+90 212 504 90 00info@2mmakina.com.tr
Get a Quote
2M Makina

Products

Wire rope and chain slings, hooks, hydraulic equipment and connectors. Pick the right product by capacity, size and certification.

211 products

Subcategories

All Products

176–200 of 211 productsPer page102550100
▦ Grid☰ List
ICE-120 IWK-2S / IAK-2S - ICE master link with balancing triangle
Lifting Slings

ICE-120 IWK-2S / IAK-2S - ICE master link with balancing triangle

For use with 2-leg slings • IA link with VKZA • VIP shackle • Balancing triangle • 2 ICE connecting links

ICE-120 Shortenable chain slings — with IVH shortening claw
Lifting Slings

ICE-120 Shortenable chain slings — with IVH shortening claw

ICE chain sling, 1-leg, terminated with ICE Star hook with IVH shortening claw

INOX-Star Stainless steel bolt-on lifting point
Lifting Slings

INOX-Star Stainless steel bolt-on lifting point

• Pentagonal - clear distinction from DIN 580 eye bolt (eyebolt) • Rotatable 360°, adjustable in the direction of pull. • Clear working load limit indication for the non-permissible load range. 4:1 safety factor against breakage. • Hardened ring body • Ring body and bolt material: 14462, duplex steel • 100% crack tested • Bolt is captively mounted • Patented wear marks on the ring body

OLEC Eye-clevis ball bearing swivel
Lifting Slings

OLEC Eye-clevis ball bearing swivel

Omega link (Code: CO), pear-shaped link (Code: MP) or clevis hooks (XLC-GKC-CSC).

Stainless steel chain sling master link 316L (MS-MTS)
Lifting Slings

Stainless steel chain sling master link 316L (MS-MTS)

Welded links feature a flat section to facilitate easier connection with omega links (code COI) for 1-2 leg chain slings (code MS) and 3-4 leg chain slings (MTS).

PowerPoint series Multi-purpose use
Lifting Slings

PowerPoint series Multi-purpose use

• Loadable in all directions with 360° rotation. • Clear marking of nominal load capacity. • 4:1 tested minimum safety factor • Easily rotatable under load with double ball bearings. • Ergonomic and practical design. • Made of CrNiMo steel, specially heat-treated. • 100% crack-tested by X-ray on every part. • Load capacity calculated based on the smallest bolt size. • Threaded studs can be ordered in various lengths. • Fluorescent pink powder-coated components. • Correct and practical use allows costs to be quickly amortized, and safe handling prevents potential damage.

RS/RM Eye bolt/nut
Lifting Slings

RS/RM Eye bolt/nut

High-strength fixed lifting points not requiring swiveling The RS/RM eye nut/bolt must not be subjected to lateral loads. Therefore, it is not suitable for multi-leg sling systems. Use Star point VRS or VRM for lateral loads. • Difference from conventional ring-type eyebolts: The red color and octagonal shape signify Grade 80 quality class. • Identification: Unsuitable loading area, clear working load limit indication for transverse loading. (Not permitted for DIN 580/DIN 582. • Forged, 100% electromagnetic crack tested according to EN-1677-1: Material S235JR (1.0037/St 37) • Safety certified by the Trade Association "Iron and Metal" testing committee for the use of RS eye nuts. • On "RM" eye bolts, 100% engagement of the bolt thread is required. Bolt quality 8.8. • Available with inch and special threads. • Ensure that the nut/bolt is properly seated. • Turning movements must be avoided during transport. • A flat bolting surface (E) must be provided.

VCGH-S Heavy-duty hook
Lifting Slings

VCGH-S Heavy-duty hook

• Robust hook for bolt-on or weld-on applications, especially suitable for use with wire ropes and master links. • Robust hook latch prevents unintentional disengagement of the lifting gear.

