbuilding clamp for Holland profiles

The IPBU(U)Z safety lifting clamp is suitable for vertically lifting, transporting and placing Holland profiles onto ship hull sections. The IPBU(U)Z lifting clamp features a locking device ensuring complete safety in both open and closed positions. Used only for Holland profiles (not to be used for standard plates). Available in two versions: 1. IPBUUZ type: With articulated lifting eye. 2. IPBUZ type: With fixed lifting eye. Minimum permissible load: The load to be lifted must not be less than 5% of the W.L.L. up to a surface hardness of 27 Rc (900 N/mm²), and not less than 10% of the W.L.L. up to a surface hardness of 37 Rc (1170 N/mm²).

IPH10 High lifting capacity - Low weight
Lifting Attachments

IPH10 High lifting capacity - Low weight

IPH10 horizontal safety lifting clamps are suitable for lifting and transporting non-sagging and non-deflecting plates in a horizontal position. Lightweight clamp + spring loaded. IPH10 lifting clamps can also be used suspended vertically under a spreader beam. Lateral loading max. 15°. From 2 tons, equipped with magnet and carrying handle. Clamps with higher capacities and different jaw openings can be produced upon request. Ask us for higher load capacities and different jaw openings!

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock
Lifting Attachments

IPHGUZ Heavy-duty horizontal lifting clamps with safety lock

IPHGUZ horizontal safety lifting clamps are suitable for lifting and transferring steel beams and plates. The IPHGUZ lifting clamp is equipped with a locking device for both open and closed positions that ensures complete safety. These clamps are suitable for use on rolling machines, shears, and press brakes. Available in two versions: 1. IPHGZ: Features a fixed lifting eye. 2. IPHGUZ: Features an articulated lifting eye. Clamps with higher WLL and different jaw openings are available upon request. Please refer to the illustration showing lifting angles for correct usage.

IPHNM10 Horizontal transport of plates
Lifting Attachments

IPHNM10 Horizontal transport of plates

IPHNM10 safety lifting clamps (NM stands for non-marring) can be used in all industries where the material must not be damaged while being lifted and transported. To securely grip delicate plates and transport them horizontally, the jaws of the lifting clamp are made of a synthetic material with a high coefficient of friction. This also applies to smooth-surfaced materials, composite materials, and coated plates, or plates with very hard (impenetrable) surfaces.

IPHOZ Horizontal lifting and transport of plates
Lifting Attachments

IPHOZ Horizontal lifting and transport of plates

IPHOZ horizontal safety lifting clamps are suitable for lifting and transporting sagging or bending plates in the horizontal position. Very lightweight design. The maximum vertical lifting angle with IPHOZ clamps is 60°. IPHOZ lifting clamps can also be used with long chains and two-leg slings.

IPSC Compact system for clamping and pulling
Lifting Attachments

IPSC Compact system for clamping and pulling

The IPSC positioning and pulling clamp is suitable for positioning and turning steel plates and sections. It is specially designed for use as a positioning and pulling clamp. Cannot be used as a lifting clamp! Suitable for steel with a surface hardness up to 30 Rc. Clamps with higher WLL and different jaw openings can be manufactured upon request.

IPSTARTEC11 Beam clamp
Lifting Attachments

IPSTARTEC11 Beam clamp

The IP - Startec is a clamp specially designed for lifting, turning, and stacking H and I profiles. Thanks to its special construction, the lifting clamp not only performs load lifting, but also enables the stacking and turning of the load. Depending on the size and weight of the beam, 2 separate IP - Startec clamps are offered with different jaw openings.

IPU10 For gripping in all directions and universal lifting
Lifting Attachments

IPU10 For gripping in all directions and universal lifting

Can be loaded from all directions during lifting, turning and transport The universal vertical lifting clamp IPU10 with safety lock is used for lifting, turning (180°) and vertical transport of steel plates and structures. Ask for other jaw types and higher load capacities! • Pulling and lifting load can be applied from all directions up to 90° • Maximum safety ensured by a single safety latch • Type DVA can also be delivered • Test certificate, detailed operating instructions, and CE certificate are supplied with delivery.

IPU10A Automatic clamping universal plate clamp
Lifting Attachments

IPU10A Automatic clamping universal plate clamp

The IPU10A plate clamp engages automatically the moment it is placed onto the material. As long as the safety lock remains in the engaged position, it protects against hazardous situations. It is your greatest asset when manual locking is difficult. Please contact us for different load capacities and jaw openings.

IS - Imperial sockets
Hydraulic Equipment

IS - Imperial sockets

hydraulic equipment Hi-Force high-quality imperial size sockets can be used with both hydraulic torque wrenches and impact wrenches. There are 47 different nut size models available with square drives ranging from 3/4" to 2 1/2". Sockets with different specifications are manufactured upon request. • Square drives in sizes from 3/4" to 2 1/2" • Up to 6 7/8" socket size • Retaining pin and safety O-ring