VIP MAXI 28 X 84 MAXI-Program
Lifting Slings

VIP MAXI 28 X 84 MAXI-Program

The largest available size

VIP-100 Master links for small crane hooks
Lifting Slings

VIP-100 Master links for small crane hooks

Extra flexible, extra strong, extra safe for small crane hooks Order example: VBK.1.V0.20: VIP master link, 1-leg, VBK-1, chain diameter 20 mm

VIP-100 UW-PP - VIP-Universal swivels
Lifting Slings

VIP-100 UW-PP - VIP-Universal swivels

• Rotatable under load due to ball bearing. • Patented clevis connection • Can be loaded from any direction • Only use VIP chains and components approved by RUD

VIP-100 VBMHWA - VIP-Rebar hook, ball bearing
Lifting Slings

VIP-100 VBMHWA - VIP-Rebar hook, ball bearing

It is extremely important to use the right hook for the job on construction sites and in your facility. Forged hooks tailored to your requirements are manufactured to order.

VIP-100 VCG - VIP - Complete safety chain with overload indicator
Lifting Slings

VIP-100 VCG - VIP - Complete safety chain with overload indicator

Permanent visual indication in the event of an overload via a permanently installed, specially calibrated control link VCG, yet easily replaceable using the VVS-V connecting link. Immediate permanent visual indication in case of overload – with specially calibrated RUD control link VCG. Do not exceed the permissible working load limit! The calibrated gap width equals the specified nominal value. • Connecting link VVS-V • Simple hammer assembly (foolproof chain connection) • Control link VCG • With indicator bars and calibrated gap width (nominal... mm) • VIP chain, link • Additional safety element (chain) via bypass connection

VIP-100 VCGH - VIP - Cobra chain hook
Lifting Slings

VIP-100 VCGH - VIP - Cobra chain hook

• VIP lifting hook with safety latch • Hook body features gauge marks for checking throat opening and wear.

VIP-100 VGIL - VIP - ILG
Lifting Slings

VIP-100 VGIL - VIP - ILG

Danger from electrical current is no problem with VIP-ILG! Protect your crane and yourself when welding on suspended loads. Clevis links embedded in a special plastic in the VIP-IL suspension insulate against electric current. Can be used up to 1000 Volt and max 80°C operating temperature. Here, the hoist hook or crane hook must definitely be swivel-mounted. An additional swivel is not required.

VIP-100 VIP Container hook VCH-SL
Lifting Slings

VIP-100 VIP Container hook VCH-SL

Attaching: Automatically opening and closing without pressing the lock Detaching: Only by pressing the locking pin of the VIP container hook VCH • Compatible with ISO container corners. • The container hook is equipped with a patented lock. Disengagement from the ISO corner during lifting is no longer possible. • RUD VCH-SL hooks are suitable for vertical lifting and lifting at a maximum inclination angle of 45. • Clevis connection for size 16 VIP chain.

VIP-100 VVS-VIP - Connecting link
Lifting Slings

VIP-100 VVS-VIP - Connecting link

Third-party connections, e.g. lifting points, plate clamps, etc., can be attached to the wide clevis half (A2). Link halves can be combined with each other. The safety pin remains secure and cannot be damaged. Only the matching VIP chain or overload link can be fitted non-interchangeably (A1) into the link half with the hardened pin insert.

VIP-100 VW- VIP Balancer triangle
Lifting Slings

VIP-100 VW- VIP Balancer triangle

Our recommendation: With the VIP 2x2-leg balancer triangle, equal load distribution is achieved across all 4 legs, providing 33% higher load capacity compared to standard 4-leg slings. Higher load capacity: When using two-leg slings where a triangle (VWK 2S) is attached to one sling leg - suspended from both crane hooks - 4 load-bearing legs can be taken into account up to angles of 45° (BGR 500) with symmetrical load distribution. Use: The load capacity can be increased provided it is used at a slinging angle of no more than 10%. Since there are 4 load-bearing legs, higher weights can be lifted with the same chain. • While the upper connection of the balancer triangle is made with a shackle, • The lower connection is made with VIP connecting links or VIP shackles. • The maximum inclination angle of 10° marked on the bottom of the balancer triangle can be easily checked. • Suitable for RUD-ID-Point. • Detailed information about the VIP balancer triangle can be found in the operating instructions. • On 4-leg slings, a maximum of 3 load-bearing legs can be used. Under unfavorable conditions, 2 legs can be used.